27.22.14 ENVELOPE SMS-PP Data Download on NAS messages

31.1243GPPMobile Equipment (ME) conformance test specificationRelease 16TSUniversal Subscriber Identity Module Application Toolkit (USAT) conformance test specification

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

27.22.14.1 Routing Indicator Data update via DL NAS TRANSPORT messages

27.22.14.1.1 Definition and applicability

See clause 3.2.2.

27.22.14.1.2 Conformance requirement

The ME shall support the Proactive UICC: SMS-PP Data Download facility as defined in the following technical specifications:

– 3GPP TS 31.111 [15] clause 5, clause 7.1, clause 8.1, clause 8.7, clause 8.13 and clause 11.

– 3GPP TS 31.115 [28] clause 4.

– 3GPP TS 23.038 [7] clause 4.

The ME shall support the Procedure for SMS-PP data download via DL NAS TRANSPORT messages as defined in the following technical specifications:

– 3GPP TS 31.111 [15] clause 7.1.1.1a.

27.22.14.1.3 Test purpose

To verify that when:

– the service "data download via SMS Point-to-point" is available in the USIM Service Table

and

– the ME receives a DL NAS TRANSPORT message that includes

– a UE parameters update transparent container containing a UE parameters update data set with UE parameters update data set type with value "1"=Routing Indicator update data

– containing a secure packet constructed as an SMS-Deliver (as specified in 3GPP TS 23.040 [5]) with:

– protocol identifier = SIM data download; and

– data coding scheme = class 2 message

– and the integrity check of the message was successful

then

– the ME shall

– pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as defined in TS 31.111 [15] clause 7.1.1.2

– the ME shall not display or alert the user

– the secure packet is coded as a Command Packet formatted as Short Message Point to Point (as specified in 3GPP TS 31.115 [28]).

To verify that the ME interprets the UICC returns response correctly.

27.22.14.1.4 Method of Test

27.22.14.1.4.1 Initial conditions

The ME is connected to the USIM Simulator and the NG-SS.

The ME is connected to NG-SS and it has performed the Registration procedure.

The default NG-RAN UICC and the following parameters.

The NG-RAN UICC parameters are:

one OTA Key Set with:

Key Version: 01

1^st key

Key Index (Kic): 01

Key value: 000102030405060708090A0B0C0D0E0F

2^nd key

Key Index (Kid): 02

Key value: 000102030405060708090A0B0C0D0E0F

3^rd key

Key Index (Kik): 03

Key value: 000102030405060708090A0B0C0D0E0F

The default NG-RAN parameters and the following parameters are used:

The NG-RAN parameters of the system simulator are:

– Mobile Country Code (MCC) = 001;

– Mobile Network Code (MNC) = 01;

– Tracking Area Code (TAC) = 000001;

– NG-RAN Cell Id = 0001 (36 bits).

The elementary files are coded as USIM Application Toolkit default with the following exceptions:

– The "data download via SMS Point-to-point" service is available in the USIM Service Table.

Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.

27.22.14.1.4.2 Procedure

Expected Sequence 1.1 (SMS-PP Data Download after UE parameters update data (Routing Indicator Data) via DL NAS TRANSPORT message "acknowledgement not requested" and "re-registration not requested")

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT message 1.1.1 with acknowledgement not requested re-registration not requested	UE parameters update header with: ACK set to "acknowledgement not requested" REG set to "re-registration not requested"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 1.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	UICC	EF_{Routing_Indicator} contents updated correctly	New EF_{Routing_Indicator} value "00550000"
7	ME→ UICC	FETCH
8	UICC → ME	PROACTIVE COMMAND: REFRESH 1.1.1 [File Change Notification]
9	ME→ UICC	TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B
10	UICC→ ME	PROACTIVE UICC SESSION ENDED
11	NG-SS → ME	NG-SS shall send IDENTITY REQUEST for SUCI and verify if UE sends SUCI with newly updated Routing Indicator.

DL NAS TRANSPORT message 1.1.1

Logically:

Message details (referring to 3GPP TS 24.501 Table 9.11.3.53A.1)

Payload container type IE: "0110" (UE parameters update transparent container)

UE parameters update header:

UPU data type: "0" (UE parameters update transparent container carries a UE parameters update list)

ACK: "0" (acknowledgment not requested)

REG: "0" (re-registration not requested)

UE parameters update list: includes one UE parameters update data set with UE parameters update data set type "0001" (Routing indicator update data)

Corresponding UE parameters update data set:

Secured packet: as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	0F	13	8E	84
E8	D6	F8	01	AA	31	22	07	00	A4	00	04
02	5F	C0	22	07	00	A4	00	04	02	4F	0A
22	07	00	D6	00	00	02	00	55	81	14	81
03	01	01	01	82	02	81	82	12	09	01	3F
00	7F	FF	5F	C0	4F	0A

ENVELOPE: SMS-PP DOWNLOAD 1.1.1

Logically:

SMS-PP Download:

Device identities:

Source device: Network

Destination device: UICC

SMS TPDU: Contents of Secured Packet from DL NAS TRANSPORT message 1.1.1

Coding:

BER-TLV:	D1	61	82	02	83	81	8B	5B	40	00	91	7F
	F6	00	00	00	00	00	00	00	4E	02	70	00
	00	49	15	02	00	10	10	B0	01	40	00	00
	00	00	00	00	0F	13	8E	84	E8	D6	F8	01
	AA	31	22	07	00	A4	00	04	02	5F	C0	22
	07	00	A4	00	04	02	4F	0A	22	07	00	D6
	00	00	02	00	55	81	14	81	03	01	01	01
	82	02	81	82	12	09	01	3F	00	7F	FF	5F
	C0	4F	0A

PROACTIVE COMMAND: REFRESH 1.1.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: File Change Notification

Device identities

Source device: UICC

Destination device: ME

File List: EF_{Routing_Indicator}

Coding:

BER-TLV:	D0	14	81	03	01	01	01	82	02	81	82	12
	09	01	3F	00	7F	FF	5F	C0	4F	0A

TERMINAL RESPONSE: REFRESH 1.1.1A

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: File Change Notification

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Coding:

BER-TLV:

TERMINAL RESPONSE: REFRESH 1.1.1B

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: File Change Notification

Device identities

Source device: ME

Destination device: UICC

Result

General Result: REFRESH performed with additional EFs read

Coding:

BER-TLV:

Expected Sequence 1.2 (SMS-PP Data Download after UE parameters update data (Routing Indicator Data) via DL NAS TRANSPORT message "acknowledgement not requested" and "re-registration requested")

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT message 1.2.1 with acknowledgement not requested re-registration requested	UE parameters update header with: ACK set to "acknowledgement not requested" REG set to "re-registration requested"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 1.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	UICC	EF_{Routing_Indicator} contents updated correctly	New EF_{Routing_Indicator} value "00550000"
7	ME→ UICC	FETCH
8	UICC → ME	PROACTIVE COMMAND: REFRESH 1.1.1 [File Change Notification]
9	ME→ UICC	TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B
10	UICC → ME	PROACTIVE UICC SESSION ENDED
11	ME	Enter in 5GMM-IDLE	NG-SS shall send RRC Release
12	ME	ME performs a de-registration procedure, delete its 5G-GUTI and initiate a registration procedure for initial registration Verify if UE sends SUCI with newly updated Routing Indicator in the REGISTRATION REQUEST.	As specified in TS 24.501 [40] clause 5.4.5.3.3 clause i.1.i.C1

DL NAS TRANSPORT message 1.2.1

Logically:

Message details (referring to 3GPP TS 24.501 Table 9.11.3.53A.1)

Payload container type IE: "0110" (UE parameters update transparent container)

UE parameters update header:

UPU data type: "0" (UE parameters update transparent container carries a UE parameters update list)

ACK: "0" (acknowledgment not requested)

REG: "1" (re-registration requested)

UE parameters update list: includes one UE parameters update data set with UE parameters update data set type "0001" (Routing indicator update data)

Corresponding UE parameters update data set:

Secured packet: as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	0F	13	8E	84
E8	D6	F8	01	AA	31	22	07	00	A4	00	04
02	5F	C0	22	07	00	A4	00	04	02	4F	0A
22	07	00	D6	00	00	02	00	55	81	14	81
03	01	01	01	82	02	81	82	12	09	01	3F
00	7F	FF	5F	C0	4F	0A

Expected Sequence 1.3 (SMS-PP Data Download after UE parameters update data (Routing Indicator Data) via DL NAS TRANSPORT message "acknowledgement requested" and "re-registration requested")

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT message 1.3.1 with acknowledgement requested re-registration requested	UE parameters update header with: ACK set to "acknowledgement requested" REG set to "re-registration requested"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 1.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	ME → NG-SS	ME sends to NG-SS an acknowledgement in the Payload container IE of an UL NAS TRANSPORT message with Payload type IE set to "UE parameters update transparent container".	Note 1: this step can be performed in parallel or after step 8.
7	UICC	EF_{Routing_Indicator} contents updated correctly	New EF_{Routing_Indicator} value "00550000"
8	ME→ UICC	FETCH
9	UICC → ME	PROACTIVE COMMAND: REFRESH 1.1.1 [File Change Notification]
10	ME→ UICC	TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B	ME shall have sent by now an acknowledgement in the Payload container IE of an UL NAS TRANSPORT message as specified in TS 24.501 [40] clause 5.4.5.3.3 clause i.1.i.B
11	UICC → ME	PROACTIVE UICC SESSION ENDED
12	ME	Enter in 5GMM-IDLE	NG-SS shall send RRC Release
13	ME	ME performs a de-registration procedure, delete its 5G-GUTI and initiate a registration procedure for initial registration Verify if UE sends SUCI with newly updated Routing Indicator in the REGISTRATION REQUEST.	As specified in TS 24.501 [40] clause 5.4.5.3.3 clause i.1.i.C1

DL NAS TRANSPORT message 1.3.1

Logically:

Message details (referring to 3GPP TS 24.501 Table 9.11.3.53A.1)

Payload container type IE: "0110" (UE parameters update transparent container)

UE parameters update header:

UPU data type: "0" (UE parameters update transparent container carries a UE parameters update list)

ACK: "1" (acknowledgment requested)

REG: "1" (re-registration requested)

UE parameters update list: includes one UE parameters update data set with UE parameters update data set type "0001" (Routing indicator update data)

Corresponding UE parameters update data set:

Secured packet: as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	0F	13	8E	84
E8	D6	F8	01	AA	31	22	07	00	A4	00	04
02	5F	C0	22	07	00	A4	00	04	02	4F	0A
22	07	00	D6	00	00	02	00	55	81	14	81
03	01	01	01	82	02	81	82	12	09	01	3F
00	7F	FF	5F	C0	4F	0A

Expected Sequence 1.4 (SMS-PP Data Download after UE parameters update data (Routing Indicator Data) via DL NAS TRANSPORT message "acknowledgement requested" and "re-registration not requested")

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT message 1.4.1 with acknowledgement requested re-registration not requested	UE parameters update header with: ACK set to "acknowledgement requested" REG set to "re-registration not requested"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 1.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	ME → NG-SS	ME sends to NG-SS an acknowledgement in the Payload container IE of an UL NAS TRANSPORT message with Payload type IE set to "UE parameters update transparent container".	Note 1: this step can be performed in parallel or after step 8.
7	UICC	EF_{Routing_Indicator} contents updated correctly	New EF_{Routing_Indicator} value "00550000"
8	ME→ UICC	FETCH
9	UICC → ME	PROACTIVE COMMAND: REFRESH 1.1.1 [File Change Notification]
10	ME→ UICC	TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B	ME shall have sent by now an acknowledgement in the Payload container IE of an UL NAS TRANSPORT message as specified in TS 24.501 [40] clause 5.4.5.3.3 clause i.1.i.B
11	UICC → ME	PROACTIVE UICC SESSION ENDED
12	NG-SS → ME	NG-SS shall send IDENTITY REQUEST for SUCI and verify if UE sends SUCI with newly updated Routing Indicator.

DL NAS TRANSPORT message 1.4.1

Logically:

Message details (referring to 3GPP TS 24.501 Table 9.11.3.53A.1)

Payload container type IE: "0110" (UE parameters update transparent container)

UE parameters update header:

UPU data type: "0" (UE parameters update transparent container carries a UE parameters update list)

ACK: "1" (acknowledgment requested)

REG: "0" (re-registration not requested)

UE parameters update list: includes one UE parameters update data set with UE parameters update data set type "0001" (Routing indicator update data)

Corresponding UE parameters update data set:

Secured packet: as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	0F	13	8E	84
E8	D6	F8	01	AA	31	22	07	00	A4	00	04
02	5F	C0	22	07	00	A4	00	04	02	4F	0A
22	07	00	D6	00	00	02	00	55	81	14	81
03	01	01	01	82	02	81	82	12	09	01	3F
00	7F	FF	5F	C0	4F	0A

27.22.14.1.5 Test requirement

The ME shall operate in the manner defined in expected sequences 1.1 to 1.4.

27.22.14.2 Steering of Roaming via DL NAS TRANSPORT message

27.22.14.2.1 Definition and applicability

See clause 3.2.2.

27.22.14.2.2 Conformance requirement

The ME shall support the Proactive UICC: SMS-PP Data Download facility as defined in the following technical specifications:

– 3GPP TS 31.111 [15] clause 5, clause 7.1, clause 8.1, clause 8.7, clause 8.13 and clause 11.

– 3GPP TS 31.115 [28] clause 4.

– 3GPP TS 23.038 [7] clause 4.

The ME shall support the Procedure for SMS-PP data download via DL NAS TRANSPORT messages as defined in the following technical specifications:

– 3GPP TS 31.111 [15] clause 7.1.1.1a.

The ME shall support the steering of roaming procedure as defined in:

– 3GPP TS 23.122 [29] clause 4.4.6.

27.22.14.2.3 Test purpose

To verify that when the service "data download via SMS Point-to-point" is available in the USIM Service Table and the ME receives a DL NAS TRANSPORT message that includes:

– a SOR transparent container information element with list type with value "0"= secured packet, containing a secured packet constructed as an SMS-Deliver (as specified in TS 23.040 [8]) with:

– protocol identifier = SIM data download;

– data coding scheme = class 2 message;

and the integrity check of the message was successful, then the ME shall:

– pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as defined in 3GPP TS 31.111 [15] clause 7.1.1.2;

– not display or alert the user.

Where the secured packet is coded as a Command Packet formatted as Short Message Point to Point (as specified in TS 31.115 [28]).

