6.1.0b Default System Information Block Messages

34.1083GPPCommon test environments for User Equipment (UE)Conformance testingRelease 15TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Contents of System Information Block type 1 (supported PLMN type is GSM-MAP)

– CN common GSM-MAP NAS system information	A1
– GSM-MAP NAS system information		00 01H
– CN domain system information
– CN domain identity		PS
– CHOICE CN Type		GSM-MAP
– CN domain specific NAS system information
– GSM-MAP NAS system information		05 00H
– CN domain specific DRX cycle length coefficient		7
– CN domain identity		CS
– CHOICE CN Type		GSM-MAP
– CN domain specific NAS system information
– GSM-MAP NAS system information		1E 01H
– CN domain specific DRX cycle length coefficient		7
– CN common GSM-MAP NAS system information	A2
– GSM-MAP NAS system information		00 80H (see note)
– CN domain system information
– CN domain identity		PS
– CHOICE CN Type		GSM-MAP
– CN domain specific NAS system information
– GSM-MAP NAS system information		00 00H (see note)
– CN domain specific DRX cycle length coefficient		7
– CN domain identity		CS
– CHOICE CN Type		GSM-MAP
– CN domain specific NAS system information
– GSM-MAP NAS system information		1E 01H
– CN domain specific DRX cycle length coefficient		7
– UE Timers and constants in idle mode	A1, A2
-T300		4 000 milliseconds
-N300		3
-T312		10 seconds
– N312		1
– UE Timers and constants in connected mode
– T301		Not Present (2 000 milliseconds: default value)
– N301		Not Present (2: default value)
– T302		Not Present (4 000 milliseconds: default value)
– N302		Not Present (3: default value)
– T304		Not Present (2 000 milliseconds: default value)
– N304		Not Present (2: default value)
– T305		Not Present (30 minutes: default value)
– T307		Not Present (30 seconds: default value)
– T308		Not Present (160 milliseconds: default value)
– T309		Not Present (5 seconds: default value)
– T310		Not Present (160 milliseconds: default value)
– N310		Not Present (4: default value)
– T311		Not Present (2 000 milliseconds: default value)
– T312		Not Present (1 seconds: default value)
– N312		Not Present (1: default value)
– T313		Not Present (3 seconds: default value)
– N313		Not Present (20: default value)
– T314		Not Present (12 seconds: default value)
– T315		Not Present (180 seconds: default value)
– N315		Not Present (1: default value)
– T316		Not Present (30 seconds: default value)
– T317		Not Present (infinity: default value)
NOTE: For Inter-RAT test cases GERAN and UTRAN cells use different LAC and RAC.

Condition	Explanation
A1	UTRAN cell environment
A2	UTRAN/GSM inter-RAT cell environment

Contents of System Information Block type 2

– URA identity list	Only 1 URA identity broadcasted
– URA identity	0000 0000 0000 0001B

Contents of System Information Block type 3 (FDD)

Information Element	Value/remark	Version
– SIB4 indicator	TRUE
– Cell identity	0000 0000 0000 0000 0000 0000 0001B
– Cell selection and re-selection info
– Mapping info	Not Present
– Cell selection and reselection quality measure	CPICH RSCP
– CHOICE mode	FDD
– Sintrasearch	8 (16 dB)
– Sintersearch	8 (16 dB)
– SsearchHCS	Not Present
– RAT List	This parameter is configurable
– RAT identifier	GSM
– Ssearch,RAT	-16 (-32 dB)
– SHCS,RAT	Not Present
– Slimit,SearchRAT	0 (0dB)
– Qqualmin	Reference to table 6.1.1
– Qrxlevmin	Reference to table 6.1.1
– Qhyst1s	1 (2 dB)
– Qhyst2s	Not Present
– Treselections	0 seconds
– HCS Serving cell information	Not Present
– Maximum allowed UL TX power	Reference to table 6.1.1
– Cell Access Restriction
– Cell barred	Not barred
– Intra-frequency cell re-selection indicator	Not present
– Tbarred	Not present
– Cell Reserved for operator use	Not reserved
– Cell Reservation Extension	Not reserved
– Access Class Barred List
– Access Class Barred0	Not barred
– Access Class Barred1	Not barred
– Access Class Barred2	Not barred
– Access Class Barred3	Not barred
– Access Class Barred4	Not barred
– Access Class Barred5	Not barred
– Access Class Barred6	Not barred
– Access Class Barred7	Not barred
– Access Class Barred8	Not barred
– Access Class Barred9	Not barred
– Access Class Barred10	Not barred
– Access Class Barred11	Not barred
– Access Class Barred12	Not barred
– Access Class Barred13	Not barred
– Access Class Barred14	Not barred
– Access Class Barred15	Not barred
– Domain Specific Access Restriction Parameters For PLMN Of MIB	Not present	REL-6
– Domain Specific Access Restriction For Shared Network	Not present	REL-6
– Paging Permission with Access Control Parameters For PLMN Of MIB	Not present	REL-8
– Paging Permission with Access Control For Shared Network	Not present	REL-8
– CSG Identity	Not present	REL-8
– CSG PSC Split Information	Not present	REL-8
– IMS Emergency Support Indicator	Not present	REL-9

Contents of System Information Block type 3 (3.84 Mcps TDD, 1.28 Mcps TDD and 7.68 Mcps TDD)

Information Element	Value/remark	Version
– SIB4 Indicator	TRUE
– Cell identity	0000 0000 0000 0000 0000 0000 0001B
– Cell selection and re-selection info
– Mapping info	Not present
– Cell selection and reselection quality measure	(no data)
– CHOICE mode	TDD
– Sintrasearch	10 (21 dB)
– Sintersearch	10 (21 dB)
– SsearchHCS	Not present
– RAT List	This parameter is configurable
– RAT identifier	GSM
– Ssearch,RAT	-32 (-63 dB)
– SHCS,RAT	Not present
– Slimit,ShearchRAT	-1 (-1 dB)
– Qrxlevmin	Reference to table 6.1.6a
– Qhyst1s	0 (0 dB)
– Treselections	0 seconds
– HCS Serving cell information	Not present
– Maximum allowed UL TX power	Reference to table 6.1.6a
– Cell Access Restriction
– Cell barred	Not barred
– Intra-frequency cell re-selection indicator	Not present
– Tbarred	Not present
– Cell Reserved for operator use	Not reserved
– Cell Reservation Extension	Not reserved
– Access Class Barred List
– Access Class Barred0	Not barred
– Access Class Barred1	Not barred
– Access Class Barred2	Not barred
– Access Class Barred3	Not barred
– Access Class Barred4	Not barred
– Access Class Barred5	Not barred
– Access Class Barred6	Not barred
– Access Class Barred7	Not barred
– Access Class Barred8	Not barred
– Access Class Barred9	Not barred
– Access Class Barred10	Not barred
– Access Class Barred11	Not barred
– Access Class Barred12	Not barred
– Access Class Barred13	Not barred
– Access Class Barred14	Not barred
– Access Class Barred15	Not barred
– Domain Specific Access Restriction Parameters For PLMN Of MIB	Not present	REL-6
– Domain Specific Access Restriction For Shared Network	Not present	REL-6
– Paging Permission with Access Control Parameters For PLMN Of MIB	Not present	REL-8
– Paging Permission with Access Control For Shared Network	Not present	REL-8
– CSG Identity	Not present	REL-8
– CSG PSC Split Information	Not present	REL-8

Contents of System Information Block type 4 in connected mode (FDD)

– Cell identity	0000 0000 0000 0000 0000 0000 0001B
– Cell selection and re-selection info
– Mapping Info	Not present
– Cell selection and reselection quality measure	CPICH RSCP
– CHOICE mode	FDD
– Sintrasearch	8 (16 dB)
– Sintersearch	8 (16 dB)
– SsearchHCS	Not present
– RAT List	This parameter is configurable
– RAT identifier	GSM
– Ssearch,RAT	-16 (-32 dB)
– SHCS,RAT	Not Present
– Slimit,SearchRAT	0 (0dB)
– Qqualmin	Reference to table 6.1.1
– Qrxlevmin	Reference to table 6.1.1
– Qhyst1s	1 (2 dB)
– Qhyst2s	Not Present
– Treselections	0 seconds
– HCS Serving cell information	Not Present
– Maximum allowed UL TX power	Reference to table 6.1.1
– Cell Access Restriction
– Cell barred	Not barred
– Intra-frequency cell re-selection indicator	Not present
– Tbarred	Not present
– Cell Reserved for operator use	Not reserved
– Cell Reservation Extension	Not reserved
– Access Class Barred List	Not present

Contents of System Information Block type 4 in connected mode (similar to SIB type3) (3.84 Mcps TDD, 1.28 Mcps TDD and 7.68 Mcps TDD)

– Cell identity	0000 0000 0000 0000 0000 0000 0001B
– Cell selection and re-selection info
– Mapping info	Not Present
– Cell selection and reselection quality measure	CPICH RSCP
– CHOICE mode	TDD
– Sintrasearch	10 (21 dB)
– Sintersearch	10 (21 dB)
– SsearchHCS	Not present
– RAT List	This parameter is configurable
– RAT identifier	GSM
– Ssearch,RAT	-32 (-63 dB)
– SHCS,RAT	Not present
– Slimit,ShearchRAT	-1 (-1 dB)
– Qrxlevmin	Reference to table 6.1.6a
– Qhyst1s	0 dB
– Treselections	0 seconds
– HCS Serving cell information	Not present
– Maximum allowed UL TX power	Reference to table 6.1.6a
– Cell Access Restriction
– Cell barred	Not barred
– Intra-frequency cell re-selection indicator	Not present
– Tbarred	Not present
– Cell Reserved for operator use	Not reserved
– Cell Reservation Extension	Not reserved
– Access Class Barred List	Not present

Contents of System Information Block type 5 (FDD)

