9.1.5 Default Message Contents for Supplementary Services
34.1083GPPCommon test environments for User Equipment (UE)Conformance testingRelease 15TS
9.1.5.1 Default contents for RRC messages
Contents of RRC CONNECTION REQUEST message: TM
IEs not listed below should be set and checked according to 9.1.1 or 9.1.2.
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Establishment cause |
Originating High Priority Signalling |
9.1.5.2 Default contents for NAS messages
9.1.5.2.1 Default contents for MM messages
Contents of MM INFORMATION:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Full name for network |
Not present |
||
|
Short name for network |
Not present |
||
|
Local time zone |
Not present |
||
|
Universal time and local time zone |
Not present |
||
|
LSA Identity |
Not present |
||
|
Network Daylight Saving Time |
Not present |
||
|
NOTE: In the test case specific message contents at least one of these IE’s shall be specified as present. |
|||
9.1.5.2.2 Default contents for CC messages
Contents of CM SERVICE REQUEST message:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
CM service type |
SS |
‘1000’ B |
|
|
CC |
‘0001’B |
||
|
Ciphering key sequence Number |
Correct value |
||
|
Mobile station classmark |
Not checked |
||
|
Mobile identity |
TMSI |
||
|
Priority |
Not present |
|
Condition |
Explanation |
|
SS |
For Supplementary Services Activation |
|
CC |
For Mobile originated Call Establishment or packet mode connection establishment |
Contents of FACILITY with Invoke component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Protocol discriminator |
1011 B (non call related SS messages) or 0011 B (call control; call related SS messages) |
||
|
Transaction identifier |
See the specific test case |
||
|
Message Type |
0011 1010 B, if the message is sent by the SS |
||
|
Facility IE |
|||
|
– Length of Facility IE contents |
8 |
||
|
– Component type tag |
1010 0001 B (invoke) |
||
|
– Component length |
6 |
||
|
– Invoke ID tag |
0000 0010 B (invoke ID) |
||
|
– Invoke ID length |
1 |
||
|
– Invoke ID |
An arbitrary integer value. The same value must be used in the subsequent corresponding Return Result, Return Error or Reject component. |
||
|
– Linked ID tag |
Not present |
||
|
– Linked ID length |
Not present |
||
|
– Linked ID |
Not present |
||
|
– Operation Code tag |
0000 0010 B |
||
|
– Operation Code length |
1 |
||
|
– Operation Code |
See the specific test case |
||
|
– Parameters |
Not present |
||
|
SS Version Indicator |
Not checked, IE not present if message is sent by SS. |
||
|
NOTE: Bits 7 and 8 are not checked, as these bits are reserved for the send sequence number in messages sent from the UE. |
|||
Contents of FACILITY with Reject component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Protocol discriminator |
1011 B (non call related SS messages) or 0011 B (call control; call related SS messages) |
||
|
Transaction identifier |
See the specific test case |
||
|
Message Type |
0011 1010 B, if the message is sent by the SS |
||
|
Facility IE |
|||
|
– Length of Facility IE contents |
8 |
||
|
– Component type tag |
1010 0100 B (reject) |
||
|
– Component length |
6 |
||
|
– Invoke ID tag |
0000 0010 B (invoke ID) |
||
|
– Invoke ID length |
1 |
||
|
– Invoke ID |
The same value that has been used in the corresponding Invoke component. |
||
|
– Problem Code tag |
See the specific test case |
||
|
– Problem Code length |
1 |
||
|
– Problem Code |
See the specific test case |
||
|
SS Version Indicator |
Not checked, IE not present if message is sent by SS. |
||
|
NOTE: Bits 7 and 8 are not checked, as these bits are reserved for the send sequence number in messages sent from the UE. |
|||
Contents of FACILITY with Return Error component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Protocol discriminator |
1011 B (non call related SS messages) or 0011 B (call control; call related SS messages) |
||
|
Transaction identifier |
See the specific test case |
||
|
Message Type |
0011 1010 B, if the message is sent by the SS |
||
|
Facility IE |
|||
|
– Length of Facility IE contents |
8 |
||
|
– Component type tag |
1010 0011 B (return error) |
||
|
– Component length |
6 |
||
|
– Invoke ID tag |
0000 0010 B (invoke ID) |
||
|
– Invoke ID length |
1 |
||
|
– Invoke ID |
The same value that has been used in the corresponding Invoke component. |
||
|
– Error Code tag |
0000 0010 B |
||
|
– Error Code length |
1 |
||
|
– Error Code |
See the specific test case |
||
|
– Parameters |
Not present |
||
|
SS Version Indicator |
Not checked, IE not present if message is sent by SS. |
||
|
NOTE: Bits 7 and 8 are not checked, as these bits are reserved for the send sequence number in messages sent from the UE. |
|||
Contents of FACILITY with Return Result component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Protocol discriminator |
1011 B (non call related SS messages) or 0011 B (call control; call related SS messages) |
||
|
Transaction identifier |
See the specific test case |
||
|
Message Type |
0011 1010 B, if the message is sent by the SS |
||
|
Facility IE |
|||
|
– Length of Facility IE contents |
5 |
||
|
– Component type tag |
1010 0010 B (return result) |
||
|
– Component length |
3 |
||
|
– Invoke ID tag |
0000 0010 B (invoke ID) |
||
|
– Invoke ID length |
1 |
||
|
– Invoke ID |
The same value that has been used in the corresponding Invoke component. |
||
|
– Sequence tag |
Not present |
||
|
– Sequence length |
Not present |
||
|
– Operation Code tag |
Not present (omitted if the Return Result component does not include any parameters) |
||
|
– Operation Code length |
Not present |
||
|
– Operation Code |
Not present |
||
|
– Parameters |
Not present |
||
|
SS Version Indicator |
Not checked, IE not present if message is sent by SS. |
||
|
NOTE: Bits 7 and 8 are not checked, as these bits are reserved for the send sequence number in messages sent from the UE. |
|||
Contents of RELEASE COMPLETE message with Return error component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Cause |
Test case specific |
||
|
location |
Test case specific |
||
|
Cause value |
Test case specific |
||
|
Facility |
|||
|
Component type tag |
‘10100011’ B |
||
|
Component length |
calculated |
||
|
Invoke ID |
Same as the one sent by the UE in the FACILITY message |
||
|
Error Code tag |
‘00000010’ B |
||
|
Error Code length |
calculated |
||
|
Error Code |
Test case specific |
||
|
Parameters |
Test case specific |
||
|
User-user |
Not present |
Contents of RELEASE COMPLETE message with Return result component:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Cause |
Normal event |
||
|
Facility |
|||
|
Component type tag |
‘10100010’ B |
||
|
Component length |
calculated |
||
|
Invoke ID |
Same as the one sent by the UE in the FACILITY message |
||
|
Operation code |
Not present |
||
|
Parameters |
Not present |
9.1.5.2.3 Default contents for GMM messages
Contents of GMM INFORMATION:
|
Information Element |
Condition |
Value/remark |
Version |
|---|---|---|---|
|
Full name for network |
Not present |
||
|
Short name for network |
Not present |
||
|
Local time zone |
Not present |
||
|
Universal time and local time zone |
Not present |
||
|
LSA Identity |
Not present |
||
|
Network Daylight Saving Time |
Not present |
||
|
NOTE: In the test case specific message contents at least one of these IE’s shall be specified as present. |
|||