For sequence 2.1:

To verify that when the ME receives a USAT REFRESH command qualifier of type "Steering of Roaming", it (as specified in 3GPP TS 23.122 [29], clause 4.4.6):

– deletes formerly forbidden PLMNs provided as allowed in the REFRESH command from the Forbidden PLMN list and from the Forbidden PLMNs for GPRS service list. This includes any information stored in the UICC.

For sequence 2.3:

To verify that when ME receives a USAT REFRESH command qualifier of type "Steering of Roaming", it (as specified in 3GPP TS 23.122 [29], clause 4.4.6):

– replaces the highest priority entries in the "Operator Controlled PLMN Selector with Access Technology" list stored in the ME with the list provided in the REFRESH command;

Note: This requirement is implicitly verified when the ME attempts to obtain service on a higher priority PLMN.

– considers new information provided in subsequent attempts to access a higher priority PLMN;

and

– attempts to obtain service on a higher priority PLMN as specified in 3GPP TS 23.122 [29], clause 4.4.3.3 by acting as if timer T that controls periodic attempts has expired.

27.22.14.2.4 Method of Test

27.22.14.2.4.1 Initial conditions

The ME is connected to the USIM Simulator and the NG-SS.

The default NG-RAN UICC with the following exceptions is used:

EF_UST (USIM Service Table)

Logically:

Service n°42

Operator controlled PLMN selector with Access Technology

available

Coding:

Byte:	B1		B6		B16
Binary:	xxxx xxxx	…	xxxx xx1x	….	xxxx xxxx

The NG-RAN UICC parameters are:

– one OTA Key Set with:

Key Version: 01

1^st key

Key Index (Kic): 01

Key Algorithm: Triple DES

Key value: 000102030405060708090A0B0C0D0E0F

2^nd key

Key Index (Kid): 02

Key Algorithm: Triple DES

Key value: 000102030405060708090A0B0C0D0E0F

3^rd key

Key Index (Kik): 03

Key Algorithm: Triple DES

Key value: 000102030405060708090A0B0C0D0E0F

For sequences 2.1:

The NG-RAN parameters of the system simulator are:

Mobile Country Code (MCC) = 001;
Mobile Network Code (MNC) = 01;
Tracking Area Code (TAC) = 000001;
NG-RAN Cell Id = 0001 (36 bits).

For sequence 2.3:

EF_FPLMN

Logically:

PLMN1: 254 002 (MCC MNC)

PLMN2: 254 003

PLMN3: 254 004

PLMN4: 234 004

PLMN5: 234 005

PLMN6: 234 006

Coding:

Coding:	B1	B2	B3	B4	B5	B6	B7	B8	B9	B10	B11	B12
Hex	52	24	00	52	34	00	52	44	00	32	44	00
	B13	B14	B15	B16	B17	B18
	32	54	00	32	64	00

EF_OPLMNwACT:

Logically:

1^st PLMN: 254 001 (MCC MNC)

1^st ACT: NG-RAN

2^nd PLMN: 254 001

2^nd ACT: E-UTRAN

3^rd PLMN: 274 002

3^rd ACT: NG-RAN

4^th PLMN: 274 003

4^th ACT: E-UTRAN

5^th PLMN: 274 004

5^th ACT: E-UTRAN

6^th PLMN: 274 005

6^th ACT: E-UTRAN

7^th PLMN: 274 006

7^th ACT: E-UTRAN

8^th PLMN: 274 007

8^th ACT: UTRAN

Coding:

Coding:	B1	B2	B3	B4	B5	B6	B7	B8	B9	B10	B11	B12
Hex	52	14	00	08	00	52	14	00	40	00	72	24
	B13	B14	B15	B16	B17	B18	B19	B20	B21	B22	B23	B24
	00	08	00	72	34	00	40	00	72	44	00	40
	B25	B26	B27	B28	B29	B30	B31	B32	B33	B34	B35	B36
	00	72	54	00	40	00	72	64	00	40	00	72
	B37	B38	B39	B40
	74	00	80	00

EF_HPPLMN (Higher Priority PLMN Search period)

Logically: set to 6 minutes

Coding:

Coding:	B1
Hex	01

NG-RAN Cell 1:

– Mobile Country Code (MCC) = 254;

– Mobile Network Code (MNC) = 001;

– Tracking Area Code (TAC) = 000001;

– NG-RAN Cell Id = 0001 (36 bits).

NG-RAN Cell 2:

– Mobile Country Code (MCC) = 254;

– Mobile Network Code (MNC) = 003;

– Tracking Area Code (TAC) = 000001;

– NG-RAN Cell Id = 0001 (36 bits).

27.22.14.2.4.2 Procedure

Expected Sequence 2.1 (SMS-PP Data Download after Steering of Roaming via DL NAS TRANSPORT message with REFRESH command [Steering of Roaming])

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT message 2.1.1 with acknowledgement not requested List Type is secured packet	SOR header with: ACK set to "acknowledgement not requested" List Type set to "secured packet"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 2.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	ME→ UICC	FETCH
7	UICC → ME	PROACTIVE COMMAND: REFRESH 2.1.1 [Steering of Roaming]
8	ME→ UICC	TERMINAL RESPONSE: REFRESH 2.1.1
9	UICC → ME	PROACTIVE UICC SESSION ENDED
10	ME	Steering of Roaming procedure	As specified in TS 23.122 [29] clause 4.4.6 Note: The SoR procedure cannot be verified completely in this step. A verification of the complete SoR procedure is done in Expected Sequence 2.3

DL NAS TRANSPORT message 2.1.1

Logically:

Message details (referring to 3GPP TS 24.501 Figure 9.11.3.51.1)

Payload container type IE: "0100" (SOR transparent container)

SOR header:

SOR data type: "0" (SOR transparent container carries steering of roaming information)

List indication: "1" (list of preferred PLMN/access technology combinations is provided)

List type: "0" (The list type is a secured packet.)

ACK: "0" (acknowledgment not requested)

Secured packet: as specified in 3GPP TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	93	8A	B4	08
49	71	14	29	AA	31	22	07	00	A4	00	04
02	6F	61	22	0F	00	D6	00	00	0A	52	34
00	80	00	52	44	00	00	80	81	15	81	03
01	01	07	82	02	81	82	72	0A	52	34	00
80	00	52	44	00	00	80

ENVELOPE: SMS-PP DOWNLOAD 2.1.1

Logically:

SMS-PP Download:

Device identities:

Source device: Network

Destination device: UICC

SMS TPDU: Contents of Secured Packet from DL NAS TRANSPORT message 2.1.1

Coding:

BER-TLV:	D1	61	82	02	83	81	8B	5B	40	00	91	7F
	F6	00	00	00	00	00	00	00	4E	02	70	00
	00	49	15	02	00	10	10	B0	01	40	00	00
	00	00	00	00	93	8A	B4	08	49	71	14	29
	AA	31	22	07	00	A4	00	04	02	6F	61	22
	0F	00	D6	00	00	0A	52	34	00	80	00	52
	44	00	00	80	81	15	81	03	01	01	07	82
	02	81	82	72	0A	52	34	00	80	00	52	44
	00	00	80

PROACTIVE COMMAND: REFRESH 2.1.1

Logically:

Command details:

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities:

Source device: UICC

Destination device: ME

PLMNwAcT List:

1stPLMN: 254/003

1stACT: UTRAN

2ndPLMN: 254/004

2ndACT: GERAN

Coding:

BER-TLV:	D0	15	81	03	01	01	07	82	02	81	82	72
	0A	52	34	00	80	00	52	44	00	00	80

TERMINAL RESPONSE: REFRESH 2.1.1

Logically:

Command details:

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities:

Source device: ME

Destination device: UICC

Result:

General Result: Command performed successfully

Coding:

BER-TLV:

Expected Sequence 2.2 Void

Expected Sequence 2.3: (Steering of Roaming via DL NAS TRANSPORT message with "Acknowledgement requested" and REFRESH command [Steering of Roaming])

Step	Direction	MESSAGE / Action	Comments
1	NG-SS	NG-RAN Cell 1 and NG‑RAN Cell 2 transmit BCCH.
2	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
3	UICC → ME	PROACTIVE COMMAND PENDING: SET UP EVENT LIST 2.3.1	If programmable non-removable UICC with a Test Applet is used (as defined in clause 27.0), the TERMINAL RESPONSE cannot be verified by the Test Applet and that the LOCATION STATUS Event has been successfully registered in the device after step 5 is implicitly verified at steps 8 and 19.
4	ME → UICC	FETCH
5	UICC → ME	PROACTIVE COMMAND; SET UP EVENT LIST 2.3.1
6	ME → UICC	TERMINAL RESPONSE; SET UP EVENT LIST 2.3.1
7	ME → NG-SS	The ME successfully registers to NG-RAN cell 1
8	ME UICC	ENVELOPE: EVENT DOWNLOAD – Location Status 2.3.1
9	NG-SS → ME	DL NAS TRANSPORT message 2.3.1	SOR header with: ACK set to "acknowledgement requested" List Type set to "secured packet"
10	ME → UICC	ENVELOPE: SMS-PP DOWNLOAD 2.3.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
11	UICC → ME	SW1/SW2 ’91 XX’
12	ME → NG-SS	ME sends to NG-SS an acknowledgement in the Payload container IE of an UL NAS TRANSPORT message with Payload type IE set to "Steering of Roaming transparent container".	Note: this step can be performed in parallel or after step 13.
13	ME → UICC	FETCH
14	UICC → ME	PROACTIVE COMMAND: REFRESH 2.3.1 [Steering of Roaming]
15	ME → UICC	Update of EF_FPLMN	[Deletion of the entry with PLMN 254/003]
16	ME → UICC	TERMINAL RESPONSE: REFRESH 2.3.1
17	UICC → ME	Proactive UICC session is terminated
18	ME → NG-SS	The ME successfully registers to NG-RAN cell 2 within 6 minutes	[SOR transparent container 2.3.1 with Acknowledgement.] Note: The ME might have registered to the Cell 2 before this step
19	ME → UICC	ENVELOPE: EVENT DOWNLOAD – Location Status 2.3.2	PLMN MCC/MNC 254/003, Normal service

DL NAS TRANSPORT message 2.3.1

Logically:

Message details (referring to TS 24.501, Figure 9.11.3.51.1)

Payload container type IE: "0100" (SOR transparent container)

SOR header:

SOR data type: "0" (SOR transparent container carries steering of roaming information)

List indication: "1" (list of preferred PLMN/access technology combinations is provided)

List type: "0" (The list type is a secured packet.)

ACK: "1" (acknowledgment requested)

Secured packet: as specified in TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding: (Security payload with 254/003 and 254/004 included in the NG-RAN PLMN List)

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	93	8A	B4	08
49	71	14	29	AA	31	22	07	00	A4	00	04
02	6F	61	22	0F	00	D6	00	00	0A	52	34
00	08	00	52	44	00	08	00	81	15	81	03
01	01	07	82	02	81	82	72	0A	52	34	00
08	00	52	44	00	08	00

SOR Transparent container in REGISTRATION REQUEST (Acknowledgement) 2.3.1

Logically:

Payload containder details (referring to TS 24.501 Figure 9.11.3.51.4 and 9.11.3.51.6)

Payload container type IE: "0100" (SOR transparent container)

SOR header:

SOR data type: "1" (The SOR transparent container carries acknowledgement of successful

reception of the steering of roaming information)

ENVELOPE: SMS-PP DOWNLOAD 2.3.1

Logically:

SMS-PP Download

Device identities:

Source device: Network

Destination device: UICC

SMS TPDU: Contents of Secured Packet from DL NAS TRANSPORT message 2.3.1

Coding:

BER-TLV:	D1	61	82	02	83	81	8B	5B	40	00	91	7F
	F6	00	00	00	00	00	00	00	4E	02	70	00
	00	49	15	02	00	10	10	B0	01	40	00	00
	00	00	00	00	93	8A	B4	08	49	71	14	29
	AA	31	22	07	00	A4	00	04	02	6F	61	22
	0F	00	D6	00	00	0A	52	34	00	08	00	52
	44	00	08	00	81	15	81	03	01	01	07	82
	02	81	82	72	0A	52	34	00	08	00	52	44
	00	08	00

PROACTIVE COMMAND: SET UP EVENT LIST 2.3.1

Logically:

Command details:

Command number: 1

Command type: SET UP EVENT LIST

Command qualifier: ’00’

Device identities

Source device: UICC

Destination device: ME

Event List:

Event 1: Location status

Coding:

BER-TLV:	D0	0C	81	03	01	05	00	82	02	81	82	99
	01	03

TERMINAL RESPONSE: SET UP EVENT LIST 2.3.1

Logically:

Command details:

Command number: 1

Command type: SET UP EVENT LIST

Command qualifier: ’00’

Device identities:

Source device: ME

Destination device: UICC

Result:

General Result: Command performed successfully

Coding:

BER-TLV:

PROACTIVE COMMAND: REFRESH 2.3.1

Logically:

Command details:

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: UICC

Destination device: ME

PLMNwAcT List:

1^st PLMN: 254/003

1^st ACT: NG-RAN

2^nd PLMN: 254/004

2^nd ACT: NG-RAN

Coding:

BER-TLV:	D0	15	81	03	01	01	07	82	02	81	82	72
	0A	52	34	00	08	00	52	44	00	08	00

TERMINAL RESPONSE: REFRESH 2.3.1

Logically:

Command details:

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities:

Source device: ME

Destination device: UICC

Result:

General Result: Command performed successfully

Coding:

BER-TLV:

EVENT DOWNLOAD – LOCATION STATUS 2.3.1

Logically:

Event list: Location status

Device identities

Source device: ME

Destination device: UICC

Location status: normal service

Location Information:

MCC & MNC: the mobile country and network code (MCC = 254, MNC = 001)

TAC: the tracking area code (000001)

NG-SS cell id: the cell identity value (0001 (36 bits))

Coding:

BER-TLV:	D6	17	19	01	03	82	02	82	81	1B	01	00
	13	0B	52	14	00	00	00	01	00	00	00	00
	1F

EVENT DOWNLOAD – LOCATION STATUS 2.3.2

Logically:

Event list: Location status

Device identities

Source device: ME

Destination device: UICC

Location status: normal service

Location Information:

MCC & MNC: the mobile country and network code (MCC = 254, MNC = 003)

TAC: the tracking area code (000001)

NG-SS cell id: the cell identity value (0001 (36 bits))

Coding:

BER-TLV:	D6	17	19	01	03	82	02	82	81	1B	01	00
	13	0B	52	34	00	00	00	01	00	00	00	00
	1F

Expected Sequence 2.4 (SMS-PP Data Download in several ENVELOPE commands after Steering of Roaming via DL NAS TRANSPORT long message with REFRESH command [Steering of Roaming])

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME successfully REGISTER with NG-RAN cell.
3	NG-SS → ME	NG-SS send to ME DL NAS TRANSPORT long message 2.4.1 with acknowledgement not requested List Type is secured packet	SOR header with: ACK set to "acknowledgement not requested" List Type set to "secured packet"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 2.4.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a Note: Message is too long for one ENVELOPE command then it is cut in several ENVELOPE commands. 1^st part of message
5	UICC → ME	SW1/SW2 90 00
6	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 2.4.2	2^nd part of message
7	UICC → ME	SW1/SW2 90 00
8	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 2.4.3	3^rd and last part of message
9	UICC → ME	SW1/SW2 91 XX
10	ME→ UICC	FETCH
11	UICC → ME	PROACTIVE COMMAND: REFRESH 2.4.1 [Steering of Roaming]
12	ME→ UICC	TERMINAL RESPONSE: REFRESH 2.4.1
13	UICC → ME	PROACTIVE UICC SESSION ENDED
14	ME	Steering of Roaming procedure	As specified in TS 23.122 [29] clause 4.4.6 Note: The SoR procedure cannot be verified completely in this step. A verification of the complete SoR procedure is done in Expected Sequence 2.3

DL NAS TRANSPORT message 2.4.1

Logically:

Message details (refering to TS 24.501 Table 9.11.3.51.1)

Payload container type IE: "0100" (SOR transparent container)

SOR header:

SOR data type: "0" (SOR transparent container carries steering of roaming information)

List indication: "1" (list of preferred PLMN/access technology combinations is provided)

List type: "0" (The list type is a secured packet.)