Information Element	Conditions	Value/remark	Version
– SIB6 indicator		TRUE
– SIB22 indicator		FALSE	REL-11
– PICH Power offset		-5 dB
– CHOICE Mode		FDD
– AICH Power offset		-5 dB
– Primary CCPCH info		Not present
– PRACH system information list
– PRACH system information
– PRACH info
– CHOICE mode		FDD
– Available Signature		‘0000 0000 1111 1111’B
– Available SF		64
– Preamble scrambling code number		0
– Puncturing Limit		1.00
– Available Sub Channel number		‘1111 1111 1111’B
– Transport channel Identity		15
– RACH TFS
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC size		168
– Number of TB and TTI List
– Number of Transport blocks		1
– CHOICE Mode		FDD
– CHOICE Logical channel List		Configured
– RLC size		360
– Number of TB and TTI List
– Number of Transport blocks		1
– CHOICE Mode		FDD
– CHOICE Logical channel List		Configured
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		Convolutional
– Coding Rate		1/2
– Rate matching attribute		150
– CRC size		16
– Additional RACH TFS for CCCH			Rel6
– RLC size		240
– Number of Transport blocks		1
– RACH TFCS
– CHOICE TFCI signalling		Normal
– TFCI Field 1 information
– CHOICE TFCS representation		Complete reconfiguration
– TFCS complete reconfiguration information
– CHOICE CTFC Size		2 bit
– CTFC information		0
– Power offset information
– CHOICE Gain Factors		Computed Gain Factor
– Reference TFC ID		0
– CHOICE Mode		FDD
– Power offset Pp-m		0 dB
– CTFC information		1
– Power offset information
– CHOICE Gain Factors		Signalled Gain Factor
– CHOICE mode		FDD
– Gain factor ßc		11
– Gain factor ßd		15
– Reference TFC ID		0
– CHOICE Mode		FDD
– Power offset Pp-m		0 dB
– Additional RACH TFCS for CCCH			Rel-6
– Power offset information
– CHOICE Gain Factors		Signalled Gain Factor
– CHOICE mode		FDD
– Gain factor ßc		11
– Gain factor ßd		15
– Reference TFC ID		0
– CHOICE Mode		FDD
– Power offset Pp-m		0 dB
– PRACH partitioning
– Access Service Class
– ASC Setting		Not Present
– ASC Setting
– CHOICE mode		FDD
– Available signature Start Index		0 (ASC#1)
– Available signature End Index		7 (ASC#1)
– Assigned Sub-Channel Number		‘1111’B The first/ leftmost bit of the bit string contains the most significant bit of the Assigned Sub-Channel Number.
– ASC Setting		Not Present
– ASC Setting
– CHOICE mode		FDD
– Available signature Start Index		0 (ASC#3)
– Available signature End Index		7 (ASC#3)
– Assigned Sub-Channel Number		‘1111’B The first/ leftmost bit of the bit string contains the most significant bit of the Assigned Sub-Channel Number.
– ASC Setting		Not Present
– ASC Setting
– CHOICE mode		FDD
– Available signature Start Index		0 (ASC#5)
– Available signature End Index		7 (ASC#5)
– Assigned Sub-Channel Number		‘1111’B The first/ leftmost bit of the bit string contains the most significant bit of the Assigned Sub-Channel Number.
– ASC Setting		Not Present
– ASC Setting
– CHOICE mode		FDD
– Available signature Start Index		0 (ASC#7)
– Available signature End Index		7 (ASC#7)
– Assigned Sub-Channel Number		‘1111’B The first/ leftmost bit of the bit string contains the most significant bit of the Assigned Sub-Channel Number.
– Persistence scaling factor
– Persistence scaling factor		0.9 (for ASC#2)
– Persistence scaling factor		0.9 (for ASC#3)
– Persistence scaling factor		0.9 (for ASC#4)
– Persistence scaling factor		0.9 (for ASC#5)
– Persistence scaling factor		0.9 (for ASC#6)
– Persistence scaling factor		0.9 (for ASC#7)
– AC-to-ASC mapping table
– AC-to-ASC mapping		6 (AC0-9)
– AC-to-ASC mapping		5 (AC10)
– AC-to-ASC mapping		4 (AC11)
– AC-to-ASC mapping		3 (AC12)
– AC-to-ASC mapping		2 (AC13)
– AC-to-ASC mapping		1 (AC14)
– AC-to-ASC mapping		0 (AC15)
– CHOICE mode		FDD
– Primary CPICH TX power		31
– Constant value		-10
– PRACH power offset
– Power Ramp Step		3dB
– Preamble Retrans Max		4
– RACH transmission parameters
– Mmax		2
– NB01min		3 slot
– NB01max		10 slot
– AICH info
– Channelisation code		3
– STTD indicator		FALSE
– AICH transmission timing		0
– Secondary CCPCH system information
– Secondary CCPCH info
– CHOICE mode		FDD
– Secondary scrambling code		Not Present
– STTD indicator		FALSE
– Spreading factor		64
– Code number		1
– Pilot symbol existence		FALSE
– TFCI existence		TRUE (default value)
– Fixed or Flexible position		Flexible (default value)
– Timing offset		Not Present Absence of this IE is equivalent to default value 0
– TFCS		(This IE is repeated for TFC number for PCH and FACH.)
– CHOICE TFCI signalling		Normal
– TFCI Field 1 information
– CHOICE TFCS representation		Complete reconfiguration
– TFCS complete reconfiguration information
– CHOICE CTFC Size	M2	6 bit
– CHOICE CTFC Size	A1,A2,A3,M1	4 bit
– CTFC information		0
– Power offset information		Not Present
– CTFC information		1
– Power offset information		Not Present
– CTFC information		2
– Power offset information		Not Present
– CTFC information		3
– Power offset information		Not Present
– CTFC information		4
– Power offset information		Not Present
– CTFC information	A1,A2,A3,M1	5
– Power offset information		Not Present
– CTFC information		6
– Power offset information		Not Present
– CTFC information		8
– Power offset information		Not Present
– CTFC information	M2	12
– Power offset information	M2	Not Present
– CTFC information	M2	13
– Power offset information	M2	Not Present
– CTFC information	M2	14
– Power offset information	M2	Not Present
– CTFC information	M2	15
– Power offset information	M2	Not Present
– CTFC information	M2	16
– Power offset information	M2	Not Present
– CTFC information	M2	18
– Power offset information	M2	Not Present
– FACH/PCH information
– TFS		(PCH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		240
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		10 ms
– Type of channel coding		Convolutional
– Coding Rate		1/2
– Rate matching attribute		230
– CRC size		16 bit
– Transport channel Identity		12 (for PCH)
– CTCH indicator		FALSE
– TFS		(FACH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		168
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– Number of Transport blocks		2
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		10 ms
– Type of channel coding		Convolutional
– Coding Rate		1/2
– Rate matching attribute		220
– CRC size		16 bit
– Transport channel Identity		13 (for FACH)
– CTCH indicator		FALSE
– TFS		(FACH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		360
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		10 ms
– Type of channel coding		Turbo
– Rate matching attribute		130
– CRC size		16bit
– Transport channel Identity		14 (for FACH)
– TFS	M2	(FACH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		160
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		Convolutional
– Coding Rate		1/3
– Rate matching attribute		225
– CRC size		16bit
– Transport channel Identity		16 (for FACH)
– CTCH indicator		FALSE
– PICH info
– CHOICE mode		FDD
– Channelisation code		2
– Number of PI per frame		18
– STTD indicator		FALSE
– MCCH configuration information	M1	Not Present	Rel-6
– MCCH configuration information	M2		Rel-6
– Access Info Period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– Repetition Period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– Modification period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– RLC info
– DL UM RLC LI size		7
– DL Duplication Avoidance and Reordering info		Not Present
– DL Out of sequence delivery info
– Timer_OSD		Not Present
– Window size OSD		48
– TCTF presence		Not Present
– CBS DRX Level 1 information		Not Present
– Frequency Band Indicator	A1	Not Present
– Frequency Band Indicator 2		Not Present
– Frequency Band Indicator 3		Not Present
– Frequency Band Indicator	A2	FDD Band under test
– Frequency Band Indicator 2		Not Present
– Frequency Band Indicator 3		Not Present
– Frequency Band Indicator	A3	Extension indicator
– Frequency Band Indicator 2		FDD Band under test
– Frequency Band Indicator 3		Not Present
– Frequency Band Indicator	A4	Extension indicator
– Frequency Band Indicator 2		Extension indicator
– Frequency Band Indicator 3		FDD Band under test
– Secondary CCPCH system information MBMS	M2	Not Present	Rel-6
– Secondary CCPCH system information MBMS	M1		Rel-6
– Secondary CCPCH info MBMS
– CHOICE Mode		FDD
– Secondary scrambling code		Not Present
– STTD indicator		FALSE
– Spreading factor		Reference to clause 5.5.1.4 “Downlink physical channels code allocation for MBMS test cases”
– Code number		Reference to clause 5.5.1.4 “Downlink physical channels code allocation for MBMS test cases”
– Timing Offset		Set to (Cell No, – 21) * 9 for MBMS Cell Nos 21-28. (actual value = IE value * 256 chips)
– TFCS
– CHOICE TFCI signalling		Normal
– TFCI Field 1 information
– CHOICE TFCS representation		Complete reconfiguration
– TFCS complete reconfiguration information
– CHOICE CTFC Size		2 bit
– CTFC information		0
– Power offset information		Not Present
– CTFC information		1
– Power offset information		Not Present
– FACH carrying MCCH
– TFS
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		160
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		Convolutional
– Coding Rate		1/3
– Rate matching attribute		160
– CRC size		16bit
– MCCH configuration information
– Access Info Period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– Repetition Period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– Modification period coefficient		Reference to clause 11.1.1 “MCCH configuration parameters”
– RLC info MBMS
– DL UM RLC LI size		7
– DL Duplication Avoidance and Reordering info		Not Present
– DL Out of sequence delivery info
– Timer_OSD		Not Present
– Window size OSD		48
– TCTF presence		FALSE
– FACH carrying MTCH list		Not Present
– FACH carrying MSCH		Not Present
– CHOICE Mode	B1, B3	FDD	Rel-7
– HS-DSCH common system information			Rel-7
– CCCH mapping info
– Logical channel identity		5
– MAC-ehs queue identity		0
– SRB1 mapping info		Not Present
– Common MAC-ehs reordering queue list
– MAC-ehs queue to configure list		Configure 1 queue
– MAC-ehs queue Id		0
– T1		50ms
– Treset		Not Present
– MAC-ehs window size		16
– HS-SCCH system info
– DL Scrambling Code		Not Present
– HS-SCCH Channelisation Code Information		Use 1 HS-SCCH
– HS-SCCH Channelisation Code		7
– HARQ system Info
– Number of Processes		Reference to clause 6.10.2.4.5 Parameter Set
– CHOICE Memory Partitioning		Implicit
– Common H-RNTI Information		Use 4
– Common H-RNTI		‘1111 1010 1010 1010’
– Common H-RNTI		‘1111 1010 1010 1011’
– Common H-RNTI		‘1111 1010 1010 1100’
– Common H-RNTI		‘1111 1010 1010 1110’
– BCCH specific H-RNTI		‘1111 1010 1110 1010’
– HS-DSCH paging system information			Rel-7
– DL Scrambling Code		Not Present
– PICH for HSDPA supported paging list		Use value 1
– HSDPA associated PICH info
– CHOICE mode		FDD
– Channelisation code		13
– Number of PI per frame		18
– STTD Indicator		False
– HS-PDSCH Channelisation Code		1
– Number of PCCH transmissions		3
– Transport Block Size List		1
– Transport Block Size Index		1
Common EDCH System Info	B2, B3		Rel-8
– Ul Interference for common EDCH		Not Present
– common E-DCH MAC-d flow list		MAC-d flows
– mac-d flow identity		0
– mac-d flow power offset		2
– mac-d flow max number of retransmissions		7
– mac-d flow multiplexing list		Not Present
– E-DCH-Mac-d flow retransmission timer		Not Present
– mac-d flow iIdentity		1
– mac-d flow power offset		0
– mac-d flow max number of retransmissisons		7
– mac-d flow multiplexing list		Not Present
– E-DCH-Mac-d flow retransmission timer		Not Present
– mac-d flow identity		7 (used for CCCH)
– mac-d flow power offset		0
– mac-d flow max number of retransmissions		7
– mac-d flow multiplexing list		Not Present
– E-DCH-Mac-d flow retransmission timer		Not Present
-CHOICE Mode		FDD
– Prach preamble for enhanced uplink
– Available Signatures		‘0000 0111 0000 0000’B
– e-ai-Indication		TRUE
– Preamble scrambling code word number		0
– Available Sub Channel Number		‘1111 1111 1111’B
– Prach partitioning		Refer to Rel-99 ( to Rel-6 ) default values in the same message above
– Persistence scaling factor list		Refer to Rel-99 (to Rel-6) default values in the same message above
– AC-to-ASC-mapping		Refer to Rel-99 (to Rel-6) default values in the same message above
– Primary CPICH TX power		31
– Constant value		-10
– Prach power offset		Use Default
– Rach transmission parameters		Use Default
– AICH info		Use Default
– Power offset Pp-e		0
– Initial serving grant value		4
– E-DCH TTI		set to 2ms if supported by the UE E-DCH category, or 10ms if the UE E-DCH category does not support 2ms TTI
– E-AGCH Info
– E-AGCH Channelisation Code		10
– HARQ Infofor E-DCH		rvtable
– UL DPCH power control info
– Power Control Algorithm		algorithm 1
– TPC step size		0 (1dB)
– ACK		3
– NACK		3
– Ack Nack repetition factor		1
– E-DPCCH Info
– E-DPCCH/DPCCH power offset		0
– Happy bit delay condition		100ms
– E-TFC Boost Info		Not Present
– E-DPDCH Power Interpolation		Not Present
– E-DPDCH Info
– E-TFCI table index		0
– E-DCH minimum set E-TFCI		9
– Reference-E-TFCIs		2 E-TFCIs
– Reference E-TFCI		11
– Reference E-TFCI PO		4
– Reference E-TFCI		83
– Reference E-TFCI PO		16
– Min reduced-E-DPDCH gain factor		Not Present
– Max channelization codes		2sf4 (for E-DCH Category 2 and 4) 2sf2and2sf4
– PL_non-max		0.84
– Scheduling Info Configuration
– Periodicity for Sched Info – No Grant		Use Default
– Periodicity for Sched Info – Grant		Use Default
– Power Offset for Sched Info		0
– 3-Index-Step Threshold		Use Default
– 2-Index-Step Threshold		Use Default
– F-DPCH TPC command error rate target		4 (corresponds to 0.04 in target F-DPCH TPC command error rate)
– Additional E-DCH transmission back off		8 TTI
– Maximum E-DCH resource allocation for CCCH		16 TTI
-Maximum period for collision resolution phase		15 TTI
– E-DCH transmission continuation back off		24 TTI
– ACK/NACK support on HS-DPCCH		TRUE
– Measurement Feedback Info
-CHOICE mode		FDD
– Measurement Power Offset		6dB
– CQI Feedback cycle, k		4ms
– CQI repetition factor		1
– _CQI		5 (corresponds to 0dB in relative power offset)
– Common E-DCH Resource Configuration Information List		3 E-DCH resources
– S-offset		0
– F-DPCH Code number		12
– E-RGCH Information
– Signature Sequence		0
– E-HICH Info
– Channelisation Code		4
– Signature Sequence		1
– Uplink DPCH Code Info
– ul-DPCCHscramblingCodeType		Long
– ul-DPCCHscramblingCode		10
– Soffset		1
– F-DPCH Code number		12
– E-RGCH Information
– Signature Sequence		2
– E-HICH Info
– Channelisation Code		4
– SignatureSequence		3
– Uplink DPCH Code Info
– ul-DPCCHscramblingCodeType		Long
– ul-DPCCHscramblingCode		1
– Soffset		2
– F-DPCH Code number		12
– E-RGCH Information
– Signature Sequence		4
– E-HICH Info
– Channelisation Code		4
– SignatureSequence		5
– Uplink DPCH Code Info
– ul-DPCCHscramblingCodeType		Long
– ul-DPCCHscramblingCode		2

