4.38 Measurement report related measurements

32.4053GPPPerformance Management (PM)Performance measurementsRelease 17Telecommunication managementTSUniversal Terrestrial Radio Access Network (UTRAN)

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

4.38.1 P-CCPCH RSCP

This measurement provides Received Signal Code Power of serving cell P-CCPCH.
CC
Receipt by the RNC of MEASUREMENT REPORT message, IE Measured results includes Intra-frequency measured results list that includes Cell measured results that inlcudes Primary CCPCH RSCP info that includes Primary CCPCH RSCP. This measurement shall be increased for each reported value P-CCPCH RSCP_LEV. (See in 3GPP TS 25.331 [4])
Each measurement is an integer value.
MR.PccpchRscpLev.y y is an integer from 0 to 54.
Note:
0 of Lev indicates from P-CCPCH RSCP_LEV_00 to P-CCPCH RSCP_LEV_16, namely P-CCPCH RSCP < –100dBm,
1 of y indicates P-CCPCH RSCP_LEV_16, namely -100dBm  P-CCPCH RSCP < –99dBm,
…
53 of y indicates P-CCPCH RSCP_LEV_68, namely -48dBm  P-CCPCH RSCP < -47dBm.
54 of y indicates from P-CCPCH RSCP_LEV _69 to P-CCPCH RSCP_LEV _91, namely -47dBm  P-CCPCH RSCP. (See in 3GPP TS 25.123 [9])
UtranCellTDDLcr
UtranCellTDDHcr
Valid for circuit and packet switched traffic
UMTS

4.38.2 UTRAN RSCP

This measurement provides UTRAN RSCP.
CC
Receipt by the RNC of DEDICATED MEASUREMENT INITIATION RESPONSE message, IE Dedicated Measurement Value Information that includes Dedicated Measurement Value that includes RSCP.
This measurement shall be increased for each reported value RSCP_LEV. For every one or two or six RSCP_LEV(s) a separate measurement is defined. (See in 3GPP TS 25.433 [7])
Each measurement is an integer value.
MR.UtranRscpLev.Tsx.y x is an integer from 1 to 6 and only valid for uplink. y is an integer from 0 to 26.
Note:
0 of y indicates from RSCP_LEV _00 to RSCP_LEV _20, namely RSCP < -110dBm,
1 of y indicates RSCP_LEV _21 and RSCP_LEV _22, namely -110  RSCP < -109dBm,
2 of y indicates RSCP_LEV _23 and RSCP_LEV _24, namely -109  RSCP < -108dBm,
…
10 of y indicates RSCP_LEV _39, RSCP_LEV _40, namely -101  RSCP < -100dBm,
11 of y indicates RSCP_LEV _41, RSCP_LEV _42, namely -100  RSCP < -99dBm,
12 of y indicates RSCP_LEV _43, RSCP_LEV _48, namely -99  RSCP < -96dBm,
13 of y indicates from RSCP_LEV _49 to RSCP_LEV _54, namely -96  RSCP < -93dBm,
…
25 of y indicates from RSCP_LEV _121 to RSCP_LEV _126, namely -60  RSCP < -57dBm,
26 of y indicates RSCP_LEV _127, namely -57dBm  RSCP. (See in 3GPP TS25.123 [9])
UtranCellTDDLcr
UtranCellTDDHcr
Valid for circuit and packet switched traffic.
UMTS

4.38.3 UE timing advance

1. This measurement provides UE timing advance.
2. CC
3. Receipt by the RNC of MEASUREMENT REPORT message, IE Measured results includes UE internal measured results that inlcudes UE timing advance.
  This measurement shall be increased for each reported value TIMING_ADVANCE. For every four or eight TIMING_ADVANCEs a separate measurement is defined. (See in 3GPP TS 25.331 [4])
4. Each measurement is an integer value.
5. MR.UeTimingAdvance.y y is an integer from 0 to 36.
  Note:
  0 of y indicates from TIMING_ADVANCE_0000 to TIMING_ADVANCE_0003, namely 0 chip  Timing Advance < 0.5 chip,
  …
  7 of y indicates from TIMING_ADVANCE_0028 to TIMING_ADVANCE_0031, namely 3.5 chips  Timing Advance < 4 chips,
  8 of y indicates from TIMING_ADVANCE_0032 to TIMING_ADVANCE_0039, namely 4 chips  Timing Advance < 5 chips,
  …
  35 of y indicates from TIMING_ADVANCE_248 to TIMING_ADVANCE_0255, namely 31 chips  Timing Advance <32 chip,
  36 of y indicates from TIMING_ADVANCE_256 to TIMING_ADVANCE_2047, namely 32 chips  Timing
  (See in 3GPP TS 25.123 [9])
6. UtranCellTDDLcr
  UtranCellTDDHcr
7. Valid for circuit and packet switched traffic.
8. UMTS