ACK: "0" (acknowledgment not requested)

Secured packet as specified in TS 31.111 [15] clause 7.1.1.1a:

40	00	91	7F	F6	00	00	00	00	00	00	00
8C	07	00	03	1C	03	01	70	00	01	48	15
02	00	10	10	B0	01	40	00	00	00	00	00
00	02	99	54	A1	DC	40	46	7B	AA	82	01
2E	22	07	00	A4	00	04	02	6F	61	22	81
8C	00	D6	00	00	87	52	14	00	00	80	52
24	00	80	00	52	34	00	08	00	52	44	00
00	80	52	54	00	80	00	52	64	00	08	00
52	74	00	00	80	52	84	00	80	00	52	94
00	08	00	52	19	00	00	80	52	29	00	80
00	52	39	00	08	00	52	49	00	00	80	52
59	00	80	00	52	69	00	08	00	52	79	00
00	80	52	89	00	80	00	52	99	40	00	91
7F	F6	00	00	00	00	00	00	00	8C	05	00
03	1C	03	02	00	08	00	52	11	00	00	80
52	21	00	80	00	52	31	00	08	00	52	41
00	00	80	52	51	00	80	00	52	61	00	08
00	52	71	00	00	80	52	81	00	80	00	52
91	00	08	00	81	81	93	81	03	01	01	07
82	02	81	82	72	81	87	52	14	00	00	80
52	24	00	80	00	52	34	00	08	00	52	44
00	00	80	52	54	00	80	00	52	64	00	08
00	52	74	00	00	80	52	84	00	80	00	52
94	00	08	00	52	19	00	00	80	52	29	00
80	00	52	39	00	08	00	52	49	00	00	80
52	59	00	80	00	52	44	00	91	7F	F6	00
00	00	00	00	00	00	46	05	00	03	1C	03
03	69	00	08	00	52	79	00	00	80	52	89
00	80	00	52	99	00	08	00	52	11	00	00
80	52	21	00	80	00	52	31	00	08	00	52
41	00	00	80	52	51	00	80	00	52	61	00
08	00	52	71	00	00	80	52	81	00	80	00
52	91	00	08	00

ENVELOPE: SMS-PP DOWNLOAD 2.4.1

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 1^st part of Secured Patcket from DL NAS TRANSPORT message 2.4.1

Coding:

BER-TLV:	D1	81	A0	02	02	83	81	0B	81	99	40	00
	91	7F	F6	00	00	00	00	00	00	00	8C	07
	00	03	1C	03	01	70	00	01	48	15	02	00
	10	10	B0	01	40	00	00	00	00	00	00	02
	99	54	A1	DC	40	46	7B	AA	82	01	2E	22
	07	00	A4	00	04	02	6F	61	22	81	8C	00
	D6	00	00	87	52	14	00	00	80	52	24	00
	80	00	52	34	00	08	00	52	44	00	00	80
	52	54	00	80	00	52	64	00	08	00	52	74
	00	00	80	52	84	00	80	00	52	94	00	08
	00	52	19	00	00	80	52	29	00	80	00	52
	39	00	08	00	52	49	00	00	80	52	59	00
	80	00	52	69	00	08	00	52	79	00	00	80
	52	89	00	80	00	52	99

ENVELOPE: SMS-PP DOWNLOAD 2.4.2

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 2^nd part of Secured Patcket from DL NAS TRANSPORT message 2.4.1

Coding:

BER-TLV:	D1	81	A0	02	02	83	81	0B	81	99	40	00
	91	7F	F6	00	00	00	00	00	00	00	8C	05
	00	03	1C	03	02	00	08	00	52	11	00	00
	80	52	21	00	80	00	52	31	00	08	00	52
	41	00	00	80	52	51	00	80	00	52	61	00
	08	00	52	71	00	00	80	52	81	00	80	00
	52	91	00	08	00	81	81	93	81	03	01	01
	07	82	02	81	82	72	81	87	52	14	00	00
	80	52	24	00	80	00	52	34	00	08	00	52
	44	00	00	80	52	54	00	80	00	52	64	00
	08	00	52	74	00	00	80	52	84	00	80	00
	52	94	00	08	00	52	19	00	00	80	52	29
	00	80	00	52	39	00	08	00	52	49	00	00
	80	52	59	00	80	00	52

ENVELOPE: SMS-PP DOWNLOAD 2.4.3

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 3^rd part of Secured Patcket from DL NAS TRANSPORT message 2.4.1

Coding:

BER-TLV:	D1	59	02	02	83	81	0B	53	44	00	91	7F
	F6	00	00	00	00	00	00	00	46	05	00	03
	1C	03	03	69	00	08	00	52	79	00	00	80
	52	89	00	80	00	52	99	00	08	00	52	11
	00	00	80	52	21	00	80	00	52	31	00	08
	00	52	41	00	00	80	52	51	00	80	00	52
	61	00	08	00	52	71	00	00	80	52	81	00
	80	00	52	91	00	08	00

PROACTIVE COMMAND: REFRESH 2.4.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: UICC

Destination device: ME

PLMNwAcT List (27 entries)

1^st PLMN: 254/001 1^st ACT: GERAN

2^nd PLMN: 254/002 2^nd ACT: UTRAN

3^rd PLMN: 254/003 3^rd ACT: NG-RAN

4^th PLMN: 254/004 4^th ACT: GERAN

5^th PLMN: 254/005 5^th ACT: UTRAN

6^th PLMN: 254/006 6^th ACT: NG-RAN

7^th PLMN: 254/007 7^th ACT: GERAN

8^th PLMN: 254/008 8^th ACT: UTRAN

9^th PLMN: 254/009 9^th ACT: NG-RAN

10^th PLMN: 259/001 10^th ACT: GERAN

11^th PLMN: 259/002 11^th ACT: UTRAN

12^th PLMN: 259/003 12^th ACT: NG-RAN

13^th PLMN: 259/004 13^th ACT: GERAN

14^th PLMN: 259/005 14^th ACT: UTRAN

15^th PLMN: 259/006 15^th ACT: NG-RAN

16^th PLMN: 259/007 16^th ACT: GERAN

17^th PLMN: 259/008 17^th ACT: UTRAN

18^th PLMN: 259/009 18^th ACT: NG-RAN

19^th PLMN: 251/001 19^th ACT: GERAN

20^th PLMN: 251/002 20^th ACT: UTRAN

21^st PLMN: 251/003 21^st ACT: NG-RAN

22^nd PLMN: 251/004 22^nd ACT: GERAN

23^rd PLMN: 251/005 23^rd ACT: UTRAN

24^th PLMN: 251/006 24^th ACT: NG-RAN

25^th PLMN: 251/007 25^th ACT: GERAN

26^th PLMN: 251/008 26^th ACT: UTRAN

27^th PLMN: 251/009 27^th ACT: NG-RAN

Coding:

BER-TLV:	D0	81	93	81	03	01	01	07	82	02	81	82
	72	81	87	52	14	00	00	80	52	24	00	80
	00	52	34	00	08	00	52	44	00	00	80	52
	54	00	80	00	52	64	00	08	00	52	74	00
	00	80	52	84	00	80	00	52	94	00	08	00
	52	19	00	00	80	52	29	00	80	00	52	39
	00	08	00	52	49	00	00	80	52	59	00	80
	00	52	69	00	08	00	52	79	00	00	80	52
	89	00	80	00	52	99	00	08	00	52	11	00
	00	80	52	21	00	80	00	52	31	00	08	00
	52	41	00	00	80	52	51	00	80	00	52	61
	00	08	00	52	71	00	00	80	52	81	00	80
	00	52	91	00	08	00

TERMINAL RESPONSE: REFRESH 2.4.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Coding:

BER-TLV:

27.22.14.2.5 Test requirement

The ME shall operate in the manner defined in expected sequence 2.1 and 2.2.

27.22.14.3 Steering of Roaming via REGISTRATION ACCEPT message

27.22.14.3.1 Definition and applicability

See clause 3.2.2.

27.22.14.3.2 Conformance requirement

The ME shall support the Proactive UICC: SMS-PP Data Download facility as defined in the following technical specifications:

– TS 31.111 [15] clause 5, clause 7.1, clause 8.1, clause 8.7, clause 8.13 and clause 11.

– TS 31.115 [28] clause 4.

– TS 23.038 [7] clause 4.

The ME shall support the Procedure for SMS-PP data download via REGISTRATION ACCEPT messages as defined in the following technical specifications:

– TS 31.111 [15] clause 7.1.1.1a.

The ME shall support the steering of roaming procedure as defined in:

– TS 23.122 [29] clause 4.4.6.

27.22.14.3.3 Test purpose

To verify that when the service "data download via SMS Point-to-point" is available in the USIM Service Table and the ME receives a REGISTRATION ACCEPT message that includes:

– a SOR transparent container information element with list type with value "0"= secure packet containing a secure packet constructed as an SMS-Deliver (as specified in TS 23.040 [5] with:

– protocol identifier = SIM data download;

– data coding scheme = class 2 message;

and the integrity check of the message was successful then the ME shall:

– pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as defined in TS 31.111 [15] clause 7.1.1.2;

– not display or alert the user;

Where the secure packet is coded as a Command Packet formatted as Short Message Point to Point (as specified in TS 31.115 [41])).

To verify that the ME interprets the UICC returns response correctly.

27.22.14.3.4 Method of Test

27.22.14.3.4.1 Initial conditions

The ME is connected to the USIM Simulator and the NG-SS.

The ME is connected to NG-SS and it has performed the Registration procedure.

The default NG-RAN UICC and the following parameters are used:

EF_UST (USIM Service Table)

EF_UST shall be configured as defined in 27.22.2D.1 with the exception that Service n°42 "Operator controlled PLMN selector with Access Technology" and Service n°127 "Control plane-based steering of UE in VPLMN" are available.

The NG-RAN UICC parameters are:

one OTA Key Set for Remote Management with:
- Key Version: 01
  - 1^st key
    - Key Index (Kic): 01
    - Key Algorithm: Triple DES
    - Key value: 000102030405060708090A0B0C0D0E0F
  - 2^nd key
    - Key Index (Kid): 02
    - Key Algorithm: Triple DES
    - Key value: 000102030405060708090A0B0C0D0E0F
  - 3^rd key
    - Key Index (Kik): 03
    - Key Algorithm: Triple DES
    - Key value: 000102030405060708090A0B0C0D0E0F

The NG-RAN parameters of the system simulator are:

– Mobile Country Code (MCC) = 001;

– Mobile Network Code (MNC) = 02;

– Tracking Area Code (TAC) = 000001;

– NG-RAN Cell Id = 0001 (36 bits).

The elementary files are coded as USIM Application Toolkit default with the following exceptions:

– The "data download via SMS Point-to-point" service is available in the USIM Service Table.

Prior to this test, the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.

27.22.14.3.4.2 Procedure

Expected Sequence 3.1 (SMS-PP Data Download after Steering of Roaming via REGISTRATION ACCEPT message with REFRESH command [Steering of Roaming])

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME initiates registration to NG-RAN cell.
3	NG-SS → ME	ME is successfully registered to NG-RAN NG-SS sends REGISTRATION ACCEPT message 3.1.1 with SOR transparent container	SOR header with: ACK set to "acknowledgement not requested" List Type set to "secured packet"
4	ME→ UICC	ENVELOPE: SMS-PP DOWNLOAD 3.1.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a
5	UICC → ME	SW1/SW2 91 XX
6	ME→ UICC	FETCH
7	UICC → ME	PROACTIVE COMMAND: REFRESH 3.1.1 [Steering of Roaming]
8	ME→ UICC	TERMINAL RESPONSE: REFRESH 3.1.1
9	UICC → ME	PROACTIVE UICC SESSION ENDED
10	ME	Steering of Roaming procedure	As specified in TS 23.122 [29] clause 4.4.6 Note: the complete SOR procedure cannot be verified.

REGISTRATION ACCEPT message 3.1.1

Logically:

Including SOR transparent container IEI 73 (referring to TS 24.501 Table 8.2.7.1.1) defined as below

Message details (referring to TS 24.501 Figure 9.11.3.51.1)

SOR header:

SOR data type: "0" (SOR transparent container carries steering of roaming information)

List indication: "1" (list of preferred PLMN/access technology combinations is provided)

List type: "0" (The list type is a secured packet.)