Condition	Explanation
A1	Band I, Band II, Band III
A2	Band V, Band VI, Band VII
A3	Band VIII & bands from Band X to Band XXII
A4	Bands beyond Band XXII
B1	Only for cells which configure HS-DSCH reception in CELL_FACH
B2	Only for cells which configure common E-DCH reception in CELL_FACH
B3	Only for cells which configure common E-DCH and HS-DSCH reception in CELL_FACH
M1	Only for MBMS cells with MCCH mapped on an S-CCPCH used for MBMS purposes only
M2	Only for MBMS cells with MCCH mapped on an S-CCPCH also used for non- MBMS purposes

NOTE: for non-MBMS cell MBMS specific IEs should be set to not present.

Contents of System Information Block type 5 (3.84 Mcps TDD)

– SIB6 indicator	TRUE
– PICH Power offset	-5 dB
– CHOICE Mode	TDD
– PUSCH system information	Not Present
– PDSCH system information	Not Present
– TDD open loop power control
– Primary CCPCH Tx Power	30 dbm
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Alpha	(1/8)
– PRACH Constant Value	-10
– DPCH Constant Value	-10
– PUSCH Constant Value	-10
– UE positioning related parameters	Not Present /REL-4/
– Primary CCPCH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– CHOICE SyncCase	Sync Case 2
– Timeslot	0
– Cell parameters ID	Not Present
– SCTD indicator	FALSE
– PRACH system information list
– PRACH system information
– PRACH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Timeslot number	14
– PRACH Channelisation Code List
– CHOICE SF	SF8
– Channelisation Code List
– Channelisation Code	8/1
– Channelisation Code	8/2
– Channelisation Code	8/3
– Channelisation Code	8/4
– PRACH Midamble	Direct
– PNBSCH allocation	Not Present /REL-4/
– Transport channel Identity	15
– RACH TFS
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Not Present
– CHOICE Logical channel List	Configured
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– RACH TFCS	Not present
– PRACH partitioning
– Access Service Class
– ASC Settings	(ASC#0)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#1)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#2)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#3)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#4)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#5)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#6)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– Persistence scaling factors
– Access Service Class
– Persistence scaling factor	0.9 (for ASC#2)
– Persistence scaling factor	0.9 (for ASC#3)
– Persistence scaling factor	0.9 (for ASC#4)
– Persistence scaling factor	0.9 (for ASC#5)
– Persistence scaling factor	0.9 (for ASC#6)
– AC-to-ASC mapping
– AC-to-ASC mapping table
– AC-to-ASC mapping	6 (AC0-9)
– AC-to-ASC mapping	5 (AC10)
– AC-to-ASC mapping	4 (AC11)
– AC-to-ASC mapping	3 (AC12)
– AC-to-ASC mapping	2 (AC13)
– AC-to-ASC mapping	1 (AC14)
– AC-to-ASC mapping	0 (AC15)
– CHOICE mode	TDD (no data)
– Secondary CCPCH system information
– Secondary CCPCH system information
– Secondary CCPCH info
– CHOICE mode	TDD
– Offset	0
– Common timeslot info
– 2nd interleaving mode	Frame
– TFCI coding	Reference clause 6.10 "Parameter Set"
– Puncturing limit	Reference clause 6.10 "Parameter Set"
– Repetition period	Not Present (MD "1")
– Repetition length	Not present (empty)
– Individual timeslot info
– CHOICE TDD option	3.84 Mcps TDD
– Timeslot number	1
– TFCI existence	Reference clause 6.10 "Parameter Set"
– Midamble Shift and burst type
– CHOICE TDD option	3.84 Mcps TDD
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	4
– Midamble Shift	Not Present
– CHOICE TDD option	3.84 Mcps TDD
– no data
– Code List
– Channelisation Code	(This IE is repeated for Code number for PCH and FACH)
– TFCS	(This IE is repeated for TFC number for PCH and FACH)
-CHOICE TFCI signalling
– Normal
– TFCI Field 1 information
– CHOICE TFCS representation	Complete reconfiguration
– TFCS complete information
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.
– CTFC information	Reference clause 6.10 "Parameter Set"
– Power offset information	Not Present
– FACH/PCH information
– TFS	(PCH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	12 (for PCH)
– CTCH indicator	FALSE
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	13 (for FACH)
– CTCH indicator	FALSE
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	14 (for FACH)
– CTCH indicator	FALSE
– PICH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Timeslot number	0
– Midamble shift and burst type
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	8
– Midamble Shift	Not Present
– Channelisation code	16/16
– Repetition period/length	64/2
– Offset	0
– Paging indicator length	4
– NGAP	4
– NPCH	2
– CBS DRX Level 1 information	Not Present

Contents of System Information Block type 5 (1.28 Mcps TDD)

