5.1.1 Generic CDR parameters
32.2983GPPCharging Data Record (CDR) parameter descriptionCharging managementRelease 18Telecommunication managementTS
5.1.1.0 Introduction
This subclause contains the description of generic CDR parameters, where the term "generic" implies that these parameters are applicable to CDR types of more than one domain/service/subsystem.
5.1.1.1.0A 3GPP PS Data Off Status
This field holds the Status of UE’s 3GPP PS Data Off.
5.1.1.1.0B Data volume octets
This field includes the number of octet transmitted during the use of data services.
5.1.1.1 Serving Network Identity
This field contains a SGSN PLMN Identifier (Mobile Country Code and Mobile Network Code), of the SGSN that was used during the Location request. In case the SGSN changes during the transaction, only the ID of the SGSN that was used at the beginning of the transaction is included in the CDR.
The MCC and MNC are coded as described for ‘Routing Area Identity’ in TS 29.060 [215].
5.1.1.2 Service Context Id
This field contains the Service Context Id from Diameter Accounting, if Diameter Accounting was used and the field included. It identifies the service, sub-system or domain and release that the CDR is applicable to. The contents are described in TS 32.299 [50].
5.1.1.3 Subscription Identifier
This field identifies the charged party . The contents are coded in a similar fashion as for the Subscription-Id AVP in TS 32.299 [50] if applicable.
This field may hold the 5G Subscription Permanent Identifier (SUPI) of the served party (e.g., IMSI, NAI, GLI, GCI) as specified in TS 29.571 [249], if applicable.
5.1.1.4 Service Specific Info
This grouped field holds the sub-fields "service specific data" and "service specific type" if and as provided by an Application Server or PCEF only for pre-defined PCC rules or TDF only for pre-defined ADC rules.
5.1.1.5 Service Specific Type
This field holds the type of the Service Specific Data parameter.
5.1.1.6 Service Specific Data
This field contains the value of service specific data.
5.1.1.7 Subscriber Equipment Number
The Subscriber Equipment Number field contains the identification of the User Equipment (UE) accessing the 3GPP system.
5.1.1.8 PSCell Information
This field contains the primary of Secondary Cell Group (SCG)) cell information associated to the Secondary RAT when dual connectivity is supported.