ACK: "0" (acknowledgment not requested)

Secured packet as specified in TS 31.111 [15] clause 7.1.1.1a – TPDU Command Packet

Coding:

40	00	91	7F	F6	00	00	00	00	00	00	00
4E	02	70	00	00	49	15	02	00	10	10	B0
01	40	00	00	00	00	00	00	93	8A	B4	08
49	71	14	29	AA	31	22	07	00	A4	00	04
02	6F	61	22	0F	00	D6	00	00	0A	52	34
00	80	00	52	44	00	00	80	81	15	81	03
01	01	07	82	02	81	82	72	0A	52	34	00
80	00	52	44	00	00	80

ENVELOPE: SMS-PP DOWNLOAD 3.1.1

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU Contents of Secured Packet from REGISTRATION ACCEPT message 3.1.1

Coding:

BER-TLV:	D1	61	82	02	83	81	8B	5B	40	00	91	7F
	F6	00	00	00	00	00	00	00	4E	02	70	00
	00	49	15	02	00	10	10	B0	01	40	00	00
	00	00	00	00	93	8A	B4	08	49	71	14	29
	AA	31	22	07	00	A4	00	04	02	6F	61	22
	0F	00	D6	00	00	0A	52	34	00	80	00	52
	44	00	00	80	81	15	81	03	01	01	07	82
	02	81	82	72	0A	52	34	00	80	00	52	44
	00	00	80

PROACTIVE COMMAND: REFRESH 3.1.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: UICC

Destination device: ME

PLMNwAcT List:

1stPLMN: 254/003

1stACT: UTRAN

2ndPLMN: 254/004

2ndACT: GERAN

Coding:

BER-TLV:	D0	15	81	03	01	01	07	82	02	81	82	72
	0A	52	34	00	80	00	52	44	00	00	80

TERMINAL RESPONSE: REFRESH 3.1.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Coding:

BER-TLV:

Expected Sequence 3.2 Void

Expected Sequence 3.3 (SMS-PP Data Download in several ENVELOPE commands after Steering of Roaming via REGISTRATION ACCEPT long message with REFRESH command [Steering of Roaming])

Step	Direction	MESSAGE / Action	Comments
1	USER → ME	The ME is switched on	ME will perform Profile Download and USIM initialisation
2	ME → NG-SS	ME initiates registration to NG-RAN
3	NG-SS → ME	ME is successfully registered to NG-RAN NG-SS sends REGISTRATION ACCEPT long message 3.3.1 with acknowledgement not requested List Type is secured packet	SOR header with: ACK set to "acknowledgement not requested" List Type set to "secured packet"
4	ME → UICC	ENVELOPE: SMS-PP DOWNLOAD 3.3.1	the ME shall pass the message transparently to the UICC using the ENVELOPE (SMS-PP DOWNLOAD) command as specified in TS 31.111 [15] clause 7.1.1.1a Note: Message is too long for one ENVELOPE command then it is cut in several ENVELOPE commands. 1^st part of message
5	UICC → ME	SW1/SW2 90 00
6	ME → UICC	ENVELOPE: SMS-PP DOWNLOAD 3.3.2	2^nd part of message
7	UICC → ME	SW1/SW2 90 00
8	ME → UICC	ENVELOPE: SMS-PP DOWNLOAD 3.3.3	3^rd and last part of message
9	UICC → ME	SW1/SW2 91 XX
10	ME → UICC	FETCH
11	UICC → ME	PROACTIVE COMMAND: REFRESH 3.3.1 [Steering of Roaming]
12	ME → UICC	TERMINAL RESPONSE: REFRESH 3.3.1
13	UICC → ME	PROACTIVE UICC SESSION ENDED
14	ME	Steering of Roaming procedure	As specified in TS 23.122 [29] clause 4.4.6 Note: the complete SOR procedure cannot be verified.

REGISTRATION ACCEPT message 3.3.1

Logically:

Including SOR transparent container IEI 73 (refering to TS 24.501 Table 8.2.7.1.1) defined as below

Message details (refering to TS 24.501 Table 9.11.3.51.1)

SOR header:

SOR data type: "0" (SOR transparent container carries steering of roaming information)

List indication: "1" (list of preferred PLMN/access technology combinations is provided)

List type: "0" (The list type is a secured packet.)

ACK: "0" (acknowledgment not requested)

Secured packet as specified in TS 31.111 [15] clause 7.1.1.1a:

40	00	91	7F	F6	00	00	00	00	00	00	00
8C	07	00	03	1C	03	01	70	00	01	48	15
02	00	10	10	B0	01	40	00	00	00	00	00
00	02	99	54	A1	DC	40	46	7B	AA	82	01
2E	22	07	00	A4	00	04	02	6F	61	22	81
8C	00	D6	00	00	87	52	14	00	00	80	52
24	00	80	00	52	34	00	08	00	52	44	00
00	80	52	54	00	80	00	52	64	00	08	00
52	74	00	00	80	52	84	00	80	00	52	94
00	08	00	52	19	00	00	80	52	29	00	80
00	52	39	00	08	00	52	49	00	00	80	52
59	00	80	00	52	69	00	08	00	52	79	00
00	80	52	89	00	80	00	52	99	40	00	91
7F	F6	00	00	00	00	00	00	00	8C	05	00
03	1C	03	02	00	08	00	52	11	00	00	80
52	21	00	80	00	52	31	00	08	00	52	41
00	00	80	52	51	00	80	00	52	61	00	08
00	52	71	00	00	80	52	81	00	80	00	52
91	00	08	00	81	81	93	81	03	01	01	07
82	02	81	82	72	81	87	52	14	00	00	80
52	24	00	80	00	52	34	00	08	00	52	44
00	00	80	52	54	00	80	00	52	64	00	08
00	52	74	00	00	80	52	84	00	80	00	52
94	00	08	00	52	19	00	00	80	52	29	00
80	00	52	39	00	08	00	52	49	00	00	80
52	59	00	80	00	52	44	00	91	7F	F6	00
00	00	00	00	00	00	46	05	00	03	1C	03
03	69	00	08	00	52	79	00	00	80	52	89
00	80	00	52	99	00	08	00	52	11	00	00
80	52	21	00	80	00	52	31	00	08	00	52
41	00	00	80	52	51	00	80	00	52	61	00
08	00	52	71	00	00	80	52	81	00	80	00
52	91	00	08	00

ENVELOPE: SMS-PP DOWNLOAD 3.3.1

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 1^st part of Secured Packet from REGISTRATION ACCEPT message 3.3.1

Coding:

BER-TLV:	D1	81	A0	02	02	83	81	0B	81	99	40	00
	91	7F	F6	00	00	00	00	00	00	00	8C	07
	00	03	1C	03	01	70	00	01	48	15	02	00
	10	10	B0	01	40	00	00	00	00	00	00	02
	99	54	A1	DC	40	46	7B	AA	82	01	2E	22
	07	00	A4	00	04	02	6F	61	22	81	8C	00
	D6	00	00	87	52	14	00	00	80	52	24	00
	80	00	52	34	00	08	00	52	44	00	00	80
	52	54	00	80	00	52	64	00	08	00	52	74
	00	00	80	52	84	00	80	00	52	94	00	08
	00	52	19	00	00	80	52	29	00	80	00	52
	39	00	08	00	52	49	00	00	80	52	59	00
	80	00	52	69	00	08	00	52	79	00	00	80
	52	89	00	80	00	52	99

ENVELOPE: SMS-PP DOWNLOAD 3.3.2

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 2^nd part of Secured Patcket from REGISTRATION ACCEPT message 3.3.1

Coding:

BER-TLV:	D1	81	A0	02	02	83	81	0B	81	99	40	00
	91	7F	F6	00	00	00	00	00	00	00	8C	05
	00	03	1C	03	02	00	08	00	52	11	00	00
	80	52	21	00	80	00	52	31	00	08	00	52
	41	00	00	80	52	51	00	80	00	52	61	00
	08	00	52	71	00	00	80	52	81	00	80	00
	52	91	00	08	00	81	81	93	81	03	01	01
	07	82	02	81	82	72	81	87	52	14	00	00
	80	52	24	00	80	00	52	34	00	08	00	52
	44	00	00	80	52	54	00	80	00	52	64	00
	08	00	52	74	00	00	80	52	84	00	80	00
	52	94	00	08	00	52	19	00	00	80	52	29
	00	80	00	52	39	00	08	00	52	49	00	00
	80	52	59	00	80	00	52

ENVELOPE: SMS-PP DOWNLOAD 3.3.3

Logically:

SMS-PP Download

Device identities

Source device: Network

Destination device: UICC

SMS TPDU 3^rd part of Secured Patcket from REGISTRATION ACCEPT message 3.2.1

Coding:

BER-TLV:	D1	59	02	02	83	81	0B	53	44	00	91	7F
	F6	00	00	00	00	00	00	00	46	05	00	03
	1C	03	03	69	00	08	00	52	79	00	00	80
	52	89	00	80	00	52	99	00	08	00	52	11
	00	00	80	52	21	00	80	00	52	31	00	08
	00	52	41	00	00	80	52	51	00	80	00	52
	61	00	08	00	52	71	00	00	80	52	81	00
	80	00	52	91	00	08	00

PROACTIVE COMMAND: REFRESH 3.3.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: UICC

Destination device: ME

PLMNwAcT List (27 entries)

1^st PLMN: 254/001 1^st ACT: GERAN

2^nd PLMN: 254/002 2^nd ACT: UTRAN

3^rd PLMN: 254/003 3^rd ACT: NG-RAN

4^th PLMN: 254/004 4^th ACT: GERAN

5^th PLMN: 254/005 5^th ACT: UTRAN

6^th PLMN: 254/006 6^th ACT: NG-RAN

7^th PLMN: 254/007 7^th ACT: GERAN

8^th PLMN: 254/008 8^th ACT: UTRAN

9^th PLMN: 254/009 9^th ACT: NG-RAN

10^th PLMN: 259/001 10^th ACT: GERAN

11^th PLMN: 259/002 11^th ACT: UTRAN

12^th PLMN: 259/003 12^th ACT: NG-RAN

13^th PLMN: 259/004 13^th ACT: GERAN

14^th PLMN: 259/005 14^th ACT: UTRAN

15^th PLMN: 259/006 15^th ACT: NG-RAN

16^th PLMN: 259/007 16^th ACT: GERAN

17^th PLMN: 259/008 17^th ACT: UTRAN

18^th PLMN: 259/009 18^th ACT: NG-RAN

19^th PLMN: 251/001 19^th ACT: GERAN

20^th PLMN: 251/002 20^th ACT: UTRAN

21^st PLMN: 251/003 21^st ACT: NG-RAN

22^nd PLMN: 251/004 22^nd ACT: GERAN

23^rd PLMN: 251/005 23^rd ACT: UTRAN

24^th PLMN: 251/006 24^th ACT: NG-RAN

25^th PLMN: 251/007 25^th ACT: GERAN

26^th PLMN: 251/008 26^th ACT: UTRAN

27^th PLMN: 251/009 27^th ACT: NG-RAN

Coding:

BER-TLV:	D0	81	93	81	03	01	01	07	82	02	81	82
	72	81	87	52	14	00	00	80	52	24	00	80
	00	52	34	00	08	00	52	44	00	00	80	52
	54	00	80	00	52	64	00	08	00	52	74	00
	00	80	52	84	00	80	00	52	94	00	08	00
	52	19	00	00	80	52	29	00	80	00	52	39
	00	08	00	52	49	00	00	80	52	59	00	80
	00	52	69	00	08	00	52	79	00	00	80	52
	89	00	80	00	52	99	00	08	00	52	11	00
	00	80	52	21	00	80	00	52	31	00	08	00
	52	41	00	00	80	52	51	00	80	00	52	61
	00	08	00	52	71	00	00	80	52	81	00	80
	00	52	91	00	08	00

TERMINAL RESPONSE: REFRESH 3.3.1

Logically:

Command details

Command number: 1

Command type: REFRESH

Command qualifier: Steering of Roaming

Device identities

Source device: ME

Destination device: UICC

Result

General Result: Command performed successfully

Coding:

BER-TLV:

27.22.14.3.5 Test requirement

The ME shall operate in the manner defined in expected sequence 3.1 to 3.2.

Annex A (normative):
Details of Test-SIM (TestSIM)

The TestSIM shall be able to present the following data:

ANSWER TO RESET

Logically:

TS (Initial character): ‘3B’

T0 (Format character): ’86’ (Following interface characters: TD(1), number of historical characters: 6)

TD1: ’00’ (Following interface characters: none, Transfer protocol: T=0)

T1: 91

T2: 99

T3: 00

T4: 12

T5: C1

T6: 00

Coding:

1. For a successful outcome of the command "Select MasterFile" the TestSIM shall send SW1/SW2 "9F 1B".

2. For a successful outcome of the command "Get Response with Length 1B" on the MasterFile the TestSIM shall respond:

RFU: ’00 00′

Not allocated memory: ‘653 bytes’

File ID: Master File

Type of file: MF

RFU: 00 00 22 FF 01′

Length of following data: 14 bytes’

File characteristics:

Clock Stop: Not allowed

Min. frequency for GSM algorithm: 13/8 MHz

Technology identification: 3V Technology SIM

CHV1: disabled

DFs in current directory: 2

EFs in current directory: 8

Number of CHV and admin. Codes: 3

RFU byte 18: 00

CHV1 status:

False representations remaining: 3

RFU-bits 7-5: 000

Secret code: Initialized

Unlock CHV1 status:

False representations remaining: 10

RFU-bits 7-5: 000

Secret code: Initialized

CHV2 status:

False representations remaining: 3

RFU-bits 7-5: 000

Secret code: Initialized

Unlock CHV2 status:

False representations remaining: 10

RFU-bits 7-5: 000

Secret code: Initialized

RFU bytes 23: 00

Reserved for admin. management: 00 83 00 FF

Status Words

SW1 / SW2: Normal ending of command

Coding:

Coding	00	00	02	8D	3F	00	01	00	00	22	FF	01
	0E	9B	02	08	03	00	83	8A	83	8A	00	00
	83	00	FF	90	00

1. For a successful outcome of the command "Select GSM" the TestSIM shall send SW1/SW2 "9F 1B".

2. For a successful outcome of the command "Select PLMN" the TestSIM shall send SW1/SW2 "9F 0F".

3. EF_PLMN Information:

RFU-Bytes 1-2: 00 00

File size: 102 bytes

File ID: 6F30

Type of File: Elementary file

Byte 8

RFU: 00

Access Condition:

UPDATE: CHV1

READ/SEEK: CHV1

RFU-bits 4-1: 1111

INCREASE: NEVER

INVALIDATE: NEVER

REHABILITATE: NEVER

File Status:

Invalidation status: File not invalidated

Readable/updateable: Not readable/updatable when invalidated

RFU-bits 8-4, 2: 0000 0

Length of following data: 2 bytes

Structure: Transparent

Length of record: 00

The initial coding of the EF_PLMN shall be FF FF … FF (logically: Empty).