Information Element	Conditions	Value/remark	Version
– SIB6 indicator		TRUE
– PICH Power offset		-5 dB
– CHOICE Mode		TDD
– PUSCH system information		Not Present
– PDSCH system information		Not Present
– TDD open loop power control
– Primary CCPCH Tx Power		30 dbm
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– no data
– Primary CCPCH info
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– TSTD indicator		FALSE
– Cell parameters ID		Set to the parameters id of the cell
– SCTD indicator		FALSE
– PRACH system information list
– PRACH system information
– PRACH info
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– SYNC_UL info
– SYNC_UL codes bitmap		"11111111"
– SYNC_UL codes bitmap	B1	"11110000"
– PRX_UpPCHdes		15(-105dBm)
– Power Ramping Step		3 dB
– Max SYNC_UL Transmissions		8
– Mmax		2
– PRACH definition
– Timeslot number
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– Timeslot number		1
– PRACH Channelisation Code
– Channelisation Code List
– Channelisation Code		(8/8)
– Midamble Shift and burst type
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– Midamble Allocation Mode		Default midamble
– Midamble configuration		8 (k=16)
– Midamble Shift		Not present
– FPACH info
– Timeslot number		0
– Channelisation code		(16/15)
– Midamble Shift and burst type
– CHOICE TDD option		1.28 Mcps TDD /REL-4/
– Midamble Allocation Mode		Default midamble
– Midamble configuration		4 (k=8)
– Midamble Shift		Not present
– WT		4
– Transport channel Identity		15
– RACH TFS
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC size		170
– Number of TB and TTI List
– Number of Transport blocks		1
– CHOICE Mode		TDD
– CHOICE Logical channel List		Configured
– Semi-static Transport Format information
– Transmission time interval		10 ms
– Type of channel coding		Convolutional
– Coding Rate		1/2
– Rate matching attribute		110t"
– CRC size		16
– RACH TFCS		Not present
– PRACH partitioning
– Access Service Class
– ASC Settings		(ASC#0)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#1)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#2)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#3)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#4)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#5)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– ASC Settings		(ASC#6)
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Available SYNC_UL codes indices		"11111111"
– CHOICE subchannel size		Size1
– Available Subchannels		Null
– Access Service Class
– Persistence scaling factor		0.9 (for ASC#2)
– Persistence scaling factor		0.9 (for ASC#3)
– Persistence scaling factor		0.9 (for ASC#4)
– Persistence scaling factor		0.9 (for ASC#5)
– Persistence scaling factor		0.9 (for ASC#6)
– AC-to-ASC mapping
– AC-to-ASC mapping table
– AC-to-ASC mapping		6 (AC0-9)
– AC-to-ASC mapping		5 (AC10)
– AC-to-ASC mapping		4 (AC11)
– AC-to-ASC mapping		3 (AC12)
– AC-to-ASC mapping		2 (AC13)
– AC-to-ASC mapping		1 (AC14)
– AC-to-ASC mapping		0 (AC15)
– CHOICE mode		TDD (no data)
– Secondary CCPCH system information
– Secondary CCPCH info
– CHOICE mode		TDD
– Offset		0
– Common timeslot info
– 2nd interleaving mode		Frame
– TFCI coding		16 bits
– Puncturing limit		Reference clause 6.11 "Parameter Set"
– Repetition period		1
– Repetition length		0
– Individual timeslot info
– CHOICE TDD option		1.28 Mcps TDD
– Timeslot number		0
– TFCI existence		Reference clause 6.11 "Parameter Set"
– Midamble Shift and burst type
– CHOICE TDD option		1.28 Mcps TDD
– Midamble Allocation Mode		Default midamble
– Midamble configuration		4 (k=8)
– Midamble Shift		Not Present
– CHOICE TDD option		1.28 Mcps TDD
– Modulation		QPSK
– SS-TPC Symbols		0
– Code List
– Channelisation Code		(16/7)
– Channelisation Code		(16/8)
– Channelisation Code	B2	(16/9)
– Channelisation Code	B2	(16/10)
– Channelisation Code	B2	(16/11)
– TFCS
– CHOICE TFCI signalling		Normal
– TFCI Field 1 information
– CHOICE TFCS representation		Complete
– TFCS addition information
– CHOICE CTFC Size		4 bit
– CHOICE CTFC Size	B2	6 bit
– CTFC information		0
– Power offset information		Not Present
– CTFC information		1
– Power offset information		Not Present
– CTFC information		2
– Power offset information		Not Present
– CTFC information		3
– Power offset information		Not Present
– CTFC information		4
– Power offset information		Not Present
– CTFC information		5
– Power offset information		Not Present
– CTFC information	B2	6
– Power offset information	B2	Not Present
– CTFC information	B2	7
– Power offset information	B2	Not Present
– CTFC information	B2	8
– Power offset information	B2	Not Present
– CTFC information	B2	9
– Power offset information	B2	Not Present
– CTFC information	B2	10
– Power offset information	B2	Not Present
– CTFC information	B2	11
– Power offset information	B2	Not Present
– CTFC information	B2	12
– Power offset information	B2	Not Present
– CTFC information	B2	13
– Power offset information	B2	Not Present
– CTFC information	B2	14
– Power offset information	B2	Not Present
– CTFC information	B2	15
– Power offset information	B2	Not Present
– CTFC information	B2	16
– Power offset information	B2	Not Present
– CTFC information	B2	17
– Power offset information	B2	Not Present
– FACH/PCH information
– Transport channel Identity		12 (for PCH)
– TFS		(PCH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		240
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– CHOICE Mode		TDD
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		convolutional
– Coding Rate		1/2
– Rate matching attribute		230
– CRC size		16 bit
– Transport channel Identity		13 (for FACH)
– TFS		(FACH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		171
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– Number of Transport blocks		2
– CHOICE Mode		TDD
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		convolutional
– Coding Rate		1/2
– Rate matching attribute		230
– CRC size		16 bit
– CTCH indicator		FALSE
– Transport channel Identity	B2	14 (for FACH)
– TFS		(FACH)
– CHOICE Transport channel type		Common transport channels
– Dynamic Transport format information
– RLC Size		363
– Number of TB and TTI List
– Number of Transport blocks		0
– Number of Transport blocks		1
– Number of Transport blocks		2
– CHOICE Mode		TDD
– CHOICE Logical channel List		ALL
– Semi-static Transport Format information
– Transmission time interval		20 ms
– Type of channel coding		Turbo
– Coding Rate		1/3
– Rate matching attribute		130
– CRC size		16 bit
– CTCH indicator		FALSE
– PICH info
– CHOICE mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– Timeslot number		0
– Midamble shift and burst type
– Midamble Allocation Mode		Default midamble
– Midamble configuration		4 (k=8)
– Midamble Shift		Not Present
– Channelisation code list
– Channelisation code		(16/5)
– Channelisation code		(16/6)
– Repetition period/length		64/2
– Offset		0
– Paging indicator length		4
– NGAP		4
– NPCH		2
– CBS DRX Level 1 information		Not Present
– CHOICE Mode	B1	TDD	Rel-8
– HS-DSCH common system information			Rel-8
– CCCH mapping info
– Logical channel identity		5
– MAC-ehs queue identity		0
– SRB1 mapping info		Not Present
– Common MAC-ehs reordering queue list
– MAC-ehs queue to configure list		Configure 2 queues
– MAC-ehs queue Id		0
– T1		50ms
– Treset		Not Present
– MAC-ehs window size		16
– MAC-ehs queue Id		1
– T1		50ms
– Treset		Not Present
– MAC-ehs window size		16
– HS-SCCH system info
– HS-SCCH Set Configuration		1
– Timeslot number		0
– First Channelisation code		16/11
– Second Channelisation code		16/12
– Midamble Allocation mode		Default midamble
– Midamble configuration		16
– HS-SICH configuration
– Timeslot number		1
– Channelisation code		16/13
– Midamble Allocation mode		Default midamble
– Midamble configuration		16
– PRX_HS-SICH		-120
– Ack-Nack Power Offset		0
– TPC step size		1
– BLER target		-2.0
– Power Control GAP		Not Present
– Pathloss compensation switch		Not Present
– HARQ system Info
– Number of Processes		Reference to clause 6.11.5.4.6 Parameter Set
– CHOICE Memory Partitioning		Implicit
– HS-PDSCH Midamble Configuration
– Midamble Allocation Mode		Default midamble
– Midamble Configuration		16
– Common H-RNTI Information		Use 4
– Common H-RNTI		‘1111 1010 1010 1010’
– Common H-RNTI		‘1111 1010 1010 1011’
– Common H-RNTI		‘1111 1010 1010 1100’
– Common H-RNTI		‘1111 1010 1010 1110’
– BCCH specific H-RNTI		‘1111 1010 1110 1010’
– HS-DSCH paging system information			Rel-8
– PICH for HS-DSCH list		Use value 1
– CHOICE Configuration Mode		Explicit
– HSDPA associated PICH info		TDD
– Timeslot number		0
– Midamble shift and burst type
– CHOICE TDD option		1.28 Mcps TDD
– Midamble Allocation Mode		Default midamble
– Midamble Configuration		16
– CHOICE TDD option		1.28 Mcps TDD
– Codes list		1
– Channelisation code		16/5
– Repetition period/length		Not Present
– Offset		0
– Paging indicator length		Not Present
– N_GAP		Not Present
– N_PCH		Not Present
– DTCH/DCCH Reception window size		4
– PCCH related information		3
– Paging associated HS-PDSCH info		1
– HS-PDSCH Midamble Configuration		1
– Midamble Allocation Mode		Default midamble
– Midamble Configuration		16
– Timeslot Resource Related Information		‘000100’
– Code Resource Information
– Start code		16/16
– Stop code		16/16
– Paging Sub-Channel Size		1
– Transport Block Size List		1
– Transport Block Size Index		1
CommonEDCHSystemInfo	B1		Rel-8
-ul-InterferenceForCommonEDCH		Not Present
-common-E-DCH-MAC-d-FlowList
– mac-d-FlowIdentity		1
– mac-d-FlowPowerOffset		0
– mac-d-FlowMaxRetrans		7
– mac-d-FlowMultiplexingList		Not Present
– e-dch-mac-d-flow-retransmission-timer		10ms
-CHOICE Mode		TDD
– CHOICE TDD option		1.28 Mcps TDD
– prach-PreambleForEnhancedUplink
– E-RUCCH Info
– T-RUCCH		ms200
– N-RUCCH		3
– T-WAIT		ms320
– T-SI		ms20
– Extended Estimation Window		3
– E-RUCCH Access Service class		Not Present
– E-RUCCH persistence scaling factor list		Not Present
– SYNC_UL info
– SYNC_UL codes bitmap		"00001111"
– PRACH Information		Not Present
– E-PUCH info
– E-TFCS information
– Reference Beta Information QPSK list
– Reference Code Rate		2
– Reference Beta		-10
– Reference Code Rate		8
– Reference Beta		-3
– Reference Beta Information 16QAM list
– Reference Code Rate		2
– Reference Beta		-5
– Reference Code Rate		8
– Reference Beta		2
– SNPL Reporting Type		type1
– PRXdes_base		-112
– Beacon PL Est.		Not Present
– TPC step size		1
– Pebase power control gap		Not Present
– Uplink synchronisation parameters		Not Present
– E-PUCH TS configuration list
– TS number		1
– Midamble shift and burst type
– Midamble Allocation Mode		Default midamble
– Midamble configuration		16
– Minimum allowed code rate		0
– Maximum allowed code rate		63
– Maximum number of retransmissions for Scheduling Info		3
– Retransmission Timer for Scheduling Info		40
– Power Offset for Scheduling Info		0
– E-HICH info
– N_E-HICH		6
– E-HICH set configuration
– EI		0
– Timeslot number		6
– Channelisation code		16/6
– Midamble Allocation Mode		Default midamble
– Midamble configuration		16
– E-AGCH Info
– RDI Indicator		TRUE
– TPC step size		1
– E-AGCH set configuration
– Timeslot number		6
– First Channelisation code		16/3
– Second Channelisation code		16/4
– Midamble Allocation Mode		Default midamble
– Midamble configuration		16
– E-AGCH BLER target		-0.05
– HARQ info for E-DCH
– CHOICE mode		TDD
– HARQ RV Configuration		rvtable
– CCCH transmission info
– Common E-RNTI info
– Common E-RNTI information		4
– Starting E-RNTI		‘1111 1010 1010 1010′
– Number of group		1
– Number of E-RNTI per group		1
– Starting E-RNTI		‘1111 1010 1010 1011′
– Number of group		1
– Number of E-RNTI per group		2
– Starting E-RNTI		‘1111 1010 1010 1100′
– Number of group		1
– Number of E-RNTI per group		3
– Starting E-RNTI		‘1111 1010 1010 1110′
– Number of group		1
– Number of E-RNTI per group		4
– HARQ maximum number of retransmissions		2
– HARQ retransmission timer		160
– HARQ power offset		0

B1	Only for cells which configure HS-DSCH and common E-DCH reception in CELL_FACH
B2	For TDD signalling configuration

Contents of System Information Block type 5 (7.68 Mcps TDD)