4.38.4 UTRAN AOA value

1. This measurement provides UTRAN AOA value.
2. CC
3. Receipt by the RNC of DEDICATED MEASUREMENT INITIATION RESPONSE message, IE Dedicated Measurement Value Information that includes Dedicated Measurement Value that includes AOA value LCR.
  This measurement shall be increased for each reported value AOA_ANGLE. For every ten AOA_ANGLE(s) a separate measurement is defined. (See in 3GPP TS25.433 [7])
4. Each measurement is an integer value.
5. MR.UtranAOA.Tsx.y x is an integer from 1 to 6 and only valid for uplink. y is an integer from 0 to 71.
  Note: 0 of y indicates from AOA_ANGLE _000 to AOA_ANGLE _009, namely 0  AOA_ANGLE < 5 degree,
  …
  71 of y indicates from AOA_ANGLE _710 to AOA_ANGLE _719, namely 355  AOA_ANGLE < 360 degree. (See in 3GPP TS25.123 [9])
6. UtranCellTDDLcr
7. Valid for circuit and packet switched traffic.
8. UMTS

4.38.5 UE timeslot ISCP

1. This measurement provides UE timeslot ISCP.
2. CC
3. Receipt by the RNC of MEASUREMENT REPORT message, IE Measured results includes Intra-frequency measured results list that includes Cell measured results that inlcudes Timeslot ISCP.
  This measurement shall be increased for each reported value UE_TS_ISCP_LEV. For every one UE_TS_ISCP_LEV(s) that is less than 57 a separate measurement is defined. (See in 3GPP TS 25.331 [4])
4. Each measurement is an integer value.
5. MR.UeTimeslot IscpLev.TSx.y x is an integer from 1 to 6 and only valid for downlink. y is an integer from 0 to 46.
  Note:
  0 of y indicates UE_TS_ISCP_LEV_00, namely Timeslot_ISCP < –115dBm,
  1 of y indicates UE_TS_ISCP_LEV_01, namely -115dBm  Timeslot_ISCP < –114dBm
  …
  56 of y indicates UE_TS_ISCP_LEV_56, namely -60dBm  Timeslot_ISCP < –59dBm
  57 of y indicates from UE_TS_ISCP_LEV_57 to UE_TS_ISCP_LEV_91, namely -59dBm  Timeslot_ISCP. (See in 3GPP TS 25.123 [9])
6. UtranCellTDDLcr
  UtranCellTDDHcr
7. Valid for circuit and packet switched traffic.
8. UMTS

4.38.6 UTRAN timeslot ISCP

1. This measurement provides UTRAN timeslot ISCP of NodeB in uplink.
2. CC
3. Receipt by the RNC of COMMON MEASUREMENT REPORT message, IE Common Measurement Value Information that includes Dedicated Measurement Value Information that includes Dedicated Measurement Value that includes UL Timeslot ISCP.
  This measurement shall be increased for each reported value UTRAN_TS_ISCP_LEV. For every one or two UTRAN_TS_ISCP_LEV(s) a separate measurement is defined. (See in 3GPP TS 25.433 [7])
4. Each measurement is an integer value.
5. MR.UtranTimeslot Iscp.TSx.y x is an integer from 1 to 6 and only valid for uplink. y is an integer from 0 to 64.
  Note:
  0 of y indicates UTRAN_TS_ISCP_LEV_00, namely Timeslot_ISCP < –120dBm,
  1 of y indicates UTRAN_TS_ISCP_LEV_01 and UTRAN_TS_ISCP_LEV_02, namely -120dBm  Timeslot_ISCP < –119dBm
  2 of y indicates UTRAN_TS_ISCP_LEV_03 and UTRAN_TS_ISCP_LEV_04, namely -119dBm  Timeslot_ISCP < –118dBm
  …
  63 of y indicates UTRAN_TS_ISCP_LEV_125 and UTRAN_TS_ISCP_LEV_126, namely -58dBm  Timeslot_ISCP < –57dBm
  64 of y indicates UTRAN_TS_ISCP_LEV_127, namely -57  Timeslot_ISCP. (See in 3GPP TS 25.123 [9])
6. UtranCellTDDLcr
  UtranCellTDDHcr
7. Valid for circuit and packet switched traffic.
8. UMTS