Annex B (normative):
Details of terminal profile support

Table E.1: TERMINAL PROFILE support

Item	Byte.bit	Terminal Profile	Ref.	Release	Status	Mnemonic
1	1.1	Profile Download	TS 31.111 §5.2	R99	M	PD_Pro_Dvnl
2	1.2	SMS-PP data download	TS 31.111 §5.2	R99	C279	PD_SMS_PP
3	1.3	Cell Broadcast data download	TS 31.111 §5.2	R99	C279	PD_CB
4	1.4	Menu selection	TS 31.111 §5.2	R99	C267 AND C268	PD_Menu_sel
5	1.5	Bit =1 if SMS-PP data Download supported	TS 31.111 §5.2	R99	C279	PD_SMS_PP
6	1.6	Timer expiration	TS 31.111 §5.	R99	M	PD_TExpir
7	1.7	Bit=1 if Call control supported	TS 31.111 §5.2.	R99	C304 AND C279	PD_CC
8	1.8	Bit=1 if Call control supported	TS 31.111 §5.2	R99	C304 AND C279	PD_CC
9	2.1	Command result	TS 31.111 §5.2	R99	M	PD_Cmd_Res
10	2.2	Call Control by USIM	TS 31.111 §5.2	R99	C304 AND C279	PD_CC
11	2.3	Bit=1 if Call control supported	TS 31.111 §5.2	R99	C304 AND C279	PD_CC
12	2.4	MO short message control by USIM	TS 31.111 §5.2	R99	C279	PD_MO_SMS_CC
13	2.5	Bit=1 if Call control supported	TS 31.111 §5.2	R99	C304 AND C279	PD_CC
14	2.6	UCS2 Entry supported	TS 31.111 §5.2	R99	C203 AND C268	PD_UCS2_entry
15	2.7	UCS2 Display supported	TS 31.111 §5.2	R99	C204 AND C267	PD_UCS2_Display
16	2.8	Bit=1 if Display Text supported	TS 31.111 §5.2	R99	C267	PD_Display_Text
17	3.1	DISPLAY TEXT	TS 31.111 §5.2	R99	C267	PD_Display_Text
18	3.2	GET INKEY	TS 31.111 §5.2	R99	C267 AND C268	PD_Get_Inkey
19	3.3	GET INPUT	TS 31.111 §5.2	R99	C267 AND C268	PD_Get_Input
20	3.4	MORE TIME	TS 31.111 §5.2	R99	M	PD_More_Time
21	3.5	PLAY TONE	TS 31.111 §5.2 TS 11.14, 5	R99	C269	PD_Play_Tone
22	3.6	POLL INTERVAL	TS 31.111 §5.2 TS 11.14, 5	R99	M	PD_Poll_interval
23	3.7	POLLING OFF	TS 31.111 §5.2	R99	M	PD_Polling_Off
24	3.8	REFRESH	TS 31.111 §5.2	R99	M	PD_Refresh
25	4.1	SELECT ITEM	TS 31.111 §5.2	R99	C267 AND C268	PD_Select_Item
26	4.2	SEND SHORT MESSAGE	TS 31.111 §5.2	R99	C279	PD_Send_SMS
27	4.3	SEND SS	TS 31.111 §5.2	R99	C279	PD_Send_SS
28	4.4	SEND USSD	TS 31.111 §5.2	R99	C279	PD_Send_USSD
29	4.5	SET UP CALL	TS 31.111 §5.2	R99	C291	PD_SetUp_Call
30	4.6	SET UP MENU	TS 31.111 §5.2	R99	C267 AND C268	PD_SetUp_Menu
31	4.7	PROVIDE LOCAL INFORMATION (LOCI & IMEI)	TS 31.111 §5.2	R99	M	PD_Provide_Local
32	4.8	PROVIDE LOCAL INFORMATION (NMR)	TS 31.111 §5.2	R99	C280	PD_Provide_Local_NMR
33	5.1	SET UP EVENT LIST	TS 31.111 §5.2	R99	M	PD_Setup_Evt_List
34	5.2	Event: MT call	TS 31.111 §5.2	R99	C270 AND C279	PD_MT_Call
35	5.3	Event: Call connected	TS 31.111 §5.2	R99	C270 AND C279	PD_Call_Conn
36	5.4	Event: Call disconnected	TS 31.111 §5.2	R99	C270 AND C279	PD_Call_Disc
37	5.5	Event: Location status	TS 31.111 §5.2	R99	M	PD_Loc_Status
38	5.6	Event: User activity	TS 31.111 §5.2	R99	C268	PD_User_Act
39	5.7	Event: Idle screen available	TS 31.111 §5.2	R99	C267	PD_Idle_Scr_Avail
40	5.8	Event: Card reader status	TS 31.111 §5.2	R99	C206	PD_Evt_Rdr_Status
41	6.1	Event: Language selection	TS 31.111 §5.2	R99	C271	PD_Lang_Select
42	6.2	Event: Browser Termination	TS 31.111 §5.2	R99	C212 AND C267 AND C268	PD_Browser_Term
43	6.3	Event: Data available	TS 31.111 §5.2	R99	C223	PD_Data_Avail
44	6.4	Event: Channel status	TS 31.111 §5.2	R99	C223	PD_Evt_Ch_Status
45	6.5	Event:Access Technology Change	TS 31.111 §5.2	Rel-4	C306	PD_Evt_ATC
46	6.6	Event: Display Parameters Changed	TS 31.111 §5.2	Rel-4	C218 AND C267	PD_Disp_Resiz
47	6.7	Event: Local Connection	TS 31.111 §5.2	Rel-4	C224	PD_Evt_LC
48	6.8	Event: Network Search Mode Change	TS 31.111 §5.2	Rel-6	M	PD_Evt_NSMC
49	7.1	POWER ON CARD	TS 31.111 §5.2	R99	C206	PD_C_On
50	7.2	POWER OFF CARD	TS 31.111 §5.2	R99	C206	PD_C_Off
51	7.3	PERFORM CARD APDU	TS 31.111 §5.2	R99	C206	PD_C_APDU
52	7.4	GET READER STATUS (Card reader status)	TS 31.111 §5.2	R99	C206	PD_Get_Rdr_Status
53	7.5	GET READER STATUS (Card reader identifier)	TS 31.111 §5.2	R99	C208	PD_Get_Rdr_Id
54	7.6	RFU	TS 31.111 §5.2	R99	X	PD_RFU_54
55	7.7	RFU	TS 31.111 §5.2	R99	X	PD_RFU_55
56	7.8	RFU	TS 31.111 §5.2	R99	X	PD_RFU_56
57	8.1	TIMER MANAGEMENT (start, stop)	TS 31.111 §5.2	R99	M	PD_Timer_Mgt_Start_Stop
58	8.2	TIMER MANAGEMENT (get current value)	TS 31.111 §5.2	R99	M	PD_Timer_Val
59	8.3	PROVIDE LOCAL INFORMATION (date, time and time zone)	TS 31.111 §5.2	R99	M	PD_Provide_Local_D_Time
60	8.4	Bit=1 if Get Inkey	TS 31.111 §5.2	R99	C268	PD_Get_Inkey
61	8.5	SET UP IDLE MODE TEXT	TS 31.111 §5.2	R99	C267	PD_Stup_Id_Mod_Txt
62	8.6	RUN AT COMMAND (i.e. class "b" is supported)	TS 31.111 §5.2	R99	C209	PD_Run_AT
63	8.7	Bit=1 if Set UpCall	TS 31.111 §5.2	R99	C267 AND C268 AND C270	PD_SetUp_Call
64	8.8	Bit=1 if Call Control	TS 31.111 §5.2	R99	C304 AND C279	PD_CC
65	9.1	Bit=1 if Display Text	TS 31.111 §5.2	R99	C267	PD_Display_Text
66	9.2	SEND DTMF command	TS 31.111 §5.2	R99	C270 AND C279	PD_Send_DTMF
67	9.3	Bit = 1 if Provide Local Information (NMR) supported	TS 31.111 §5.2	R99	C279	PD_Provide_Local
68	9.4	PROVIDE LOCAL INFORMATION (language)	TS 31.111 §5.2	R99	C292	PD_Provide_Local_LS
69	9.5	PROVIDE LOCAL INFORMATION (Timing Advance)	TS 31.111 §5.2	R99	C280	PD_Provide_Local_TA
70	9.6	LANGUAGE NOTIFICATION	TS 31.111 §5.2	R99	C293	PD_Lang_Notif
71	9.7	LAUNCH BROWSER	TS 31.111 §5.2	R99	C212 AND C267 AND C268	PD_Launch_Brws
72	9.8	PROVIDE LOCAL INFORMATION (Access Technology)	TS 31.111 §5.2	Rel-4	M	PD_Provide_Local_AT
73	10.1	Soft keys support for SELECT ITEM	TS 31.111 §5.2	R99	C213	PD_Softkey_Select_Item
74	10.2	Soft Keys support for SET UP MENU	TS 31.111 §5.2	R99	C213	PD_Softkey_SetUp _Menu
75	10.3	RFU	TS 31.111 §5.2	R99	X	PD_RFU_75
76	10.4	RFU	TS 31.111 §5.2	R99	X	PD_RFU_76
77	10.5	RFU	TS 31.111 §5.2	R99	X	PD_RFU_77
78	10.6	RFU	TS 31.111 §5.2	R99	X	PD_RFU_78
79	10.7	RFU	TS 31.111 §5.2	R99	X	PD_RFU_79
80	10.8	RFU	TS 31.111 §5.2	R99	X	PD_RFU_80
81	11.1	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
82	11.2	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
83	11.3	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
84	11.4	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
85	11.5	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
86	11.6	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
87	11.7	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
88	11.8	Maximum number of soft keys available (‘FF’ = RFU)	TS 31.111 §5.2	R99	C214	PD_Max_SoftKey
89	12.1	OPEN CHANNEL	TS 31.111 §5.2	R99	C223	PD_Open_Ch
90	12.2	CLOSE CHANNEL	TS 31.111 §5.2	R99	C223	PD_Close_Ch
91	12.3	RECEIVE DATA	TS 31.111 §5.2	R99	C223	PD_Rx_Data
92	12.4	SEND DATA	TS 31.111 §5.2	R99	C223	PD_Send_Data
93	12.5	GET CHANNEL STATUS	TS 31.111 §5.2	R99	C223	PD_Get_Ch_Status
94	12.6	SERVICE SEARCH	TS 31.111 §5.2	Rel-4	C224	PD_Serv_Search
95	12.7	GET SERVICE INFORMATION	TS 31.111 §5.2	Rel-4	C224	PD_Get_Serv_Info
96	12.8	DECLARE SERVICE	TS 31.111 §5.2	Rel-4	C224	PD_Declare_Serv
97	13.1	CSD supported by ME	TS 31.111 §5.2	R99	C207	PD_CSD
98	13.2	GPRS supported by ME	TS 31.111 §5.2	R99	C222	PD_GPRS
99	13.3	Bluetooth supported by terminal	TS 31.111 §5.2	Rel-4	C225	PD_BT
100	13.4	IrDA Supported by terminal	TS 31.111 §5.2	Rel-4	C226	PD_IrDA
101	13.5	RS232 Supported by terminal	TS 31.111 §5.2	Rel-4	C227	PD_RS232
102	13.6	Number of channels supported by ME	TS 31.111 §5.2	R99	C257	PD_Nb_Channel
103	13.7	Number of channels supported by ME	TS 31.111 §5.2	R99	C257	PD_Nb_Channel
104	13.8	Number of channels supported by ME	TS 31.111 §5.2	R99	C257	PD_Nb_Channel
105	14.1	Number of characters supported down the ME	TS 31.111 §5.2	R99	C274	PD_Nb_Char
106	14.2	Number of characters supported down the ME	TS 31.111 §5.2	R99	C274	PD_Nb_Char
107	14.3	Number of characters supported down the ME	TS 31.111 §5.2	R99	C274	PD_Nb_Char
108	14.4	Number of characters supported down the ME	TS 31.111 §5.2	R99	C274	PD_Nb_Char
109	14.5	Number of characters supported down the ME	TS 31.111 §5.2	R99	C274	PD_Nb_Char
110	14.6	No display capability (i.e class "ND" is indicated)	TS 31.111 §5.2	Rel-8	C276	PD_Type_ND
111	14.7	No keypad available (i.e. class "NK" is indicated)	TS 31.111 §5.2	Rel-8	C277	PD_Type_NK
112	14.8	Screen Sizing Parameters	TS 31.111 §5.2	R99	C216	PD_Screen_Siz
113	15.1	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
114	15.2	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
115	15.3	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
116	15.4	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
117	15.5	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
118	15.6	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
119	15.7	Number of characters supported across the ME display	TS 31.111 §5.2	R99	C274	PD_Nb_Char_Disp
120	15.8	Variable size fonts Supported	TS 31.111 §5.2	R99	C274	PD_Var_Font
121	16.1	Display can be resized	TS 31.111 §5.2	R99	C218	PD_Disp_Resiz
122	16.2	Text Wrapping supported	TS 31.111 §5.2	R99	C273	PD_Txt_Wrap
123	16.3	Text Scrolling supported	TS 31.111 §5.2	R99	C273	PD_Txt_Scroll
124	16.4	Text attributes supported	TS 31.111 §5.2	Rel-5	C228	PD_Text_Attrib
125	16.5	RFU	TS 11.14, 5	R96	X	PD_RFU_125
126	16.6	Width reduction when in a menu	TS 31.111 §5.2	R99	C274	PD_Width_Reduc
127	16.7	Width reduction when in a menu	TS 31.111 §5.2	R99	C274	PD_Width_Reduc
128	16.8	Width reduction when in a menu	TS 31.111 §5.2	R99	C274	PD_Width_Reduc
129	17.1	TCP, UICC in client mode	TS 31.111 §5.2	R99	C220	PD_TCP
130	17.2	UDP, UICC in client mode	TS 31.111 §5.2	R99	C221	PD_UDP
131	17.3	TCP, UICC in server mode (i.e. class "k" is supported)	TS 31.111 §5.2	Rel-7	C262	PD_TCP_UICC_ServerMode
132	17.4	TCP, Terminal in server mode (i.e. class "k" is supported)	TS 31.111 §5.2	Rel-7	C263	PD_TCP_Terminal_ServerMode
133	17.5	UDP, Terminal in server mode (i.e. class "k" is supported)	TS 31.111 §5.2	Rel-7	C264	PD_UDP_Terminal_ServerMode
134	17.6	Direct communication channel (i.e. class "k" is supported)	TS 31.111 §5.2	Rel-10	C284	Direct_Com_Channel
135	17.7	E- UTRAN (i.e. if class "e" is supported)	TS 31.111 §5.2	Rel-8	C275	PD_E_UTRAN
136	17.8	HSDPA supported by ME	TS 31.111 §5.2	Rel-6	C258	PD_ HSDPA
137	18.1	DISPLAY TEXT (Variable time out)	TS 31.111 §5.2	Rel-4	C229	PD_Disp_Var_Timeout
138	18.2	GET INKEY (help is supported while waiting for immediate response or variable time out)	TS 31.111 §5.2	Rel-4	C231	PD_Get_Inkey_Help
139	18.3	USB (Bearer Independent protocol supported bearers, class "e")	TS 31.111 §5.2	Rel-4	C232	PD_USB
140	18.4	GET INKEY (Variable time out)	TS 31.111 §5.2	Rel-4	C229 AND C267 AND C268	PD_Get_Inkey_Var_Timeout
141	18.5	Reserved for 3GPP2: PROVIDE LOCAL INFORMATION (ESN)	TS 31.111 §5.2	R99	O	Reserved
142	18.6	CALL CONTROL on GPRS	TS 31.111 §5.2	Rel-5	C242	PD_CC_GPRS
143	18.7	PROVIDE LOCAL INFORMATION (IMEISV)	TS 31.111 §5.2	Rel-6	M	PD_Provide_Local_SV
144	18.8	PROVIDE LOCAL INFORMATION (search mode change)	TS 31.111 §5.2	Rel-6	M	PD_Provide_Local_SMC
145	19.1	Protocol Version	TS 31.111 §5.2	R99	X	Reserved
146	19.2	Protocol Version	TS 31.111 §5.2	R99	X	Reserved
147	19.3	Protocol Version	TS 31.111 §5.2	R99	X	Reserved
148	19.4	Protocol Version	TS 31.111 §5.2	R99	X	Reserved
149	19.5	RFU	TS 31.111 §5.2	R99	X	PD_RFU_149
150	19.6	RFU	TS 31.111 §5.2	R99	X	PD_RFU_150
151	19.7	RFU	TS 31.111 §5.2	R99	X	PD_RFU_151
152	19.8	RFU	TS 31.111 §5.2	R99	X	PD_RFU_152
153	20.1	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
154	20.2	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
155	20.3	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
156	20.4	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
157	20.5	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
158	20.6	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
159	20.7	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
160	20.8	Reserved by TIA/EIA/IS-820 [25]	TS 31.111 §5.2	R99	X	Reserved
161	21.1	WML browser supported	TS 31.111 §5.2	Rel-6	C233 AND C267	PD_WML
162	21.2	XHTML browser supported	TS 31.111 §5.2	Rel-6	C234 AND C267	PD_XHTML
163	21.3	HTML browser supported	TS 31.111 §5.2	Rel-6	C235 AND C267	PD_HTML
164	21.4	CHTML browser supported	TS 31.111 §5.2	Rel-6	C236 AND C267	PD_CHTML
165	21.5	RFU	TS 31.111 §5.2	R99	X	PD_RFU_165
166	21.6	RFU	TS 31.111 §5.2	R99	X	PD_RFU_166
167	21.7	RFU	TS 31.111 §5.2	R99	X	PD_RFU_167
168	21.8	RFU	TS 31.111 §5.2	R99	X	PD_RFU_168
169	22.1	Support of UTRAN PS with extended parameters	TS 31.111 §5.2	Rel-6	C259	PD_UTRAN_PS_Ext_Param
170	22.2	PROVIDE LOCAL INFORMATION (Battery state) if class "g" supported	TS 31.111 §5.2	Rel-6	C239	PD_Provide_Local_Batt