– SIB6 indicator	TRUE
– PICH Power offset	-5 dB
– CHOICE Mode	TDD
– PUSCH system information	Not Present
– PUSCH system information VHCR	Not Present
– PDSCH system information	Not Present
– TDD open loop power control
– Primary CCPCH Tx Power	30 dbm
– CHOICE TDD option	7.68 Mcps TDD
– Alpha	(1/8)
– PRACH Constant Value	-10
– DPCH Constant Value	-10
– PUSCH Constant Value	-10
– UE positioning related parameters	Not Present
– Primary CCPCH info
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– CHOICE SyncCase	Sync Case 2
– Timeslot	0
– Cell parameters ID	Not Present
– SCTD indicator	FALSE
– PRACH system information list
– PRACH system information
– PRACH info
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Timeslot number	14
– PRACH Channelisation Code List VHCR
– CHOICE SF	SF16
– Channelisation Code List
– Channelisation Code	16/1
– Channelisation Code	16/2
– Channelisation Code	16/3
– Channelisation Code	16/4
– PRACH Midamble	Direct
– PNBSCH allocation	Not Present /REL-4/
– Transport channel Identity	15
– RACH TFS
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Not Present
– CHOICE Logical channel List	Configured
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– RACH TFCS	Not present
– PRACH partitioning
– Access Service Class
– ASC Settings	(ASC#0)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#1)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#2)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#3)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#4)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#5)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#6)
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– Persistence scaling factors
– Access Service Class
– Persistence scaling factor	0.9 (for ASC#2)
– Persistence scaling factor	0.9 (for ASC#3)
– Persistence scaling factor	0.9 (for ASC#4)
– Persistence scaling factor	0.9 (for ASC#5)
– Persistence scaling factor	0.9 (for ASC#6)
– AC-to-ASC mapping
– AC-to-ASC mapping table
– AC-to-ASC mapping	6 (AC0-9)
– AC-to-ASC mapping	5 (AC10)
– AC-to-ASC mapping	4 (AC11)
– AC-to-ASC mapping	3 (AC12)
– AC-to-ASC mapping	2 (AC13)
– AC-to-ASC mapping	1 (AC14)
– AC-to-ASC mapping	0 (AC15)
– CHOICE mode	TDD (no data)
– Secondary CCPCH system information
– Secondary CCPCH system information
– Secondary CCPCH info
– CHOICE mode	7.68 Mcps TDD
– Offset	0
– Common timeslot info
– 2nd interleaving mode	Frame
– TFCI coding	Reference clause 6.10 "Parameter Set"
– Puncturing limit	Reference clause 6.10 "Parameter Set"
– Repetition period	Not Present (MD "1")
– Repetition length	Not present (empty)
– Individual timeslot info
– CHOICE TDD option	7.68 Mcps TDD
– Timeslot number	1
– TFCI existence	Reference clause 6.10 "Parameter Set"
– Midamble Shift and burst type
– CHOICE TDD option	7.68 Mcps TDD
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	4
– Midamble Shift	Not Present
– CHOICE TDD option	7.68 Mcps TDD
– no data
– Code List
– Channelisation Code	(This IE is repeated for Code number for PCH and FACH)
– TFCS	(This IE is repeated for TFC number for PCH and FACH)
-CHOICE TFCI signalling
– Normal
– TFCI Field 1 information
– CHOICE TFCS representation	Complete reconfiguration
– TFCS complete information
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.
– CTFC information	Reference clause 6.10 "Parameter Set"
– Power offset information	Not Present
– FACH/PCH information
– TFS	(PCH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	12 (for PCH)
– CTCH indicator	FALSE
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	13 (for FACH)
– CTCH indicator	FALSE
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	14 (for FACH)
– CTCH indicator	FALSE
– PICH info
– CHOICE mode	TDD
– CHOICE TDD option	7.68 Mcps TDD
– Timeslot number	0
– Midamble shift and burst type
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	8
– Midamble Shift	Not Present
– Channelisation code	32/32
– Repetition period/length	64/2
– Offset	0
– Paging indicator length	4
– NGAP	4
– NPCH	2
– MCCH configuration information	Not Present
– CBS DRX Level 1 information	Not Present
– Frequency band indicator	Not Present
– Frequency band indicator 2	Not Present
– HSDPA cell Indicator	Not Present
– E-DCH cell Indicator	Not Present
– Secondary CCPCH system information MBMS	Not Present

Contents of System Information Block type 5bis (FDD)

The message structure of the System information block type 5bis should be the same as System information block type 5 with the following exceptions as given below.

– Frequency Band Indicator	A1	FDD Band under test
– Frequency Band Indicator 2		Not Present
– Frequency Band Indicator 3		Not Present
– Frequency Band Indicator	A2	Extension indicator
– Frequency Band Indicator 2		FDD Band under test
– Frequency Band Indicator 3		Not Present

Condition	Explanation
A1	Band IV
A2	Band IX, Band X

Contents of System Information Block type 6 in connected mode (FDD)

– PICH power offset	-5 dB
– CHOICE Mode	FDD
– AICH power offset	-5 dB
– Primary CCPCH info	Not Present
– PRACH system information list	Not present
– Secondary CCPCH system info	Not Present
– CBS DRX Level 1 information	Not Present

Contents of System Information Block type 6 in connected mode (similar to SIB type 5) (3.84 Mcps TDD)

– PICH Power offset	-5 dB
– CHOICE Mode	TDD
– PUSCH system information	Not Present
– PDSCH system information	Not Present
– TDD open loop power control
– Primary CCPCH Tx Power	30 dbm
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Alpha	(1/8)
– PRACH Constant Value	-10
– DPCH Constant Value	-10
– PUSCH Constant Value	-10
– Primary CCPCH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– CHOICE SyncCase	Sync Case 2
– Timeslot	0
– Cell parameters ID	Not Present
– SCTD indicator	FALSE
– PRACH system information list
– PRACH system information
– PRACH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Timeslot number	14
– PRACH Channelisation Code List
– CHOICE SF	SF8
– Channelisation Code List
– Channelisation Code	8/1
– Channelisation Code	8/2
– Channelisation Code	8/3
– Channelisation Code	8/4
– PRACH Midamble	Direct
– Transport channel Identity	15
– RACH TFS
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Not Present
– CHOICE Logical channel List	Configured
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– RACH TFCS	Not present
– PRACH partitioning
– Access Service Class
– ASC Settings	(ASC#0)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#1)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#2)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#3)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#4)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#5)
– CHOICE mode	TDD
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– ASC Settings	(ASC#6)
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Available Channelisation codes indices	Not Present (Default all)
– CHOICE subchannel size	Size1
– Available Subchannels	null
– Persistence scaling factors
– Access Service Class
– Persistence scaling factor	0.9 (for ASC#2)
– Persistence scaling factor	0.9 (for ASC#3)
– Persistence scaling factor	0.9 (for ASC#4)
– Persistence scaling factor	0.9 (for ASC#5)
– Persistence scaling factor	0.9 (for ASC#6)
– AC-to-ASC mapping	Not Present
– CHOICE mode	TDD (no data)
– Secondary CCPCH system information
– Secondary CCPCH system information
– Secondary CCPCH info
– CHOICE mode	TDD
– Offset	0
– Common timeslot info
– 2nd interleaving mode	Not Present (MD "Frame")
– TFCI coding	Reference clause 6.10 "Parameter Set"
– Puncturing limit	Reference clause 6.10 "Parameter Set"
– Repetition period	Not Present (MD "1")
– Repetition length	Not present
– Individual timeslot info
– CHOICE TDD option	3.84 Mcps TDD /REL-4/
– Timeslot number	1
– TFCI existence	Reference clause 6.10 "Parameter Set"
– Midamble Shift and burst type
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	4
– Midamble Shift	Not Present
– Code List
– Channelisation Code	Reference clause 6.10 "Parameter Set"
– TFCS	(This IE is repeated for TFC number for PCH and FACH.)
– Normal
– TFCI Field 1 information
– CHOICE TFCS representation	Complete reconfiguration
– TFCS complete reconfiguration information
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.
– CTFC information	Reference clause 6.10 "Parameter Set"
– Power offset information	Not Present
– FACH/PCH information
– TFS	(PCH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	12 (for PCH)
– CTCH indicator	FALSE
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– Transmission Time Interval	Reference clause 6.10 "Parameter Set"
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	13 (for FACH)
– TFS	(FACH)
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information	(This IE is repeated for TFI number.)
– RLC Size	Reference clause 6.10 "Parameter Set"
– Number of TB and TTI List	Reference clause 6.10 "Parameter Set"
– Number of Transport blocks	Reference clause 6.10 "Parameter Set"
– CHOICE Mode	TDD
– CHOICE Logical channel List	ALL
– Semi-static Transport Format information
– Transmission time interval	Reference clause 6.10 "Parameter Set"
– Type of channel coding	Reference clause 6.10 "Parameter Set"
– Coding Rate	Reference clause 6.10 "Parameter Set"
– Rate matching attribute	Reference clause 6.10 "Parameter Set"
– CRC size	Reference clause 6.10 "Parameter Set"
– Transport channel Identity	14 (for FACH)
– CTCH indicator	FALSE
– CTCH indicator	FALSE
– PICH info
– CHOICE mode	TDD
– CHOICE TDD option	3.84 Mcps TDD
– Timeslot number	0
– Midamble shift and burst type
– CHOICE Burst Type	Type 1
– Midamble Allocation Mode	Default midamble
– Midamble configuration burst type 1 and 3	8
– Midamble Shift	Not Present
– Channelisation code	16/16
– Repetition period/length	64/2
– Offset	0
– Paging indicator length	4
– NGAP	4
– NPCH	2
– CBS DRX Level 1 information	Not Present

Contents of System Information Block type 6 In connected mode (1.28 Mcps TDD)

– PICH Power offset	-5 dB
– CHOICE Mode	TDD
– PUSCH system information	Not Present
– PDSCH system information	Not Present
– TDD open loop power control
– Primary CCPCH Tx Power	30 dBm
– CHOICE TDD option	1.28 Mcps TDD /REL-4/
– Primary CCPCH info	Not Present
– PRACH system information list	Not Present
– Secondary CCPCH system information	Not Present
– CBS DRX Level 1 information	Not Present

Contents of System Information Block type 6 in connected mode (7.68 Mcps TDD)

– PICH Power offset	-5 dB
– CHOICE Mode	TDD
– PUSCH system information	Not Present
– PDSCH system information	Not Present
– TDD open loop power control	Not present
– Primary CCPCH info	Not Present
– PRACH system information list	Not Present
– Secondary CCPCH system information	Not Present
– CBS DRX Level 1 information	Not Present

Contents of System Information Block type 7 (FDD)

CHOICE Mode	FDD
– UL interference	-100 dBm
– PRACHs listed in system information block type5
– Dynamic persistence level	2
– PRACHs listed in system information block type6	Not Present
– Expiration Time Factor	Not Present – use default value of 1

Contents of System Information Block type 7 (TDD)

CHOICE Mode	TDD
PRACHs listed in system information block type5
– Dynamic persistence level	2
PRACHs listed in system information block type6
– Dynamic persistence level	2
Expiration Time Factor	Not Present – use default value of 1

Contents of System Information Block type 8, 9 (only for FDD R99 and Rel-4)

This information is used for static CPCH in the cell, so this is not present.

Contents of System Information Block type 10 (only for FDD R99 and Rel-4)

This information is used for DRAC, so this is not present.

Contents of System Information Block type 11 (FDD)

This is the default message content of SIB 11 for cell 1.

See clause 6.1.4 for the difference in message contents of System Information Block type 11 (FDD) for cell 2 to 8.

