5 Testing methodology in general

31.1243GPPMobile Equipment (ME) conformance test specificationRelease 16TSUniversal Subscriber Identity Module Application Toolkit (USAT) conformance test specification

When possible the present document refers to ETSI TS 102 384 [26] to describe generic aspects of application toolkit tests.

5.1 Testing of optional functions and procedures

Any function or procedure which is optional, as indicated in the present document, may be subject to a conformance test if it is implemented in the ME.

5.2 Test interfaces and facilities

The UICC and NG-SS/NB-SS/E-USS/USS/SS interfaces provide the main test interfaces for the purpose of performing conformance tests.

The tests which require a network simulator shall be carried out with using a Next Generation System Simulator when accessing a NG-RAN, a NB System Simulator when accessing an E-UTRAN in NB-S1 mode, an Evolved Universal System Simulator when accessing an E-UTRAN in WB-S1 mode, a Universal System Simulator when accessing a UTRAN, and if these tests have to be performed additionally when accessing a GERAN a System Simulator shall be used instead.

5.3 Information to be provided by the apparatus supplier

The information to be provided by the apparatus supplier specified in TS 38.508-1 [39], TS 36.523-2 [34], TS 36.508 [33], TS 34.108 [12] and TS 51.010-1 [23] shall apply, unless otherwise specified in the present clause.

In addition, the apparatus supplier shall provide the information with respect to the Supported Option table A.1 and to ME’s default configuration table A.2.

Table A.2: ME’s default configuration

Item

Description

Value

Status

1

DISPLAY TEXT: No Response from user timeout interval

C

2

GET INKEY: No response from user Timeout interval

C

3

GET INPUT: No response from user Timeout interval

C

4

SELECT ITEM: No response from user Timeout interval

C

5

DISPLAY TEXT Text Attributes Alignment [Left or Center or Right]

C

6

GET INKEY Text Attributes Alignment [Left or Center or Right]

C

7

GET IMPUT Text Attributes Alignment [Left or Center or Right]

C

8

PLAY TONE Text Attributes Alignment [Left or Center or Right]

C

9

SET UP MENU Text Attributes Alignment [Left or Center or Right]

C

10

SELECT ITEM Text Attributes Alignment [Left or Center or Right]

C

11

SEND SHORT MESSAGE Text Attributes Alignment [Left or Center or Right]

C

12

SEND SS Text Attributes Alignment [Left or Center or Right]

C

13

SEND USSD Text Attributes Alignment [Left or Center or Right]

C

14

SET UP CALL Text Attributes Alignment [Left or Center or Right]

C

15

SET UP IDLE MODE TEXT Text Attributes Alignment [Left or Center or Right]

C

16

RUN AT Text Attributes Alignment [Left or Center or Right]

C

17

SEND DTMF Text Attributes Alignment [Left or Center or Right]

C

18

LAUNCH BROWSER Text Attributes Alignment [Left or Center or Right]

C

19

OPEN CHANNEL Text Attributes Alignment [Left or Center or Right]

C

20

CLOSE CHANNEL Text Attributes Alignment [Left or Center or Right]

C

21

RECEIVE DATA Text Attributes Alignment [Left or Center or Right]

C

22

SEND DATA Text Attributes Alignment [Left or Center or Right]

C

23

IMEI

M

24

IMEISV

C

25

[Reserved]

26

Additional Card Reader Id

C

27

Channel Id

C

28

Manufacturer identification as implemented according to TS 27.007, cl. 5.1

C

29

Preferred buffer size supported by the terminal for Open Channel command

C

Note: Conditional values shall be provided if the corresponding option is supported in the table A.1