171	22.3	PLAY TONE (Melody tones & themed tones supported)	TS 31.111 §5.2	Rel-6	C241	PD_M_T_Tones
172	22.4	Multi-media in SET UP CALL supported (if class "h" supported)	TS 31.111 §5.2	Rel-6	C240	PD_Xmedia_Call
173	22.5	Toolkit-initiated GBA	TS 31.111 §5.2	Rel-6	C266	PD_Toolkit_GBA
174	22.6	RETRIEVE MULTIMEDIA MESSAGE, (if class "j" is supported)	TS 31.111 §5.2	Rel-6	C238	PD_Retrieve_MMS
175	22.7	SUBMIT MULTIMEDIA MESSAGE, (if class "j" is supported)	TS 31.111 §5.2	Rel-6	C238	PD_Submit_MMS
176	22.8	DISPLAY MULTIMEDIA MESSAGE, (if class "j" is supported)	TS 31.111 §5.2	Rel-6	C238 AND C267	PD_Display_MMS
177	23.1	SET FRAMES supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C237	PD_Set_Frames
178	23.2	GET FRAMES STATUS supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C237	PD_Get_Frames_Stat
179	23.3	MMS notification download (if class "j" is supported)	TS 31.111 §5.2	Rel-6	C238	PD_MMS_Notification
180	23.4	Alpha Identifier in REFRESH command supported by terminal	TS 31.111 §5.2	Rel-7	C294	PD_Refresh_AlphaIdentifier
181	23.5	Geographical Location Reporting (if class "n" is supported)	TS 31.111 §5.2	Rel-8	C265	PD_Geo_Loaction_Reporting
182	23.6	Reserved for 3GPP2: PROVIDE LOCAL INFORMATION (MEID)	TS 31.111 §5.2	Rel-6	O	Reserved
183	23.7	PROVIDE LOCAL INFORMATION (NMR (UTRAN/E-UTRAN))	TS 31.111 §5.2	Rel-6	C278	PD_Provide_Local_NMR
184	23.8	USSD Data Download and application mode	TS 31.111 §5.2	Rel-6	C272	PD_USSD_DD
185	24.1	Maximum number of frames supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C256	PD_Max_Frames
186	24.2	Maximum number of frames supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C256	PD_Max_Frames
187	24.3	Maximum number of frames supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C256	PD_Max_Frames
188	24.4	Maximum number of frames supported (if class "i" supported)	TS 31.111 §5.2	Rel-6	C256	PD_Max_Frames
189	24.5	RFU	TS 31.111 §5.2	R99	X	PD_RFU_189
190	24.6	RFU	TS 31.111 §5.2	R99	X	PD_RFU_190
191	24.7	RFU	TS 31.111 §5.2	R99	X	PD_RFU_191
192	24.8	RFU	TS 31.111 §5.2	R99	X	PD_RFU_192
193	25.1	Event: browsing status	TS 31.111 §5.2	Rel-6	C212 AND C267 AND C268	PD_Browser_Stat
194	25.2	Event: MMS Transfer status (if class "j" is supported)	TS 31.111 §5.2	Rel-6	C238	PD_MMS
195	25.3	Event Frame parameters changed (if class "i" supported)	TS 31.111 §5.2	Rel-6	C237	PD_Event_Frames
196	25.4	Event: I-WLAN Access status (if class "e" is supported)	TS 31.111 §5.2	Rel-7	C260	PD_RFU_Event_I-WLAN
197	25.5	Event: Network Rejection	TS 31.111 §5.2	Rel-8	C279	PD_Event_NW_Rejection
198	25.6	Reserved by ETSI	TS 31.111 §5.2	Rel-7	O	PD_Reserved
199	25.7	Event: Network Rejection for E-UTRAN	TS 31.111 §5.2	Rel-8	C283	PD_ Event_NW_Rejection_E_UTRAN
200	25.8	Multiple access technologies supported in Event Access Technology Change and Provide Local Information	TS 31.111 §5.2	Rel-8	O	PD_Multiple_ACT
201	26.1	Event: CSG Cell Selection (if class "q" is supported)	TS 31.111 §5.2	Rel-9	C281	PD_Event_CSG_Cell_Selection
202	26.2	Reserved by ETSI	TS 31.111 §5.2	Rel-9	O	PD_Reserved
203	26.3	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_203
204	26.4	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_204
205	26.5	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_205
206	26.6	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_206
207	26.7	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_207
208	26.8	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_208
209	27.1	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_209
210	27.2	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_210
211	27.3	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_211
212	27.4	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_212
213	27.5	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_213
214	27.6	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_214
215	27.7	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_215
216	27.8	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_216
217	28.1	Alignment left supported	TS 31.111 §5.2	Rel-5	C243	PD_Text_Attrib_Left
218	28.2	Alignment center supported	TS 31.111 §5.2	Rel-5	C244	PD_Text_Attrib_Center
219	28.3	Alignment right supported	TS 31.111 §5.2	Rel-5	C245	PD_Text_Attrib_Right
220	28.4	Font size normal supported	TS 31.111 §5.2	Rel-5	C246	PD_Text_Attrib_Normal
221	28.5	Font size large supported	TS 31.111 §5.2	Rel-5	C247	PD_Text_Attrib_Large
222	28.6	Font size small supported	TS 31.111 §5.2	Rel-5	C248	PD_Text_Attrib_Small
223	28.7	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_223
224	28.8	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_224
225	29.1	Style normal supported	TS 31.111 §5.2	Rel-5	C249	PD_Text_Attrib_Styl_Norm
226	29.2	Style bold supported	TS 31.111 §5.2	Rel-5	C250	PD_Text_Attrib_Styl_Bold
227	29.3	Style italic supported	TS 31.111 §5.2	Rel-5	C251	PD_Text_Attrib_Styl_Italic
228	29.4	Style underlined supported	TS 31.111 §5.2	Rel-5	C252	PD_Text_Attrib_Styl_Underl
229	29.5	Style strikethrough supported	TS 31.111 §5.2	Rel-5	C253	PD_Text_Attrib_Styl_Strik
230	29.6	Style text foreground colour supported	TS 31.111 §5.2	Rel-5	C254	PD_Text_Attrib_Styl_Text_Fore
231	29.7	Style text background colour supported	TS 31.111 §5.2	Rel-5	C255	PD_Text_Attrib_Styl_Text_Back
232	29.8	RFU	TS 31.111 §5.2	Rel-6	X	PD_RFU_224
233	30.1	I-WLAN bearer support (if class "e" is supported)	TS 31.111 §5.2	Rel-7	C260	PD_I-WLAN
234	30.2	Proactive UICC: PROVIDE LOCAL INFORMATION (WSID of the current I-WLAN connection)	TS 31.111 §5.2	Rel-7	C260	PD_Provide_Local_WSID_WLAN
235	30.3	TERMINAL APPLICATIONS (i.e. class "k" is supported)	TS 31.111 §5.2	Rel-7	C261	PD_Terminal_Applications
236	30.4	"Steering of Roaming" REFRESH support	TS 31.111 §5.2	Rel-7	M	PD_Steering_Of_Roaming
237	30.5	Reserved by ETSI	TS 31.111 §5.2	Rel-7	O	PD_Reserved
238	30.6	Proactive UICC: Geographical Location Request (if class "n" is supported)	TS 31.111 §5.2	Rel-8	C265	PD_Geo_Loaction_Request
239	30.7	Reserved by ETSI	TS 31.111 §5.2	Rel-8	O	PD_Reserved
240	30.8	"Steering of Roaming for I-WLAN" REFRESH support	TS 31.111 §5.2	Rel-8	C260	PD_Steering_Of_Roaming _I-WLAN
241	31.1	Reserved by ETSI	TS 31.111 §5.2	Rel-9	O	PD_Reserved
242	31.2	Support of CSG cell discovery (if class "q" is supported)	TS 31.111 §5.2	Rel-9	C282	PS_CSG_Cell_Discovery
243	31.3	Confirmation parameters supported for OPEN CHANNEL in Terminal Server Mode	TS 31.111 §5.2	Rel-9	C285	PD_Open_Channel_Conf_Parameters
244	31.4	Communication Control for IMS	TS 31.111 §5.2	Rel-10	C286	PD_IMS_COMMUNICATION_CONTROL
245	31.5	Support of CAT over the modem interface (if class "s" is supported)	TS 31.111 §5.2	Rel-10	C287	PD_CAT_Modem_Interface
246	31.6	Support for Incoming IMS Data event (if classes "e" and "t" are supported)	TS 31.111 §5.2	Rel-10	C288	PD_Incoming_IMS_Data_Event
247	31.7	Support for IMS Registration event (if classes "e" and "t" are supported)	TS 31.111 §5.2	Rel-10	C289	PD_IMS_Reg_Event
248	31.8	Reserved by ETSI	TS 31.111 §5.2	Rel-10	O	PD_Reserved
249	32.1	IMS support (if class "e" and "t" are supported)	TS 31.111 §5.2	Rel-10	C290	PD_UICC_ACCESS_IMS
250	32.2	PROVIDE LOCATION INFORMATION, H(e)NB IP address support (if class "v" is supported))	TS 31.111 §5.2	Rel-11	X	PD_PLI_HENB_IP_Adress_support
251	32.3	PROVIDE LOCATION INFORMATION, H(e)NB surrounding macrocells support (if class "w" is supported)	TS 31.111 §5.2	Rel-11	X	PD_PLI_HENB_surrounding_Macrocell
252	32.4	Reserved by ETSI	TS 31.111 §5.2	Rel-11	O	PD_Reserved
253	32.5	Reserved by ETSI	TS 31.111 §5.2	Rel-11	O	PD_Reserved
254	32.6	Reserved by ETSI	TS 31.111 §5.2	Rel-11	O	PD_Reserved
255	32.7	Reserved by ETSI	TS 31.111 §5.2	Rel-11	O	PD_Reserved
256	32.8	Reserved by ETSI (Support of refresh enforcement policy)	TS 31.111 §5.2	Rel-12	M	PD_ Refresh_Enforcement_Policy
257	33.1	Reserved by ETSI	TS 31.111 §5.2	Rel-12	O	PD_Reserved
258	33.2	Reserved by ETSI	TS 31.111 §5.2	Rel-12	O	PD_Reserved
259	33.3	Reserved by ETSI	TS 31.111 §5.2	Rel-12	O	PD_Reserved
260	33.4	ProSe usage information reporting (used only if class "e" is supported)	TS 31.111 §5.2	Rel-12	C295	PD_ProSE
261	33.5	Reserved by ETSI	TS 31.111 §5.2	Rel-12	O	PD_Reserved
262	33.6	Event: WLAN Access status (if class "e" is supported)	TS 31.111 §5.2	Rel-13	C296	PD_WLAN_Access_St
263	33.7	WLAN bearer support (if class "e" is supported)	TS 31.111 §5.2	Rel-13	C297	PD_WLAN_Bearer
264	33.8	Proactive UICC: PROVIDE LOCAL INFORMATION (WLAN identifier of the current WLAN connection)	TS 31.111 §5.2	Rel-13	C298	PD_ Provide_Local_WLAN_ID
265	34.1	URI support for SEND SHORT MESSAGE	TS 31.111 §5.2	Rel-13	C299	PD_URI_Send_Short_IMS
266	34.2	IMS URI supported for SET UP CALL	TS 31.111 §5.2	Rel-13	C300	PD_IMS_URI_Setup_call
267	34.3	Media Type "Voice" supported for SET UP CALL and Call Control by USIM	TS 31.111 §5.2	Rel-13	C301	PD_Voice_Media_ USIM
268	34.4	Media Type "Video" supported for SET UP CALL and Call Control by USIM	TS 31.111 §5.2	Rel-13	C302	PD_Video_Media_USIM
269	34.5	Proactive UICC: PROVIDE LOCAL INFORMATION (E-UTRAN Timing Advance Information)	TS 31.111 §5.2	Rel-13	C283	PD_ Provide_Local_EUTRAN_TA
270	34.6	Reserved by ETSI	TS 31.111 §5.2	Rel-13	O	PD_Reserved
271	34.7	Extended Rejection Cause Code in Event: Network Rejection for E-UTRAN	TS 31.111 §5.2	Rel-14	O	PD_EUTRAN_Extended_Reject_Cause_Code
272	34.8	Reserved by ETSI	TS 31.111 §5.2	Rel-13	O	PD_Reserved
273	35.1	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
274	35.2	Data Connection Status Change Event support – PDP Connection (if class "e" is supported)	TS 31.111 §5.2	Rel-14	C305	PD_Data_Connection_Status_Change_PDP
275	35.3	Data Connection Status Change Event support – PDN Connection (if class "e" is supported)	TS 31.111 §5.2	Rel-14	C283	PD_Data_Connection_Status_Change_PDN
276	35.4	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
277	35.5	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
278	35.6	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
279	35.7	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
280	35.8	Reserved by ETSI	TS 31.111 §5.2	Rel-14	O	PD_Reserved
281	36.1	Data Connection Status Change Event support – PDU Connection	TS 31.111 §5.2	Rel-15	C310	PD_Data_Connection_Status_Change_PDU
282	36.2	Event: Network Rejection for NG-RAN	TS 31.111 §5.2	Rel-15	C310	PD_Event_NW_Rejection_NR
283	36.3	Non-IP Data Delivery support (if class "e" and class "ai" are supported)	TS 31.111 §5.2	Rel-15	C311	PD_Non_IP_Data_Delivery
284	36.4	Support of PROVIDE LOCAL INFORMATION, Slice information	TS 31.111 §5.2	Rel-16	C310	PD_PLI_Slice_Information
285	36.5	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
286	36.6	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
287	36.7	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
288	36.8	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
289	37.1	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
290	37.2	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
291	37.3	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
292	37.4	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
293	37.5	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
294	37.6	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
295	37.7	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
296	37.8	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
297	38.1	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
298	38.2	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
299	38.3	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
300	38.4	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
301	38.5	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
302	38.6	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
303	38.7	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
304	38.8	Reserved by ETSI	TS 31.111 §5.2	Rel-15	X
305	39.1	Proactive UICC: PROVIDE LOCAL INFORMATION (NG-RAN Timing Advance Information)	TS 31.111 §5.2	Rel-16	C310	PD_Provide_Local_NR_TA
306	39.2	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
307	39.3	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
308	39.4	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
309	39.5	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
310	39.6	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
311	39.7	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X
312	39.8	Reserved by ETSI	TS 31.111 §5.2	Rel-16	X

