4.33 Measurements related to equipment resources

32.4053GPPPerformance Management (PM)Performance measurementsRelease 17Telecommunication managementTSUniversal Terrestrial Radio Access Network (UTRAN)

4.33.1 RNC Processor usage

4.33.1.1 Mean processor usage

  1. This measurement provides the mean usage of each key processor during the granularity period. Each equipment may have more than one key processors, the measurement is split into subcounters per key processor.
  2. SI.
  3. This measurement is obtained by sampling at a pre-defined interval the usage of the processor and then taking the arithmetic mean for each key processor.
  4. Each measurement is an integer value (Unit: %).
  5. The measurement name has the form EQPT.MeanProcessorUsage.ProcessorID
    where ProcessorID identifies the key processor of this equipment, the format of ProcessorID is vendor specific.
  6. ManagedElement.
  7. Valid for circuit switched and packet switched traffic.

h) UMTS.

4.33.1.2 Peak processor usage

  1. This measurement provides the peak usage of each key processor during the granularity period. Each equipment may have more than one key processors, the measurement is split into subcounters per key processor.
  2. SI.
  3. This measurement is obtained by sampling at a pre-defined interval the usage of the processor and then taking the maximum for each key processor.
  4. Each measurement is an integer value (Unit: %).
  5. The measurement name has the form EQPT.PeakProcessorUsage.ProcessorID
    where ProcessorID identifies the key processor of this equipment, the format of ProcessorID is vendor specific.
  6. ManagedElement.
  7. Valid for circuit switched and packet switched traffic.

h) UMTS.