5 Measurements related to the NodeB and RNC
32.4053GPPPerformance Management (PM)Performance measurementsRelease 17Telecommunication managementTSUniversal Terrestrial Radio Access Network (UTRAN)
5.1 Power, Energy and Environmental (PEE) measurements
5.1.0 Applicability of measurementsThe energy efficiency related measurement definitions in the following clauses X.1.n are valid only for NodeBs and RNCs having built-in sensors (cf. ETSI ES 202 336-12 [22]).
5.1.1 Power
5.1.1.1 Average Power
a) This measurement provides the average power consumed.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clauses 4.4.3.1, 4.4.3.4, Annex A.
d) Each measurement is a real value in Watt (W).
e) The measurement name has the form PEE.AvgPower.
f) NodeBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.1.2 Minimum Power
a) This measurement provides the minimum power consumed.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clauses 4.4.3.1, 4.4.3.4, Annex A.
d) Each measurement is a real value in Watt (W).
e) The measurement name has the form PEE.MinPower.
f) NodeBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.1.3 Maximum Power
a) This measurement provides the maximum power consumed.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clauses 4.4.3.1, 4.4.3.4, Annex A.
d) Each measurement is a real value in Watt (W).
e) The measurement name has the form PEE.MaxPower.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.2 Energy
a) This measurement provides the energy consumed.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clauses 4.4.3.2, 4.4.3.4, Annex A.
d) Each measurement is a real value in kilo Watt hour (kWh).
e) The measurement name has the form PEE.Energy.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.3 Temperature
5.1.3.1 Average Temperature
a) This measurement provides the average temperature.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clause 4.4.3.4, Annex A.
d) Each measurement is a real value in Degree Celsius (C°).
e) The measurement name has the form PEE.AvgTemperature.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.3.2 Minimum Temperature
a) This measurement provides the minimum temperature.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clause 4.4.3.4, Annex A.
d) Each measurement is a real value in Degree Celsius (C°).
e) The measurement name has the form PEE.MinTemperature.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.3.3 Maximum Temperature
a) This measurement provides the maximum temperature.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clause 4.4.3.4, Annex A.
d) Each measurement is a real value in Degree Celsius (C°).
e) The measurement name has the form PEE.MaxTemperature.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.4 Voltage
a) This measurement provides the voltage.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – Clauses 4.4.3.3, 4.4.3.4, Annex B.
d) Each measurement is a real value in Volt (V).
e) The measurement name has the form PEE.Voltage.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.5 Current
a) This measurement provides the current.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – Clauses 4.4.3.3, 4.4.3.4, Annex B.
d) Each measurement is a real value in Ampere (A).
e) The measurement name has the form PEE.Current.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
5.1.6 Humidity
a) This measurement provides the percentage of humidity.
b) SI.
c) This measurement is obtained according to the method defined in ETSI ES 202 336-12 [22] – clause 4.4.3.3, Annex B.
d) Each measurement is a single integer value from 0 to 100.
e) The measurement name has the form PEE.Humidity.
f) ENBFunction, RNCFunction.
g) Valid for packet switching.
h) UMTS.
Annex A (informative):
Use cases for measurement report related measurements