4.38.7 UE transmitted power

1. This measurement provides UE transmitted power.
2. CC
3. Receipt by the RNC of MEASUREMENT REPORT message, IE Measured results includes UE internal measured results that inlcudes UE transmitted power.
  This measurement shall be increased for each reported value UE_TX_POWER. For every three UE_TX_POWERs a separate measurement is defined. (See in 3GPP TS 25.331 [4])
4. Each measurement is an integer value.
5. MR.UeTransmittedPower.TSx.y x is an integer from 1 to 6 and only valid for uplink. y is an integer from 0 to 27.
  Note:
  0 of y indicates UE_TX_POWER _021, UE_TX_POWER _022 and UE_TX_POWER _023, namely -50dBm  UE transmitted power < -47dBm,
  …
  27 of y indicates UE_TX_POWER _102, UE_TX_POWER _103 and UE_TX_POWER _104, namely 31dBm  UE transmitted power < 34dBm. (See in 3GPP TS 25.123 [9])
6. UtranCellTDDLcr
  UtranCellTDDHcr
7. Valid for circuit and packet switched traffic
8. UMTS

4.38.8 UpPTS interference

1. This measurement provides UpPTS interference of NodeB in downlink.
2. CC
3. Receipt by the RNC of COMMON MEASUREMENT REPORT message, IE Common Measurement Value Information includes Common Measurement Value that includes UpPCH interference.
  This measurement shall be increased for each reported value UTRAN_UPPTS_LEV. For every one or two UTRAN_UPPTS_LEV(s) a separate measurement is defined. (See in 3GPP TS 25.433 [7])
4. Each measurement is an integer value.
5. MR.UpptsInterferenceLev.y y is an integer from 0 to 64. (See in 3GPP TS 25.123 [9])
  Note:
  0 of y indicates UTRAN_UPPTS_LEV_00, namely UpPTS interference < -120dBm,
  1 of y indicates UTRAN_UPPTS_LEV_01 and UTRAN_UPPTS_LEV_02, namely -120dBm  UpPTS interference < -119dBm
  …
  63 of y indicates UTRAN_UPPTS_LEV _125 and UTRAN_UPPTS_LEV _126, namely -58dBm UpPTS interference < -57dBm,
  64 of y indicates UTRAN_UPPTS_LEV _127, namely -57dBm  UpPTS interference. (See in 3GPP TS 25.123 [9]).
6. UtranCellTDDLcr
7. Valid for circuit and packet switched traffic.
8. UMTS

4.38.9 UTRAN SIR

1. This measurement provides UTRAN SIR of NodeB for uplink.
2. CC
3. Receipt by the RNC of DEDICATED MEASUREMENT REPORT message, IE Dedicated Measurement Value includes SIR Value.
  This measurement shall be increased for each reported value UTRAN_SIR. For every one UTRAN_SIR a separate measurement is defined. (See in 3GPP TS 25.433 [7] and TS 25.123 [9])
4. Each measurement is an integer value.
5. MR.UtranSir. x x is an integer from 0 to 63.
  Note:
  0 of x indicates UTRAN_SIR_00, namely SIR < –11.0dB,
  1 of x indicates UTRAN_SIR_01, namely –11.0dB  SIR < –10.5dB
  2 of x indicates UTRAN_SIR_02, namely –10.5dB  SIR < –10.0dB
  …
  61 of x indicates UTRAN_SIR_61, namely 19dB SIR <19.5dB
  62 of x indicates UTRAN_SIR_62, namely 19.5dB  SIR<20.0dB

63 of x indicates UTRAN_SIR_63, namely 20.0dB  SIR

(See in 3GPP TS 25.123 [9])

1. UtranCellTDD
2. Valid for circuit and packet switched traffic.
3. UMTS

4.38.10 UE SIR

1. This measurement provides UE SIR for downlink.
2. CC
3. Receipt by the RNC of MEASUREMENT REPORT message, Measured results IE includes Quality measured results list IE that inlcudes SIR.
  This measurement shall be increased for each reported value UE_SIR. For every one UE_SIR a separate measurement is defined. (See in 3GPP TS 25.331 [4])
4. Each measurement is an integer value.
5. MR.UeSir. x x is an integer from 0 to 63.
  Note:
  0 of x indicates UE_SIR_00, namely SIR < –11.0dB,
  1 of x indicates UE_SIR_01, namely –11.0dB  SIR < –10.5dB
  2 of x indicates UE_SIR_02, namely –10.5dB  SIR < –10.0dB
  …
  61 of x indicates UE_SIR_61, namely 19dB SIR <19.5dB
  62 of x indicates UE_SIR_62, namely 19.5dB  SIR<20.0dB

