4.32 Measurements related to received uplink transport block

32.4053GPPPerformance Management (PM)Performance measurementsRelease 17Telecommunication managementTSUniversal Terrestrial Radio Access Network (UTRAN)

4.32.1 Measurements related to received uplink transport block for CS domain

4.32.1.1 Number of received uplink transport blocks of DCH for CS domain

1. This measurement provides the number of received uplink transport blocks of DCH during the period of measurement for the CS domain. In case of soft handover, this measurement is valid after combination, based on best UTRAN cell for FDD mode only.
2. CC.
3. On receipt by the RNC of an uplink transport block of DCH from UE for CS domain. For conversational service, the relevant measurement for each specified data rate is required. The detailed data rates are listed below (see TS 25.993 [12]).
   uplink <U>:
   1: AMR rate (12.2 10.2 7.95 7.4 6.7 5.9 5.15 4.75) kbps
   2: 12.2 kbps
   3: 28.8 kbps
   4: 32 kbps
   5: 64 kbps
   As indicated above <U> maps to the conversational service specified uplink data rates.
4. A single integer value.
5. FP.NbrBlocksReceivedCS.Conv.<U>
   FP.NbrBlocksReceivedCS.Strm
   FP.NbrBlocksReceivedCS.Intact
   FP.NbrBlocksReceivedCS.Bgrd
6. UtranCellFDD
   UtranCellTDDLcr
   UtranCellTDDHcr
7. Valid for circuit switched traffic.
8. UMTS.

4.32.1.2 Number of received uplink faulty transport blocks of DCH for CS domain

1. This measurement provides the number of received uplink faulty transport blocks of DCH during the period of measurement for CS domain. In case of soft handover, this measurement is valid after combination, based on best UTRAN cell for FDD mode only.
2. CC.
3. On receipt by the RNC of an uplink faulty transport block using CRC indicator (see TS 25.427[17]) of DCH from UE for CS domain. For conversational service, the relevant measurement for each specified data rate is required. The detailed data rates are listed below (see TS 25.993 [12]).
   uplink <U>:
   1: AMR rate (12.2 10.2 7.95 7.4 6.7 5.9 5.15 4.75) kbps
   2: 12.2 kbps
   3: 28.8 kbps
   4: 32 kbps
   5: 64 kbps
   As indicated above <U> maps to the conversational service specified uplink data rates.
4. A single integer value.
5. FP.NbrErrBlocksReceivedCS.Conv.<U>
   FP.NbrErrBlocksReceivedCS.Strm
   FP.NbrErrBlocksReceivedCS.Intact
   FP.NbrErrBlocksReceivedCS.Bgrd
6. UtranCellFDD
   UtranCellTDDLcr
   UtranCellTDDHcr
7. Valid for circuit switched traffic.
8. UMTS.

4.32.2 Measurements related to received uplink transport block for PS domain

4.32.2.1 Number of received uplink transport blocks of DCH for PS domain

1. This measurement provides the number of received uplink transport blocks of DCH during the period of measurement for PS domain. In case of soft handover, this measurement is valid after combination, based on best UTRAN cell for FDD mode only.
2. CC.
3. On receipt by the RNC of an uplink transport block of DCH from UE for PS domain. For conversational service, the relevant measurement for each specified data rate is required. The detailed data rates are listed below (see TS 25.993 [12]).
   uplink <U>:
   1: AMR rate (12.2 10.2 7.95 7.4 6.7 5.9 5.15 4.75) kbps
   2: 12.2 kbps
   3: 28.8 kbps
   4: 32 kbps
   5: 64 kbps
   As indicated above <U> maps to the conversational service specified uplink data rates.
4. A single integer value.
5. FP.NbrBlocksReceivedPS.Conv.<U>
   FP.NbrBlocksReceivedPS.Strm
   FP.NbrBlocksReceivedPS.Intact
   FP.NbrBlocksReceivedPS.Bgrd
6. UtranCellFDD
   UtranCellTDDLcr
   UtranCellTDDHcr
7. Valid for packet switched traffic.
8. UMTS.

4.32.2.2 Number of received uplink faulty transport blocks of DCH for PS domain

1. This measurement provides the number of received uplink faulty transport blocks of DCH during the period of measurement for PS domain. In case of soft handover, this measurement is valid after combination, based on best UTRAN cell for FDD mode only.
2. CC.
3. On receipt by the RNC of an uplink faulty transport block using CRC indicator (see TS 25.427[17]) of DCH from UE for PS domain. For conversational service, the relevant measurement for each specified data rate is required. The detailed data rates are listed below (see TS 25.993 [12]).
   uplink <U>:
   1: AMR rate (12.2 10.2 7.95 7.4 6.7 5.9 5.15 4.75) kbps
   2: 12.2 kbps
   3: 28.8 kbps
   4: 32 kbps
   5: 64 kbps
   As indicated above <U> maps to the conversational service specified uplink data rates.
4. A single integer value.
5. FP.NbrErrBlocksReceivedPS.Conv.<U>
   FP.NbrErrBlocksReceivedPS.Strm
   FP.NbrErrBlocksReceivedPS.Intact
   FP.NbrErrBlocksReceivedPS.Bgrd
6. UtranCellFDD
   UtranCellTDDLcr
   UtranCellTDDHcr
7. Valid for packet switched traffic.
8. UMTS.