C201	Void	— Void
C202	Void	— Void
C203	IF A.1/3 THEN M ELSE O.1	— O_Ucs2_Entry
C204	IF A.1/15 THEN M ELSE O.1	— O_Ucs2_Disp
C205	Void	— Void
C206	IF A.1/7 THEN M ELSE O.1	— O_Dual_Slot
C207	IF A.1/12 THEN M ELSE O.1	— O_BIP_CSD
C208	IF (A.1/7 AND A.1/8) THEN M ELSE O.1	— O_Dual_Slot AND O_Detach_Rdr
C209	IF A.1/9 THEN M ELSE O.1	— O_Run_At
C210	Void	— Void
C211	Void	— Void
C212	IF A.1/10 THEN M ELSE O.1	— O_LB
C213	IF A.1/11 AND A.1/85 THEN M for at least one of the bits 1 – 2 of byte 10	— O_Soft_key AND O_No_Type_NK
C214	IF C213 THEN M for at least one, but not for all of the bits 1 – 8 of byte 11	— O_Soft_key AND O_No_Type_NK (parameters)
C215	Void	— Void
C216	IF A.1/13 AND A.1/84 THEN M ELSE O.1	— O_Scr_Siz AND O_No_Type_ND
C217	Void	— Void
C218	IF A.1/14 AND A.1/84 THEN M ELSE O.1	— O_Scr_Resiz AND O_No_Type_ND
C219	Void	— Void
C220	IF A.1/18 THEN M ELSE O.1	— O_TCP
C221	IF A.1/17 THEN M ELSE O.1	— O_UDP
C222	IF A.1/21 THEN M ELSE O.1	— O_BIP_GPRS
C223	IF (A.1/12 OR A.1/21 OR A.1/148 OR A.1/132 OR A.1/133 OR (A.1/26 AND (A.1/27 OR A.1/28 OR A.1/29 OR A.1/30))) THEN M ELSE O.1	— O_BIP_CSD OR O_BIP_GPRS OR O_UICC_ACCESS_IMS OR pc_BIP_eFDD OR pc_BIP_eTDD OR (O_BIP_Local AND (O_BT OR O_IrDA OR O_RS232 OR O_USB))
C224	IF (A1.26 AND (A.1/27 OR A.1/28 OR A.1/29 OR A.1/30)) THEN M ELSE O.1	— O_BIP_Local AND (O_BT OR O_IrDA OR O_RS232 OR O_USB)
C225	IF A.1/26 AND A1.27 THEN M ELSE O.1	— O_BIP_Local AND O_BT
C226	IF A.1/26 AND A1.28 THEN M ELSE O.1	— O_BIP_Local AND O_IrDA
C227	IF A.1/26 AND A1.29 THEN M ELSE O.1	— O_BIP_Local AND O_RS232
C228	IF (A.1/50 OR A.1/51 OR A.1/52 OR A.1/53 OR A.1/54 OR A.1/55 OR A.1/56 OR A.1/57 OR A.1/58 OR A.1/59 OR A.1/60 OR A.1/61 OR A.1/62) AND A.1/84 THEN M ELSE O.1	— (O_TAT_AL OR O_TAT_AC OR O_TAT_AR OR O_TAT_FSN OR O_TAT_FSL OR O_TAT_FSS OR O_TAT_SN OR O_TAT_SB OR O_TAT_SI OR O_TAT_SU OR O_TAT_SS OR O_TAT_STFC OR O_TAT_STFB) AND O_No_Type_ND
C229	IF A.1/24 AND A.1/84 THEN M ELSE O.1	— O_Duration AND O_No_Type_ND
C230	Void	— Void
C231	IF (C229 OR (A.1/23 AND A.1/85)) AND A.1/5 THEN M ELSE O.1	— O_Help AND ((O_Duration AND O_No_Type_ND) OR (O_Imm_Resp AND O_No_Type_NK))
C232	IF A.1/26 AND A.1/30 THEN M ELSE O.1	— O_BIP_Local AND O_USB
C233	IF A.1/31 THEN M ELSE O.1	— O_WML
C234	IF A.1/32 THEN M ELSE O.1	— O_XHTML
C235	IF A.1/33 THEN M ELSE O.1	— O_HTML
C236	IF A.1/34 THEN M ELSE O.1	— O_CHTML
C237	IF A.1/37 AND A.1/84 THEN M ELSE O.1	— O_Frames AND O_No_Type_ND
C238	IF A.1/38 THEN M ELSE O.1	— O_MMS
C239	IF A.1/35 THEN M ELSE O.1	— O_Batt
C240	IF A.1/36 AND A.1/84 AND A.1/85 AND A.1/87 THEN M ELSE O.1	— O_Xmedia_Call AND O_No_Type_ND AND O_No_Type_NK AND O_No_Type_NS
C241	IF A.1/82 AND A.1/86 THEN M ELSE O.1	— O_M_T_Tones AND O_No_Type_NA
C242	IF A.1/16 AND A.1/84 THEN M ELSE O.1	— O_GPRS AND O_No_Type_ND
C243	IF A.1/50 AND A.1/84 THEN M ELSE O.1	— O_TAT_AL AND O_No_Type_ND
C244	IF A.1/51 AND A.1/84 THEN M ELSE O.1	— O_TAT_AC AND O_No_Type_ND
C245	IF A.1/52 AND A.1/84 THEN M ELSE O.1	— O_TAT_AR AND O_No_Type_ND
C246	IF A.1/53 AND A.1/84 THEN M ELSE O.1	— O_TAT_FSN AND O_No_Type_ND
C247	IF A.1/54 AND A.1/84 THEN M ELSE O.1	— O_TAT_FSL AND O_No_Type_ND
C248	IF A.1/55 AND A.1/84 THEN M ELSE O.1	— O_TAT_FSS AND O_No_Type_ND
C249	IF A.1/56 AND A.1/84 THEN M ELSE O.1	— O_TAT_SN AND O_No_Type_ND
C250	IF A.1/57 AND A.1/84 THEN M ELSE O.1	— O_TAT_SB AND O_No_Type_ND
C251	IF A.1/58 AND A.1/84 THEN M ELSE O.1	— O_TAT_SI AND O_No_Type_ND
C252	IF A.1/59 AND A.1/84 THEN M ELSE O.1	— O_TAT_SU AND O_No_Type_ND
C253	IF A.1/60 AND A.1/84 THEN M ELSE O.1	— O_TAT_SS AND O_No_Type_ND
C254	IF A.1/61 AND A.1/84 THEN M ELSE O.1	— O_TAT_STFC AND O_No_Type_ND
C255	IF A.1/62 AND A.1/84 THEN M ELSE O.1	— O_TAT_STFB AND O_No_Type_ND
C256	IF C237 THEN M for at least one of the bits 1 – 4 of byte 24	— O_Frames AND O_No_Type_ND
C257	IF (A.1/12 OR A.1/21 OR A.1/132 OR A.1/133 OR A.1/148 OR (A1.26 AND (A.1/27 OR A.1/28 OR A.1/29 OR A.1/30))) THEN M for at least one of the bits 6 – 8 of byte 13	— O_BIP_CSD OR O_BIP_GPRS OR pc_BIP_eFDD OR pc_BIP_eTDD OR O_UICC_ACCESS_IMS OR (O_BIP_Local AND (O_BT OR O_IrDA OR O_RS232 OR O_USB))
C258	IF A.1/66 THEN M ELSE O.1	— O_HSDPA
C259	IF A.1/67 THEN M ELSE O.1	— O_UTRAN_PS_Ext_Param
C260	IF A.1/70 THEN M ELSE O.1	— O_I-WLAN
C261	IF A.1/71 THEN M ELSE O.1	— O_Terminal_Applications
C262	IF A.1/72 THEN M ELSE O.1	— O_TCP_UICC_ServerMode
C263	IF A.1/73 THEN M ELSE O.1	— O_TCP_Terminal_ServerMode
C264	IF A.1/74 THEN M ELSE O.1	— O_UDP_Terminal_ServerMode
C265	IF A.1/81 THEN M ELSE O.1	— O_Geo_Location_Discovery
C266	IF A.1/83 THEN M ELSE O.1	— O_Toolkit_GBA
C267	IF A.1/84 THEN M ELSE O.1	— O_No_Type_ND
C268	IF A.1/85 THEN M ELSE O.1	— O_No_Type_NK
C269	IF A.1/86 THEN M ELSE O.1	— O_No_Type_NA
C270	IF A.1/87 THEN M ELSE O.1	— O_No_Type_NS
C271	IF (A.1/88 AND A.1/161) THEN M ELSE O.1	— O_No_Type_NL AND O_Lang_Select
C272	IF A.1/89 THEN M ELSE O.1	— O_USSD_Data_DL
C273	IF A.1/84 THEN O ELSE O.1	— O_No_Type_ND
C274	IF A.1/84 THEN bit values "0" / "1" allowed ELSE O.1	— O_No_Type_ND
C275	IF (A.1/132 OR A.1/133) THEN M ELSE O.1	— pc_BIP_eFDD OR pc_BIP_eTDD
C276	IF A.1/84 THEN O.1 ELSE M	— O_No_Type_ND
C277	IF A.1/85 THEN O.1 ELSE M	— O_No_Type_NK
C278	IF (A.1/134 OR A.1/139 OR A.1/140) THEN M ELSE O.1	— O_UTRAN OR pc_eFDD OR pc_eTDD
C279	IF NOT A.1/135 THEN M ELSE O	— O_EUTRAN_NO_UTRAN_NO_GERAN
C280	IF A.1/64 THEN M ELSE O	— O_GERAN
C281	IF A.1/136 THEN M ELSE O.1	— O_Event_CSG_Cell_Selection
C282	IF A.1/137 THEN M ELSE O.1	— O_CSG_Cell_Discovery
C283	IF (A.1/139 OR A.1/140) THEN M ELSE O.1	— pc_eFDD OR pc_eTDD
C284	IF A.1/143 THEN M ELSE O.1	— O_Direct_Com_Channel
C285	IF A.1/73 AND A.1/84 AND A.1/85 THEN M ELSE O.1	— O_TCP_Terminal_ServerMode AND O_No_Type_ND AND O_No_Type_NK
C286	IF A.1/144 THEN M ELSE O.1	— O_CC_IMS
C287	IF A.1/145 THEN M ELSE O.1	— O_CAT_Modem_Interface
C288	IF A.1/146 THEN M ELSE O.1	— O_Event_Incoming_IMS_Data
C289	IF A.1/147 THEN M ELSE O.1	— O_Event_IMS_Registration
C290	IF A.1/148 THEN M ELSE O.1	— O_UICC_ACCESS_IMS
C291	IF A.1/84 AND A.1/85 AND A.1/87 AND (NOT A.1/135) THEN M ELSE O	— O_No_Type_ND AND O_No_Type_NK AND O_No_Type_NS AND (NOT O_EUTRAN_NO_UTRAN_NO_GERAN)
C292	IF A.1/162 THEN M ELSE O.1	— O_Provide_Local_LS
C293	IF A.1/88 AND A.1/163 THEN M ELSE O.1	— O_No_Type_NL AND O_Lang_Notif
C294	IF A.1/84 AND A.1/164 THEN M ELSE O.1	— O_No_Type_ND AND O_Refresh_AlphaIdentifier
C295	IF A.1/165 THEN M ELSE O.1	— O_ProSE
C296	IF A.1/166 THEN M ELSE O.1	— O_WLAN_Access_Status
C297	IF A.1/167 THEN M ELSE O.1	— O_WLAN_Bearer
C298	IF A.1/168 THEN M ELSE O.1	— O_I-WLAN_OR_WLAN
C299	IF A.1/150 AND A.1/179 THEN M ELSE O.1	— O_IMS AND O_SM-over-IP_without_MSISDN
C300	IF A.1/150 AND A.1/84 AND A.1/85 AND A.1/87 AND A.1/180 THEN M ELSE O.1	— O_IMS AND O_No_Type_ND AND O_No_Type_NK AND O_No_Type_NS AND O_Voice_Call_with_URI
C301	IF A.1/169 THEN M ELSE O.1	— O_Media_Type_Voice
C302	IF A.1/170 THEN M ELSE O.1	— O_Media_Type_Video
C303	Void
C304	IF A.1/87 THEN M ELSE O.1	— O_No_Type_NS
C305	IF (A.1/64 OR A.1/134) THEN M ELSE O	— O_GERAN OR O_UTRAN
C306	IF A.1/186 THEN O ELSE M	— O_NB-IoT_only
C307	IF A.1/189 THEN M ELSE O.1	— O_PLI_HeNB_IP_Address
C308	IF A.1/190 THEN M ELSE O.1	— O_PLI_HeNB_Sur_Macrocells
C310	IF A.1/187 THEN M ELSE O.1	— pc_NG_RAN_NR
C311	IF A.1/192 THEN M ELSE O.1	— O_NIDD
C312	IF A.1/193 THEN M ELSE O.1	— O_PLI_Slices_Information
O.1	Allowed: Bit value ="0" or bit not present

