4.36 MBMS related measurements

32.4053GPPPerformance Management (PM)Performance measurementsRelease 17Telecommunication managementTSUniversal Terrestrial Radio Access Network (UTRAN)

4.36.1 Number of octets of MBMS data on MAC layer

a) This measurement provides the number of octets of MBMS data on MAC-m layer.

b) CC

c) On transmission by the RNC of a PDU on the MAC layer for MBMS. The number of octets of MAC layer for MBMS is calculated by sum of PDU size including PDU header.

d) A single integer value.

e) MBMS.NbrOctMac

f) UtranCellFDD
UtranCellTDDLcr
UtranCellTDDHcr

g) Valid for packet switched traffic

h) UMTS

4.36.2 Session related measurements

4.36.2.1 Attempted MBMS session start

a) This measurement provides the number of attempted MBMS session start.

b) CC

c) On receipt by the RNC of a MBMS SESSION START message from CN (see TS 25.413 [5]), each MBMS SESSION START message is added to the measurement when MBMS resources attempt to be established in relevant cell.

d) A single integer value.

e) MBMS.AttSessionStart

f) UtranCellFDD
UtranCellTDDLcr
UtranCellTDDHcr

g) Valid for packet switched traffic.

h) UMTS

4.36.2.2 Successful MBMS session start

  1. This measurement provides the number of successful MBMS session start.
  2. CC
  3. Transmission by the RNC of a MBMS SESSION START RESPONSE message to CN (see TS 25.413 [5]), each MBMS SESSION START RESPONSE message is added to the measurement when MBMS resources have been established in relevant cell.
  4. A single integer value.
  5. MBMS.SuccSessionStart
  6. UtranCellFDD
    UtranCellTDDLcr
    UtranCellTDDHcr
  7. Valid for packet switched traffic.
  8. UMTS

4.36.2.3 Attempted MBMS session stop

  1. This measurement provides the number of attempted MBMS session stop.
  2. CC
  3. On receipt by the RNC of a MBMS SESSION STOP message from CN (see TS 25.413 [5]), each MBMS SESSION STOP message is added to the measurement when MBMS resources attempt to be released in relevant cell.
  4. A single integer value.
  5. MBMS.AttSessionStop
  6. UtranCellFDD
    UtranCellTDDLcr
    UtranCellTDDHcr
  7. Valid for packet switched traffic.
  8. UMTS

4.36.2.4 Successful MBMS session stop

  1. This measurement provides the number of successful MBMS session stop.
  2. CC
  3. Transmission by the RNC of a MBMS SESSION STOP RESPONSE message to CN (see TS 25.413 [5]) , each MBMS SESSION STOP RESPONSE message is added to the measurement when MBMS resources have been released in relevant cell,
  4. A single integer value.
  5. MBMS.SuccSessionStop
  6. UtranCellFDD
    UtranCellTDDLcr
    UtranCellTDDHcr
  7. Valid for packet switched traffic.
  8. UMTS