63 of x indicates UE_SIR_63, namely 20.0dB  SIR

(See in 3GPP TS 25.123 [9])

1. UtranCellTDD
2. Valid for circuit and packet switched traffic.
3. UMTS

4.38.11 SIR Target

1. This measurement provides target value of SIR.
2. CC
3. Receipt by the RNC of DEDICATED MEASUREMENT REPORT message, IE Dedicated Measurement Value includes SIR Value.
  This measurement shall be increased for each reported value “UL SIR target”. For every three, four or five UL_SIR_TARGETs a separate measurement is defined. (See in 3GPP TS 25.433 [7])
4. Each measurement is an integer value.

MR.UtranSirt. x x is an integer from 0 to 51.
Note:
0 of x indicates from UL_SIR_TARGET _00 to UL_SIR_Target_02, namely UTRAN_SIRT < –8.0dB,
1 of x indicates from UL_SIR_TARGET_03 to UL_SIR_TARGET_07, namely –8.0dB  UTRAN_SIRT < –7.5dB

…
50 of x indicates from UL_SIR_TARGET_247 to UL_SIR_TARGET_251, namely 16.5dB  UTRAN_SIRT <17.0dB
51 of x indicates from UL_SIR_TARGET_252 to UL_SIR_TARGET_255, namely 17.0dB  UTRAN_SIRT (See in 3GPP TS 25.433 [7])

1. UtranCellTDD
2. Valid for circuit and packet switched traffic.
3. UMTS

4.38.12 Uplink Bit Error Rate for AMR 12.2K

a) This measurement provides uplink BER (Bit Error Rate) for AMR 12.2K.

b) CC

c) Receipt by the RNC of DEDICATED MEASUREMENT REPORT message, IE Dedicated Measurement Type includes Transport channel BER IE.
This measurement shall be increased for each reported value TrCh_BER_LOG. (See in 3GPP TS 25.433 [7] and TS 25.123 [9])

d) Each measurement is an integer value.

e) MR.CsVoiceUlBerLog. x x is an integer from 0 to 10.

Note:
0 of x indicates from TRCH_BER_LOG_000 to TRCH_BER_LOG_018, namely Log10(Transport channel BLER)< -1.9175,
1 of x indicates from TRCH_BER_LOG_019 to TRCH_BER_LOG_033, namely -1.925625  Log10(Transport channel BLER) <-1.80375,
2 of x indicates from TRCH_BER_LOG_034 and TRCH_BER_LOG_055, namely -1.80375  Log10(Transport channel BLER)< -1.625,
3 of x indicates from TRCH_BER_LOG_056 and TRCH_BER_LOG_071, namely -1.625  Log10(Transport channel BLER)< -1.495,
4 of x indicates from TRCH_BER_LOG_072 to TRCH_BER_LOG_092, namely -1.495 Log10(Transport channel BLER)< -1.324375,
5 of x indicates from TRCH_BER_LOG_093 and TRCH_BER_LOG_108, namely -1.324375  Log10(Transport channel BLER)< -1.194375,
6 of x indicates from TRCH_BER_LOG_109 to TRCH_BER_LOG_129, namely -1.194375 Log10(Transport channel BLER)< -1.02375,
7 of x indicates from TRCH_BER_LOG_130 and TRCH_BER_LOG_145, namely -1.02375 Log10(Transport channel BLER)< -0.89375,
8 of x indicates from TRCH_BER_LOG_146 and TRCH_BER_LOG_182, namely -0.89375 Log10(Transport channel BLER)< -0.593125,
9 of x indicates from TRCH_BER_LOG_183 and TRCH_BER_LOG_219, namely -0.593125 Log10(Transport channel BLER)< -0.2925,
10 of x indicates from TRCH_BER_LOG_220 to TRCH_BER_LOG_225, namely -0.2925 Log10(Transport channel BLER) 0

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

h) UMTS

4.38.13 Uplink Bit Error Rate for CS 64K

a) This measurement provides uplink BER (Bit Error Rate) for CS 64K.

b) CC

d) Each measurement is an integer value.

e) MR.Cs64UlBerLog. x x is an integer from 0 to 10.