See clause 6.1.4.3 for the difference in message contents of System information Block type 11(FDD) for cell 21 to 28

– SIB12 indicator	A1, A2, A3	TRUE
– FACH measurement occasion info		Not Present
– Measurement control system information
– Use of HCS		Not used
– Cell selection and reselection quality measure		CPICH RSCP
– Intra-frequency measurement system information	A1, A2, A3
– Intra-frequency measurement identity		Not Present Absence of this IE is equivalent to default value 1
– Intra-frequency cell info list
– CHOICE intra-frequency cell removal		Not present (This IE shall be ignored by the UE for SIB11)
– New intra-frequency cells
– Intra-frequency cell id		1
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0 dB
– Reference time difference to cell		Not Present
– Read SFN indicator		FALSE
– CHOICE mode		FDD
– Primary CPICH info
– Primary scrambling code		Refer to clause titled "Default settings for cell No.1 (FDD)" in clause 6.1.4
– Primary CPICH TX power		Not Present
– TX Diversity indicator		FALSE
– Cell Selection and Re-selection info		Not Present (The IE shall be absent as this is the serving cell)
– Intra-frequency cell id		2
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0dB
– Reference time difference to cell		Not present
– Read SFN indicator		TRUE
– CHOICE mode		FDD
– Primary CPICH info
– Primary scrambling code		Refer to clause titled "Default settings for cell No.2 (FDD)" in clause 6.1.4
– Primary CPICH TX power		Not Present
– TX Diversity indicator		FALSE
– Cell Selection and Re-selection info		Not present For neighbouring cell, if HCS is not used and all the parameters in cell selection and re-selection info are Default value, this IE is absent.
– Intra-frequency cell id		3
– Cell info		Same content as specified for Intra-frequency cell id=2 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.3 (FDD)" in clause 6.1.4
– Intra-frequency cell id	A1, A3	7
– Cell info		Same content as specified for Intra-frequency cell id=2 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.7 (FDD)" in clause 6.1.4 Note that this cell can also be configured as an inter-frequency cell on f3.
– Intra-frequency cell id	A1, A3	8
– Cell info		Same content as specified for Intra-frequency cell id=2 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.8 (FDD)" in clause 6.1.4 Note that this cell can also be configured as an inter-frequency cell on f3.
– Intra-frequency cell id	A3	11
– Cell info		Same content as specified for Intra-frequency cell id=2 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.11 (FDD)" in clause 6.1.4
– Cells for measurement	A1, A2, A3	Not Present
– Intra-frequency measurement quantity	A1, A2, A3
– Filter coefficient		Not present Absence of this IE is equivalent to the default value 0
– CHOICE mode		FDD
– Measurement quantity		CPICH RSCP
– Intra-frequency reporting quantity for RACH Reporting		Not Present
– Maximum number of reported cells on RACH		Not Present
– Reporting information for state CELL_DCH
– Intra-frequency reporting quantity
– Reporting quantities for active set cells
– Cell synchronization information reporting indicator		FALSE
– Cell identity reporting indicator		TRUE
– CHOICE mode		FDD
– CPICH Ec/N0 reporting indicator		FALSE
– CPICH RSCP reporting indicator		TRUE
– Pathloss reporting indicator		FALSE
– Reporting quantities for monitored set cells
– Cell synchronization information reporting indicator		TRUE
– Cell identity reporting indicator		TRUE
– CHOICE mode		FDD
– CPICH Ec/N0 reporting indicator		FALSE
– CPICH RSCP reporting indicator		TRUE
– Pathloss reporting indicator		FALSE
– Reporting quantities for detected set cells		Not Present
– Measurement reporting mode
– Measurement Report Transfer Mode		Acknowledged mode RLC
– Periodic Reporting/Event Trigger Reporting Mode		Event trigger
– CHOICE report criteria		Intra-frequency measurement reporting criteria
– Intra-frequency measurement reporting criteria
– Parameters required for each event		3 kinds
– Intra-frequency event identity		1a
– Triggering condition 1		Not Present
– Triggering condition 2		Monitored set cells
– Reporting Range Constant		10 (5dB)
– Cells forbidden to affect Reporting range		Not Present
– W		1(0.1): 34.123 test cases 10(1.0): 34.121 test cases
– Hysteresis		0 (0.0)
– Threshold Used Frequency		Not Present
– Reporting deactivation threshold		2
– Replacement activation threshold		Not Present
– Time to trigger		640
– Amount of reporting		4
– Reporting interval		4 000
– Reporting cell status
– CHOICE reported cell		Report cell within active set and/or monitored set cells on used frequency
– Maximum number of reported cells		3
– Intra-frequency event identity		1b
– Triggering condition 1		Active set cells
– Triggering condition 2		Not Present
– Reporting Range Constant		10 (5dB)
– Cells forbidden to affect Reporting range		Not Present
– W		1 (0.1): 34.123 test cases 10(1.0): 34.121 test cases
– Hysteresis		0 (0.0)
– Threshold Used Frequency		Not Present
– Reporting deactivation threshold		Not Present
– Replacement activation threshold		Not Present
– Time to trigger		640
– Amount of reporting		Not Present
– Reporting interval		Not Present
– Reporting cell status
– CHOICE reported cell		Report cell within active set and/or monitored set cells on used frequency
– Maximum number of reported cells		3
– Intra-frequency event identity		1c
– Triggering condition 1		Not Present
– Triggering condition 2		Not Present
– Reporting Range Constant		Not Present
– Cells forbidden to affect Reporting range		Not Present
– W		Not Present
– Hysteresis		0 (0.0)
– Threshold Used Frequency		Not Present
– Reporting deactivation threshold		Not Present
– Replacement activation threshold		3
– Time to trigger		640
– Amount of reporting		4
– Reporting interval		4 000
– Reporting cell status
– CHOICE reported cell		Report cell within active set and/or monitored set cells on used frequency
– Maximum number of reported cells		3
– Inter-frequency measurement system information	A1, A2
– Inter-frequency cell info list
– CHOICE Inter-frequency cell removal		Not present (This IE shall be ignored by the UE for SIB11)
– New inter-frequency cells
– Inter frequency cell id		4
– Frequency info
– CHOICE mode		FDD
– UARFCN uplink(Nu)		Not present Absence of this IE is equivalent to apply the default duplex distance defined for the operating frequency according to 3GPP TS 25.101 [11]
– UARFCN downlink(Nd)		Reference to table 6.1.2 for Cell 4
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0 dB
– Reference time difference to cell		Not present
– Read SFN indicator		FALSE
– CHOICE mode		FDD
– Primary CPICH info
– Primary scrambling code		Refer to clause titled "Default settings for cell No.4 (FDD)" in clause 6.1.4
– Primary CPICH Tx power		Not present
– TX Diversity Indicator		FALSE
– Cell Selection and Re-selection Info		Not present (same values as for serving cell applies)
– Inter frequency cell id		5
– Frequency info		Not Present Absence of this IE is equivalent to value of the previous "frequency info" in the list.
– Cell info		Same content as specified for Inter-frequency cell id=4 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.5 (FDD)" in clause 6.1.4
– Inter frequency cell id		6
– Frequency info		Not Present Absence of this IE is equivalent to value of the previous "frequency info" in the list.
– Cell info		Same content as specified for Inter-frequency cell id=4 with the exception that value for Primary scrambling code shall be according to clause titled "Default settings for cell No.6 (FDD)" in clause 6.1.4
– Cell for measurement		Not present
– Inter-RAT measurement system information	A1, A3	Not Present
– Inter-RAT measurement system information	A2
– Inter-RAT cell info list
– CHOICE Inter-RAT cell removal		Not Present (This IE shall be ignored by the UE for SIB11)
– New inter-RAT cells
– Inter-RAT cell id		9
– CHOICE Radio Access Technology		GSM
– GSM
– Cell individual offset		0
– Cell selection and re-selection info		Not Present
– BSIC
– Base transceiver Station Identity Code (BSIC)		Reference to table 6.1.10 for Cell 9
– Band indicator		According to PICS/PIXIT
– BCCH ARFCN		Reference to table 6.1.10 for Cell 9
– Inter-RAT cell id		10
– CHOICE Radio Access Technology		GSM
– GSM
– Cell individual offset		0
– Cell selection and re-selection info		Not Present
– BSIC
– Base transceiver Station Identity Code (BSIC)		Reference to table 6.1.10 for Cell 10
– Band indicator		According to PICS/PIXITs
– BCCH ARFCN		Reference to table 6.1.10 for Cell 10
– Cell for measurement		Not present
– Traffic volume measurement system information	A1, A2, A3	Not Present

Condition	Explanation
A1	FDD cell environment
A2	FDD/GSM inter-RAT cell environment
A3	FDD intra-frequency cell environment (6 intra-frequency cells without inter-frequency cells)

Contents of System Information Block type 11 (3.84 Mcps, 1.28 Mcps and 7.68 Mcps TDD)

This is the default message content of SIB 11 for cell 1.

See clause 6.1.4 for the difference in message contents of System Information Block type 11 (TDD) for cell 2 to 8.