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

h) UMTS

4.38.14 Uplink Bit Error Rate for PS

a) This measurement provides uplink BER (Bit Error Rate) for PS.

b) CC

d) Each measurement is an integer value.

e) MR.PsUlBerLog. x x is an integer from 0 to 10.

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

h) UMTS

4.38.15 Downlink BLER for AMR 12.2K

a) This measurement provides downlink BLER for AMR 12.2K.

b) CC

c) Receipt by the RNC of MEASUREMENT REPORT message, Measured results IE includes Quality measured results list IE that inlcudes DL Transport Channel BLER.
This measurement shall be increased for each reported value BLER_LOG. For every two or three or eight BLER_LOGs that is less than 63 a separate measurement is defined. (See in 3GPP TS 25.331 [4])

d) Each measurement is an integer value.

e) MR.CsVoiceDlBlerLog. x x is an integer from 0 to 19.

Note:
0 of x indicates from BLER_LOG_00 to BLER_LOG_07, namely Log10(Transport channel BLER)<-3.64,
1 of x indicates from BLER_LOG_08 to BLER_LOG_12, namely -3.64 Log10(Transport channel BLER)<-3.315,
2 of x indicates from BLER_LOG_13 and BLER_LOG_14, namely -3.315 Log10(Transport channel BLER)<-3.185,
3 of x indicates from BLER_LOG_15 and BLER_LOG_16, namely -3.185 Log10(Transport channel BLER)<-3.055,
4 of x indicates from BLER_LOG_17 to BLER_LOG_19, namely -3.055 Log10(Transport channel BLER)<-2.86,
5 of x indicates from BLER_LOG_20 and BLER_LOG_21, namely -2.86 Log10(Transport channel BLER)<-2.73,
6 of x indicates from BLER_LOG_22 to BLER_LOG_24, namely -2.73 Log10(Transport channel BLER)<-2.535,
7 of x indicates from BLER_LOG_25 and BLER_LOG_26, namely -2.535 Log10(Transport channel BLER)<-2.405,
8 of x indicates from BLER_LOG_27 and BLER_LOG_28, namely -2.405 Log10(Transport channel BLER)<-2.275,
9 of x indicates from BLER_LOG_29 and BLER_LOG_30, namely -2.275 Log10(Transport channel BLER)<-2.145,
10 of x indicates from BLER_LOG_31 to BLER_LOG_33, namely -2.145 Log10(Transport channel BLER)<-1.95,
11 of x indicates from BLER_LOG_34 and BLER_LOG_35, namely-1.95 Log10(Transport channel BLER)< -1.82,
12 of x indicates from BLER_LOG_36 to BLER_LOG_38, namely -1.82 Log10(Transport channel BLER)< -1.625,
13 of x indicates from BLER_LOG_39 and BLER_LOG_40, namely -1.625 Log10(Transport channel BLER)< -1.495,
14 of x indicates from BLER_LOG_41 and BLER_LOG_42, namely -1.495 Log10(Transport channel BLER)<-1.365,
15 of x indicates from BLER_LOG_43 and BLER_LOG_44, namely -1.365 Log10(Transport channel BLER)< -1.235,
16 of x indicates from BLER_LOG_45 to BLER_LOG_47, namely -1.235  Log10(Transport channel BLER)< -1.04,
17 of x indicates from BLER_LOG_48 and BLER_LOG_49, namely -1.04 Log10(Transport channel BLER)< -0.91,
18 of x indicates from BLER_LOG_50 to BLER_LOG_53, namely -0.91 Log10(Transport channel BLER)< -0.65,
19 of x indicates from BLER_LOG_54 to BLER_LOG_63, namely -0.65 Log10(Transport channel BLER) 0

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

h) UMTS

4.38.16 Downlink BLER for CS 64K

a) This measurement provides downlink BLER for CS 64K.

b) CC

d) Each measurement is an integer value.

e) MR.Cs64DlBlerLog. x x is an integer from 0 to 19.

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

h) UMTS

4.38.17 Downlink BLER for PS

a) This measurement provides downlink BLER for PS.

b) CC

d) Each measurement is an integer value.

e) MR.PsDlBlerLog. x x is an integer from 0 to 19.

f) UtranCellTDD

g) Valid for circuit and packet switched traffic.

g) UMTS