– SIB 12 Indicator	A1, A2	TRUE
– FACH measurement occasion info		Not Present
– Measurement control system information
– Use of HCS		Not used
– Cell selection and reselection quality measureCell		CPICH RSCP
– Intra-frequency measurement system information	A1, A2
– Intra-frequency measurement identity		Not Present Absence of this IE is equivalent to default value 1
– Intra-frequency cell info list
– CHOICE intra-frequency cell removal		Not present (This IE shall be ignored by the UE for SIB11)
– New intra-frequency cells
– Intra-frequency cell id		1
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0dB
– Reference time difference to cell		Not Present
– Read SFN Indicator		FALSE
– CHOICE mode		TDD
– Primary CCPCH info
– Cell parameters ID		Reference clause 6.1.4 Default settings for cell
– Primary CCPCH TX power		Not Present
– Timeslot list		Not Present
– CHOICE TDD option
– 3.84 Mcps TDD
– Timeslot number		Not Present
– Burst type		Not Present
– 1.28 Mcps TDD
– Timeslot number		Not Present
– Cell Selection and Re-selection info		Not Present (The IE shall be absent as this is the serving cell)
– Intra-frequency cell id		2
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0dB
– Reference time difference to cell		Not Present
– Read SFN Indicator		FALSE
– CHOICE mode		TDD
– Primary CCPCH info
– Cell parameters ID		Refer to clause titled “Default setting for cell No.2 (TDD)” in clause 6.1.4
– Primary CCPCH TX power		Not Present
– Timeslot list		Not Present
– CHOICE TDD option
– 3.84 Mcps TDD
– Timeslot number		Not Present
– Burst type		Not Present
– 1.28 Mcps TDD
– Timeslot number		Not Present
– Cell Selection and Re-selection info		Not Present
– Intra-frequency cell id		3
– Cell info		Same content as specified for intra-frequency cell id=2 with the exception that value for Cell Parameters ID shall be according to clause titled “Default settings for cell No.3(TDD)” in clause 6.1.4
– Intra-frequency cell id		7
– Cell info		Same content as specified for intra-frequency cell id=2 with the exception that value for Cell Parameters ID shall be according to clause titled “Default settings for cell No.7(TDD)” in clause 6.1.4
– Intra-frequency cell id		8
– Cell info		Same content as specified for intra-frequency cell id=2 with the exception that value for Cell Parameters ID shall be according to clause titled “Default settings for cell No.8(TDD)” in clause 6.1.4
– Cell for measurement	A1, A2	Not Present
– Intra-frequency measurement quantity	A1, A2
– Filter coefficient		Not present Absence of this IE is equivalent to the default value 0
– CHOICE mode		TDD
– Measurement quantity list
– Measurement quantity		P-CCPCH RSCP
– Intra-frequency reporting quantity for RACH Reporting		Not Present
– Maximum number of reported cells on RACH		Not Present
– Reporting information for state CELL_DCH
– Intra-frequency reporting quantity
– Reporting quantities for active set cells
– Cell synchronization information reporting indicator		TRUE
– Cell identity reporting indicator		TRUE
– CHOICE mode		TDD
– Timeslot ISCP reporting indicator		FALSE
– Proposed TSGN reporting required		FALSE
– P-CCPCH RSCP reporting indicator		TRUE
– Pathloss reporting indicator		FALSE
– Reporting quantities for monitored set cells
– Cell synchronization information reporting indicator		FALSE
– Cell identity reporting indicator		TRUE
– CHOICE mode		TDD
– Timeslot ISCP reporting indicator		FALSE
– Proposed TSGN reporting required		FALSE
– P-CCPCH RSCP reporting indicator		TRUE
– Pathloss reporting indicator		FALSE
– Reporting quantities for detected set cells		Not Present
– Measurement reporting mode
– Measurement Report Transfer Mode		Acknowledged mode RLC
– Periodical Reporting / Event Trigger Reporting Mode		Event trigger
-CHOICE report criteria
– Intra-frequency measurement reporting criteria
– Parameters required for each event
– Intra-frequency event identity		1g
– Triggering condition1		Not Present
– Triggering condition2		Not Present
– Reporting Range Constant		Not Present
– cells forbidden to affect reporting range		Not Present
– W(optional in case of 1a,1b)		Not Present
– Hysteresis		0.0
– Threshold used frequency		Not Present
– Reporting deactivation threshold		3
– Replacement activation threshold		Not Present
– Time to trigger		640
– Amount of reporting		4
– Reporting interval		4000
– Reporting cell status
– CHOICE reported cells		Report cell within active set and/or monitored cells on used frequency
– Maximum number of reported cells		3
– Inter-frequency measurement system information	A1, A2
– Inter-frequency cell info list
– CHOICE Inter-frequency cell removal		Not present (This IE shall be ignored by the UE for SIB11)
– New inter-frequency cells
– Inter frequency cell id		4
– Frequency info
– CHOICE mode		TDD
– UARFCN (Nt)		Reference to table 6.1.7 for Cell 4
– Cell info
– Cell individual offset		Not present Absence of this IE is equivalent to default value 0dB
– Reference time difference to cell		Not present
– Read SFN indicator		FALSE
– CHOICE mode		TDD
– Primary CCPCH info		Refer to clause titled "Default settings for cell No.4 (TDD)" in clause 6.1.4
– Primary CCPCH Tx power		Not present
– TX Diversity Indicator		FALSE
– Cell Selection and Re-selection Info		Not present (same values as for serving cell applies)
– Inter frequency cell id		5
– Frequency info		Not Present Absence of this IE is equivalent to value of the previous "frequency info" in the list.
– Cell info		Same content as specified for Inter-frequency cell id=4 with the exception that value for Cell parameters ID shall be according to clause titled "Default settings for cell No.5 (TDD)" in clause 6.1.4
– Inter frequency cell id		6
– Frequency info		Not Present Absence of this IE is equivalent to value of the previous "frequency info" in the list.
– Cell info		Same content as specified for Inter-frequency cell id=4 with the exception that value for Cell parameters ID shall be according to clause titled "Default settings for cell No.6 (TDD)" in clause 6.1.4
– Cell for measurement		Not present
– Inter-RAT measurement system information	A1	Not Present
– Inter-RAT measurement system information	A2
– Inter-RAT cell info list
– CHOICE Inter-RAT cell removal		Not Present (This IE shall be ignored by the UE for SIB11)
– New inter-RAT cells
– Inter-RAT cell id		9
– CHOICE Radio Access Technology		GSM
– GSM
– Cell individual offset		0
– Cell selection and re-selection info		Not Present
– BSIC
– Base transceiver Station Identity Code (BSIC)		Reference to table 6.1.10 for Cell 9
– Band indicator		According to PICS/PIXIT
– BCCH ARFCN		Reference to table 6.1.10 for Cell 9
– Inter-RAT cell id		10
– CHOICE Radio Access Technology		GSM
– GSM
– Cell individual offset		0
– Cell selection and re-selection info		Not Present
– BSIC
– Base transceiver Station Identity Code (BSIC)		Reference to table 6.1.10 for Cell 10
– Band indicator		According to PICS/PIXITs
– BCCH ARFCN		Reference to table 6.1.10 for Cell 10
– Cell for measurement		Not present
– Traffic volume measurement system information	A1, A2	Not Present

Condition	Explanation
A1	TDD cell environment
A2	TDD/GSM inter-RAT cell environment

Contents of System Information Block type 12 in connected mode (FDD)

This is the default message content of SIB 12 for cell 1.

See clause 6.1.4 for the difference in message contents of System Information Block type 12 (FDD) for cell 2 to 8.

– FACH measurement occasion info	Not Present
– Measurement control system information
– Use of HCS	Not used
– Cell selection and reselection quality measure	CPICH RSCP
– Intra-frequency measurement system information	Not Present
– Inter-frequency measurement system information	Not Present
– Inter-RAT measurement system information	Not Present
– Traffic volume measurement system information	Not Present

Contents of System Information Block type 12 in connected mode (3.84 Mcps, 1.28 Mcps and 7.68 Mcps TDD)

This is the default message content of SIB 12 for cell 1.

See clause 6.1.4 for the difference in message contents of System Information Block type 12 (TDD) for cell 2 to 8.

– FACH measurement occasion info	Not Present
– Measurement control system information
– Use of HCS	Not used
– Cell selection and reselection quality measure	CPICH RSCP
– Intra-frequency measurement system information	Not Present
– Inter-RAT measurement system information	Not Present
– Traffic volume measurement system information	Not Present

Contents of System Information Block type 13 (used when supported PLMN type is ANSI-41)

– CN Domain system information list
– CN Domain system information	For Packet-Switched domain
– CN domain identity	PS
– CHOICE CN Type	ANSI-41
– CN domain specific NAS system information
– NAS (ANSI-41) system information	T.B.D
– CN domain specific DRX cycle length coefficient	7
– CN Domain system information	For Circuit-Switched domain
– CN domain identity	CS
– CHOICE CN Type	ANSI-41
– CN domain specific NAS system information
– NAS (ANSI-41) system information	T.B.D
– CN domain specific DRX cycle length coefficient	7
– UE timers and constants in idle mode
– T300	400 milliseconds
– N300	3
– T312	10 seconds
– N312	200
– Capability update requirement
– UE radio access FDD capability update requirement	TRUE
– UE radio access TDD capability update requirement	FALSE
– System specific capability update requirement list	Not Present

Contents of System Information Block type 14 (3.84 Mcps and 7.68 Mcps TDD)

– Individual Timeslot interference list
– Individual Timeslot interference
– Timeslot number	2
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	3
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	4
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	5
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	6
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	7
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	9
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	10
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	11
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	12
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	13
– UL Timeslot Interference	-90 dbm
– Individual Timeslot interference
– Timeslot number	14
– UL Timeslot Interference	-90 dbm
– Expiration Time Factor	Not Present (MD "1")

Contents of System Information Block type 16 (FDD)

– Pre-Defined Radio Configuration	(12.2 KBPS AMR)
– Pre-defined RB configuration
– Re-establishment timer	useT315
– SRB InformationList
– Signalling RB information to setup	(UM DCCH for RRC)
– RB identity	1
– CHOICE RLC info type
– RLC info
– CHOICE Uplink RLC mode	UM RLC
– Transmission RLC discard	timerBasedNoExplicit : dt100
– CHOICE Downlink RLC mode	UM RLC
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	5
– Logical channel identity	1
– CHOICE RLC size list	Configured
– MAC logical channel priority	1
– Downlink RLC logical channel info
– Number of RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	10
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	1
– Signalling RB information to setup	(AM DCCH for RRC)
– RB identity	2
– CHOICE RLC info type
– RLC info
– CHOICE Uplink RLC mode	AM RLC
– Transmission RLC discard
– SDU discard mode	Max DAT retransmissions
– MAX_DAT	4
– Timer_MRW	100
– MaxMRW	4
– Transmission window size	8
– Timer_RST	500
– Max_RST	4
– Polling info
– Timer_poll_prohibit	200
– Timer_poll	200
– Poll_PDU	Not Present
– Poll_SDU	1
– Last transmission PDU poll	TRUE
– Last retransmission PDU poll	TRUE
– Poll_Window	99
– Timer_poll_periodic	Not Present
– CHOICE Downlink RLC mode	AM RLC
– In-sequence delivery	TRUE
– Receiving window size	8
– Downlink RLC status info
– Timer_status_prohibit	200
– Timer_EPC	200
– Missing PDU indicator	TRUE
– Timer_STATUS_periodic	Not Present
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	5
– Logical channel identity	2
– CHOICE RLC size list	Configured
– MAC logical channel priority	2
– Downlink RLC logical channel info
– Number of RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	10
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	2
– Signalling RB information to setup	(AM DCCH for RRC)
– RB identity	3
– CHOICE RLC info type
– RLC info
– CHOICE Uplink RLC mode	AM RLC
– Transmission RLC discard
– SDU discard mode	Max DAT retransmissions
– MAX_DAT	4
– Timer_MRW	100
– MaxMRW	4
– Transmission window size	8
– Timer_RST	500
– Max_RST	4
– Polling info
– Timer_poll_prohibit	200
– Timer_poll	200
– Poll_PDU	Not Present
– Poll_SDU	1
– Last transmission PDU poll	TRUE
– Last retransmission PDU poll	TRUE
– Poll_Window	99
– Timer_poll_periodic	Not Present
– CHOICE Downlink RLC mode	AM RLC
– In-sequence delivery	TRUE
– Receiving window size	8
– Downlink RLC status info
– Timer_status_prohibit	200
– Timer_EPC	200
– Missing PDU indicator	TRUE
– Timer_STATUS_periodic	Not Present
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	5
– Logical channel identity	3
– CHOICE RLC size list	Configured
– MAC logical channel priority	3
– Downlink RLC logical channel info
– Number of RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	10
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	3
– Signalling RB information to setup	(AM DCCH for RRC)
– RB identity	4
– CHOICE RLC info type
– RLC info
– CHOICE Uplink RLC mode	AM RLC
– Transmission RLC discard
– SDU discard mode	Max DAT retransmissions
– MAX_DAT	4
– Timer_MRW	100
– MaxMRW	4
– Transmission window size	8
– Timer_RST	500
– Max_RST	4
– Polling info
– Timer_poll_prohibit	200
– Timer_poll	200
– Poll_PDU	Not Present
– Poll_SDU	1
– Last transmission PDU poll	TRUE
– Last retransmission PDU poll	TRUE
– Poll_Window	99
– Timer_poll_periodic	Not Present
– CHOICE Downlink RLC mode	AM RLC
– In-sequence delivery	TRUE
– Receiving window size	8
– Downlink RLC status info
– Timer_status_prohibit	200
– Timer_EPC	200
– Missing PDU indicator	TRUE
– Timer_STATUS_periodic	Not Present
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	5
– Logical channel identity	4
– CHOICE RLC size list	Configured
– MAC logical channel priority	4
– Downlink RLC logical channel info
– Number of RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	10
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	4
– RAB information for setup
– RB information to setup
– RB identity	10
– PDCP info	Not Present
– CHOICE RLC info type	RLC info
– CHOICE Uplink RLC mode	TM RLC
– Transmission RLC discard	Not Present
– Segmentation indication	TRUE
– CHOICE Downlink RLC mode	TM RLC
– Segmentation indication	TRUE
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of uplink RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	1
– Logical channel identity	7
– CHOICE RLC size list	Configured
– MAC logical channel priority	6
– Downlink RLC logical channel info
– Number of downlink RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	6
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	7
– RB identity	11
– PDCP info	Not Present
– CHOICE RLC info type	RLC info
– CHOICE Uplink RLC mode	TM RLC
– Transmission RLC discard	Not Present
– Segmentation indication	TRUE
– CHOICE Downlink RLC mode	TM RLC
– Segmentation indication	TRUE
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of uplink RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	2
– Logical channel identity	8
– CHOICE RLC size list	Configured
– MAC logical channel priority	6
– Downlink RLC logical channel info
– Number of downlink RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	7
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	8
– RB identity	12
– PDCP info	Not Present
– CHOICE RLC info type	RLC info
– CHOICE Uplink RLC mode	TM RLC
– Transmission RLC discard	Not Present
– Segmentation indication	TRUE
– CHOICE Downlink RLC mode	TM RLC
– Segmentation indication	TRUE
– RB mapping info
– Information for each multiplexing option
– RLC logical channel mapping indicator	Not Present
– Number of uplink RLC logical channels	1
– Uplink transport channel type	DCH
– UL Transport channel identity	3
– Logical channel identity	9
– CHOICE RLC size list	Configured
– MAC logical channel priority	6
– Downlink RLC logical channel info
– Number of downlink RLC logical channels	1
– Downlink transport channel type	DCH
– DL DCH Transport channel identity	8
– DL DSCH Transport channel identity	Not Present
– Logical channel identity	9
– Pre-Defined Transport Channel Configuration
– UL CommonTransChInfo
– UL TFCS
– TFC subset	Default value is the complete existing set of transport format combinations
– Allowed Transport Format combination	0,1,2,3,4,5
– PRACH TFCS	Not Present
– CHOICE mode	FDD
– CHOICE TFCI signalling	Normal
– TFCI Field 1 information
– CHOICE TFCS representation	Addition
– TFCS addition configure information
– CHOICE TFCS Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.2.4.1.4.1 Parameter Set.
– CTFC information	This IE is repeated for TFC numbers and reference to clause 6.10.2.4.1.4.1 Parameter Set
– Power offset information
– CHOICE Gain Factors	Signalled Gain Factor
– CHOICE mode	FDD
– Gain factor ßc	0
– Gain factor ßd	0
– Reference TFC ID	0
– Power offset Pp-m	0 dB
– Reference TFC ID	0
– Power offset Pp-m	0 dB
– Added or Reconfigured UL TrCH information	4 TrCHs(DCH for DCCH and 3DCHs for DTCH)
– Uplink transport channel type	DCH
– UL Transport channel identity	1
– TFS
– CHOICE Transport channel type	Dedicated transport channels
– Dynamic Transport format information
– RLC Size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Number of TBs and TTI List	(This IE is repeated for TFI number.)
– Transmission Time Interval	Not Present
– Number of Transport blocks	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CHOICE Logical channel list	All
– Semi-static Transport Format information
– Transmission time interval	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Type of channel coding	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Coding Rate	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Rate matching attribute	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CRC size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Uplink transport channel type	DCH
– UL Transport channel identity	2
– TFS
– CHOICE Transport channel type	Dedicated transport channels
– Dynamic Transport format information
– RLC Size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Number of TBs and TTI List	(This IE is repeated for TFI number.)
– Transmission Time Interval	Not Present
– Number of Transport blocks	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CHOICE Logical channel list	All
– Semi-static Transport Format information
– Transmission time interval	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Type of channel coding	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Coding Rate	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Rate matching attribute	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CRC size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Uplink transport channel type	DCH
– UL Transport channel identity	3
– TFS
– CHOICE Transport channel type	Dedicated transport channels
– Dynamic Transport format information
– RLC Size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Number of TBs and TTI List	(This IE is repeated for TFI number.)
– Transmission Time Interval	Not Present
– Number of Transport blocks	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CHOICE Logical channel list	All
– Semi-static Transport Format information
– Transmission time interval	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Type of channel coding	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Coding Rate	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Rate matching attribute	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– CRC size	Reference to clause 6.10.2.4.1.4.1 Parameter Set
– Uplink transport channel type	DCH
– UL Transport channel identity	5
– TFS
– CHOICE Transport channel type	Dedicated transport channels
– Dynamic Transport format information
– RLC Size	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– Number of TBs and TTI List	(This IE is repeated for TFI number.)
– Transmission Time Interval	Not Present
– Number of Transport blocks	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– CHOICE Logical channel list	All
– Semi-static Transport Format information
– Transmission time interval	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– Type of channel coding	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– Coding Rate	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– Rate matching attribute	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– CRC size	Reference to clause 6.10.2.4.1.2.1 Parameter Set
– DL CommonTransChInfo
– SCCPCH TFCS	Not Present
– CHOICE mode	FDD
– CHOICE DL parameters	SameasUL
– Added or Reconfigured DL TrCH information	4 TrCHs(DCH for DCCH and 3DCHs for DTCH)
– Downlink transport channel type	DCH
– DL Transport channel identity	6
– CHOICE DL parameters	Same as UL
– Uplink transport channel type	DCH
– UL TrCH identity	1
– DCH quality target
– BLER Quality value	0
– Downlink transport channel type	DCH
– DL Transport channel identity	7
– CHOICE DL parameters	Same as UL
– Uplink transport channel type	DCH
– UL TrCH identity	2
– DCH quality target
– BLER Quality value	0
– Downlink transport channel type	DCH
– DL Transport channel identity	8
– CHOICE DL parameters	Same as UL
– Uplink transport channel type	DCH
– UL TrCH identity	3
– DCH quality target
– BLER Quality value	0
– Downlink transport channel type	DCH
– DL Transport channel identity	10
– CHOICE DL parameters	Same as UL
– Uplink transport channel type	DCH
– UL TrCH identity	5
– DCH quality target
– BLER Quality value	0
– Pre-Defined Physical Channel Configuration
– Uplink DPCH power control info Predef
– CHOICE mode	FDD
– Power Control Algorithm	Algorithm1
– CHOICE mode	FDD
– TFCI existence	FALSE
– Puncturing Limit	0.88
– Downlink DPCH power control info Predef
– CHOICE mode	FDD
– Spreading factor	128
– Fixed or Flexible Position	Fixed
– TFCI existence	FALSE

Contents of System Information Block type 17 (3.84 Mcsps TDD and 1.28 Mcps TDD)

This system information block contains fast changing parameters for the configuration of the shared physical channels to be used in connected mode, so this is not present.

Contents of System Information Block type 18

– Idle mode PLMN identities
– PLMNs of intra-frequency cells list	Not present
– PLMNs of inter-frequency cells list	Not present
– PLMNs of inter-RAT cells list	Not present
– Connected mode PLMN identities	Not present

Contents of System Information Block type 19

The system information block type 19 contains Inter-RAT frequency and priority information to be used in the cell

Information Element	Value/remark	Version
SysInfoType19		REL-8 or later
utra-PriorityInfoList
utra-ServingCell
priority	3
s-PrioritySearch1	0 (0dB)
s-PrioritySearch2	Not present
threshServingLow	0 (0dB)

utran-FDD-FrequencyList (SIZE(1..maxNumFDDFreqs))	Not present
utran-TDD-FrequencyList (SIZE(1..maxNumTDDFreqs))	Not present
gsm-PriorityInfoList (SIZE (1..maxNumGSMCellGroup))	Not present
eutra-FrequencyAndPriorityInfoList (SIZE (1..maxNumEUTRAFreqs))	Not present
nonCriticalExtensions SEQUENCE	Not present

Contents of System Information Block type 21

Information Element	Value/remark
EAB Parameters
– CHOICE barring representation
– EAB Parameters Per PLMN List	Not present
– EAB Parameters For All
– Common EAB Parameters
– EAB Category	a
– EAB Access Class Barred List	10 items
– Access Class Barred[y]	‘Barred’.

Contents of System Information Block type 22

Information Element	Value/remark
– PRACH preamble control parameters extension list Type 1 (for Enhanced Uplink)	Not present
– PRACH preamble control parameters extension list Type 2 (for Enhanced Uplink)	Not present
– PRACH preamble control parameters extension list Type 3 (for Enhanced Uplink)	Not present
– Concurrent Deployment of 2ms and 10ms TTI	Not present
– NodeB triggered HS-DPCCH Transmission	Not present
– Fallback R99 PRACH info	Not present
– Common E-DCH Resource Configuration Information List Extension	Not present
– HS-DSCH DRX in CELL_FACH with second DRX cycle Information	Not present

Contents of System Information Block type 23

Information Element	Condition	Value/remark
– CHOICE WLAN representation		WLAN Offload Information common for all PLMN
– WLAN Offload Information
– WLAN Offload Configuration
-Threshold Serving RSCP	RSCP
-ThreshservingOffloadWLAN, low		Set according to specific message content
-ThreshservingOffloadWLAN, high		Set according to specific message content
-Threshold Serving Ec/N0	Ec/No
-ThreshservingOffloadWLAN, low2		Set according to specific message content
-ThreshservingOffloadWLAN, high2		Set according to specific message content
-Threshold Channel Utilization	ChannelUtilization
-ThreshchUtilWLAN, low		Set according to specific message content
-ThreshchUtilWLAN, high		Set according to specific message content
-Threshold Backhaul Bandwidth	BackHaul
-ThreshbackhRateDLWLAN, low		Set according to specific message content
-ThreshbackhRateDLWLAN, high		Set according to specific message content
-ThreshbackhRateULWLAN, low		Set according to specific message content
-ThreshbackhRateULWLAN, high		Set according to specific message content
-Threshold Beacon RSSI	RSSI
-ThreshBeaconRSSIWLAN, low		Set according to specific message content
-ThreshBeaconRSSIWLAN, high		Set according to specific message content
-Offload Preference Indicator		‘1111 1111 1111 1111’B
-TsteeringWLAN		0
-WLAN Identifier List		Only 1 WLAN identifier broadcasted
– WLAN Identifier
– WLAN Type ID
-SSID		Set as per Table 4.4.8-1 of 36.508[45]
-BSSID		Not Present
-HESSID		Not Present

Condition	Explanation
RSCP	RSCP based thresholds are to be used
Ec/No	Ec/No based thresholds are to be used
ChannelUtilization	Channel Utilization based thresholds are to be used
BackHaul	BackHaul Bandwidth based thresholds are to be used
RSSI	Beacon RSSI based thresholds are to be used