Annex C (informative):
Change history

Meeting	Meeting	CP-doc	CR	REV	CAT	SUBJECT	NEW_VERS
2.0.0	2.0.0	TP-050016	–	–		Approved TP-27, March 2005	6.0.0
CT-28	CT-28	CP-050144	0001	–	F	Correction of coding in MT Call Event	6.1.0
CT-28	CT-28	CP-050144	0002	–	F	Correction of applicability table	6.1.0
CT-28	CT-28	CP-050144	0003	–	F	Essential Corrections	6.1.0
CT-28	CT-28	CP-050144	0004	–	F	Correction of coding in MT Call Event	6.1.0
CT-28	CT-28	CP-050144	0005	–	F	Removal of GET RESPONSE references	6.1.0
CT-29	CT-29	CP-050447	0006	–	F	Rel-6: Correction of release dependent EF values	6.2.0
CT-29	CT-29	CP-050447	0007	–	F	Correction of applicability and terminal profile support tables	6.2.0
CT-29	CT-29	CP-050447	0008	–	F	Correction of EF_BDN coding	6.2.0
CT-29	CT-29	CP-050447	0009	–	F	Incorrect Dialling Number string in clause 27.22.4.13.1 SEQ 1.9 for PCS 1900	6.2.0
CT-29	CT-29	CP-050447	0010	–	f	Essential corrections in display icons Setup Menu and Select Item	6.2.0
CT-29	CT-29	CP-050447	0011	–	F	Incorrect Ti Flag value for SET UP 1.4.1 in clause 27.22.4.16.1	6.2.0
CT-29	CT-29	CP-050447	0012	–	F	Correction of TP-MR (TP Message Reference) of the SMS SUBMIT TPDU submitted to the USS (Network)	6.2.0
CT-29	CT-29	CP-050447	0013	–	F	Corrections in the Logical description and BER encoding in clause 27.22.6.2 and 27.22.4.11	6.2.0
CT-29	CT-29	CP-050447	0014	–	F	Incorrect DCS in SMS-CB data download tests	6.2.0
CT-29	CT-29	CP-050447	0015	–	F	Essential Corrections in clause 27.22.8 MO SHORT MESSAGE CONTROL BY USIM	6.2.0
CT-29	CT-29	CP-050447	0016	–	B	Introduction of BDN tests for terminals not supporting BDN	6.2.0
CT-29	CT-29	CP-050447	0017	–	F	Essential Corrections	6.2.0
CT-29	CT-29	CP-050447	0018	–	F	Incorrect SMS-PP 1.4.1 TPDU in clause 27.22.4.22.1	6.2.0
CT-29	CT-29	CP-050447	0019	–	F	Missing interactions in Bearer Independent Protocol test cases	6.2.0
CT-29	CT-29	CP-050447	0020	–	F	Correction of Refresh tests	6.2.0
CT-29	CT-29	CP-050447	0022	–	F	Applicability of TC 27.22.4.7.1 and TCs related to FDN and BDN	6.2.0
CT-29	CT-29	CP-050447	0023	–	F	Essential correction to Terminal Profile table E.1	6.2.0
CT-29	CT-29	CP-050447	0024	–	F	Correction of CB message identifier	6.2.0
CT-29	CT-29	CP-050447	0025	–	B	Rel-6: Addition of new UCS2 Tests	6.2.0
CT-29	CT-29	CP-050447	0027	–	F	Incorrect Coding of SMS-PP (Data download) Message in clause 27.22.4.7.1 and 27.22.5.1	6.2.0
–	–	–	–	–	–	2005-10: Editorial corrections due to the CRs approved at CP-29	6.2.1
CT-30	CT-30	CP-050495	0028	–	F	Correction of Send SS (UCS2) tests	6.3.0
CT-30	CT-30	CP-050495	0029	–	F	Essential Corrections in clause 27.22.4.11	6.3.0
CT-30	CT-30	CP-050495	0030	–	F	Corrections to Select Item (icons support)	6.3.0
CT-30	CT-30	CP-050495	0031	–	F	27.22.7.4.1 Location Status Event (normal)	6.3.0
CT-30	CT-30	CP-050495	0032	–	F	Essential Corrections of Set Up Menu test	6.3.0
CT-30	CT-30	CP-050495	0033	–	F	Correction of applicability table and related addition of missing test sequences	6.3.0
CT-30	CT-30	CP-050495	0034	–	F	Correction in SMS-PP 1.4.1 TPDU of clause 27.22.4.22.1	6.3.0
CT-30	CT-30	CP-050495	0035	–	F	Essential Corrections of SMS-PP download message in Refresh test case	6.3.0
CT-30	CT-30	CP-050495	0036	–	F	Essential Correction in MO SHORT MESSAGE CONTROL BY USIM Deletion of sequence 1.9	6.3.0
CT-30	CT-30	CP-050495	0037	–	F	Deletion of SEQ 1.3 in clause 27.22.4.13.1	6.3.0
CT-31	CT-31	CP-060013	0041	–	F	Deletion of Send Data test sequence	6.4.0
CT-31	CT-31	CP-060013	0042	–	F	Essential correction of Provide Local Information (IMEI) test	6.4.0
CT-31	CT-31	CP-060013	0044	–	F	Essential Correction in SEQ 1.8 of clause 27.22.8	6.4.0
CT-31	CT-31	CP-060013	0045	–	F	Essential correction on 27.22.7.3.1 Call Disconnected Event	6.4.0
CT-31	CT-31	CP-060013	0050	–	F	Essential correction of Channel Data length in clause 27.22.4.30	6.4.0
CT-31	CT-31	CP-060014	0048	–	F	Essential Corrections in clause 27.22.4.11	6.4.0
CT-31	CT-31	CP-060014	0052	–	F	Essential Corrections in clause 27.22.8 MO SHORT MESSAGE CONTROL BY SIM	6.4.0
CT-31	CT-31	CP-060014	0049	–	F	Essential correction in SEQ 1.4 of clause 27.22.4.11.1 SEND SS (normal)	6.4.0
CT-31	CT-31	CP-060014	0047	–	F	Essential corrections of Run AT Command tests	6.4.0
CT-31	CT-31	CP-060014	0053	–	F	Essential corrections to SET UP CALL test sequences	6.4.0
CT-31	CT-31	CP-060015	0055	–	F	Essential Correction in TERMINAL RESPONSE coding of clause 27.22.4.31	6.4.0
CT-31	CT-31	CP-060015	0056	–	F	Essential corrections to Timer Expiration tests	6.4.0
CT-31	CT-31	CP-060015	0054	–	F	BER-TLV suppressions	6.4.0
CT-31	CT-31	CP-060157	0059	–	B	Add SMS PP Data Download RP-ERROR Test Case	6.4.0
CT-31	CT-31	CP-060022	0043	–	F	Essential Correction in SEQ 1.7 of clause 27.22.4.13.1	6.4.0
CT-31	CT-31	CP-060022	0046	–	F	Essential correction of Refresh test	6.4.0
CT-31	CT-31	CP-060022	0051	–	F	Essential correction of Channel Data length in Result TLV of clause 27.22.4.30	6.4.0
CT-31	CT-31	CP-060022	0060	–	F	CR 31.124 Rel-6: Insertion of missing REFRESH (IMSI changing procedure) test cases	6.4.0
CT-31	CT-31	CP-060022	0057	–	F	Essential corrections of references	6.4.0
CT-32	CT-32	CP-060241	0061	–		Proposal to the TS 31.124 Split by referencing the relevant USAT Test procedures to TS 102 384	6.5.0
CT-32	CT-32	CP-060241	0062	–		Essential corrections on test cases 27.22.6.3 and 27.22.6.4 using record 2 in EF FDN	6.5.0
CT-32	CT-32	CP-060241	0063	–		Essential corrections on TC 27.22.6.4 sequence 4.1	6.5.0
CT-32	CT-32	CP-060241	0064	–		Essential corrections on SEND SHORT MESSAGE test cases	6.5.0
CT-32	CT-32	CP-060241	0065	–		Essential correction of text attributes tests	6.5.0
CT-32	CT-32	CP-060241	0066	–		Definition of appropriate QoS in BIP test cases related to GPRS for 3G	6.5.0
CT-32	CT-32	CP-060241	0071	–		Essential correction of Refresh test in 27.22.7.4.2, seq. 2.4	6.5.0
CT-32	CT-32	CP-060241	0074	–		Essential corrections of RUN AT Command tests	6.5.0
CT-32	CT-32	CP-060241	0067	–		Essential correction of tables B.1 and E.1	6.5.0
CT-32	CT-32	CP-060242	0068	–	F	Essential Correction in REGISTER 1.2B message coding of clause 27.22.4.11.1 SEND SS (normal)	6.5.0
CT-32	CT-32	CP-060242	0069	–	F	Essential correction of 27.22.4.13.1 SET UP CALL, seq 1.4	6.5.0
CT-32	CT-32	CP-060242	0070	–	F	Essential correction of second card reader test applicability	6.5.0
CT-32	CT-32	CP-060242	0072	–	F	Correction of TON/NPI coding for Call Control Test case	6.5.0
CT-32	CT-32	CP-060242	0073	–	F	Essential corrections on 27.22.4.11.1 sequence. 1.2	6.5.0
CT-32	CT-32	CP-060242	0075	–	F	Essential correction of BIP tests	6.5.0
CT-33	CT-33	CP-060389	0082	1	F	Wrong reference inside test requirement of TC 27.22.7.2.2	6.6.0
CT-33	CT-33	CP-060389	0087	1	F	Essential corrections of applicability table	6.6.0
CT-33	CT-33	CP-060389	0088	1	F	Essential correction of IMEISV coding for Provide Local Information	6.6.0
CT-33	CT-33	CP-060389	0089	1	F	Essential corrections of text attribute tests for Send USSD and Close channel	6.6.0
CT-33	CT-33	CP-060389	0090	1	F	Proposal to the TS 31.124 Split by referencing the relevant USAT Test procedures to TS 102 384	6.6.0
CT-33	CT-33	CP-060389	0091	1	F	Correction to the UCS2 coding in Setup Call test	6.6.0
CT-33	CT-33	CP-060389	0092	1	F	Essential correction of RUN AT Command for text attribute tests	6.6.0
CT-33	CT-33	CP-060389	0095	1	F	Correction of RECEIVE DATA tests	6.6.0
CT-33	CT-33	CP-060389	0096	1	F	Correction of terminology for USIM Service Table	6.6.0
CT-33	CT-33	CP-060389	0097	1	F	Correction of 2^nd alpha identifier usages in SET UP CALL tests	6.6.0
CT-33	CT-33	CP-060389	0098	1	F	Correction of various typographical errors	6.6.0
CT-33	CT-33	CP-060389	0101	1	F	Essential corrections to OPEN CHANNEL text attribute test sequences	6.6.0
CT-33	CT-33	CP-060389	0078	1	F	Correction of ‘Precedence class’ values in Bearer Independent Protocol test cases	6.6.0
CT-33	CT-33	CP-060389	0076	1	F	Essential corrections on PROVIDE LOCAL INFORMATION test sequences	6.6.0
CT-33	CT-33	CP-060389	0080	2	F	Essential corrections on test sequences using the TLV data object Location Information	6.6.0
CT-33	CT-33	CP-060389	0100	2	F	Essential corrections to SET UP CALL (UCS2 Display) test sequences	6.6.0
CT-33	CT-33	CP-060389	0081	3	F	Essential corrections to REFRESH(normal) test sequence	6.6.0
CT-33	CT-33	CP-060389	0102	1	F	Essential corrections to SEND SS display tests concerning longForwardedToNumber	6.6.0
CT-33	CT-33	CP-060475	0086	1	F	Essential corrections of MMI entries in table E.1	6.6.0
CT-33	CT-33	CP-060475	0077	2	F	Corrections to SET UP CALL test case 27.22.4.13.1	6.6.0
CT-33	CT-33	CP-060475	0099	1	F	Essential corrections to SEND SS concerning longForwardedToNumber	6.6.0
CT-33	CT-33	CP-060475	0094	2	F	Corrections to MO SHORT MESSAGE CONTROL BY USIM tests	6.6.0
CT-33	CT-33	CP-060517	0084	1	F	Essential corrections Set Up Call, seq. 1.9	6.6.0
CT-34	CT-34	CP-060540	0103	–	F	Correction of APN Coding in Open Channel test case	6.7.0
CT-34	CT-34	CP-060540	0085	2	F	Essential corrections of BIP entries in table E.1	6.7.0
CT-34	CT-34	CP-060540	0110	2	F	Essential correction of Result TLV handling	6.7.0
CT-34	CT-34	CP-060540	0111	–	F	Essential correction of expected sequence in OPEN CHANNEL test case	6.7.0
CT-34	CT-34	CP-060727	0105	–	F	Some of the Applicability table content is missing when printed or in Print Layout mode	6.7.0
CT-34	CT-34	CP-060727	0106	1	F	Correction to SET UP CALL	6.7.0
CT-34	CT-34	CP-060727	0107	–	F	Correction to SEND SS	6.7.0
CT-34	CT-34	CP-060727	0058	1	B	Addition of REFRESH USIM Application Reset	6.7.0
CT-34	CT-34	CP-060727	0108	–	F	Essential corrections on SEND SS (UCS2 display) test cases	6.7.0
CT-34	CT-34	CP-060727	0109	–	F	Essential corrections on REFRESH TC 27.22.4.7.1	6.7.0
CT-34	CT-34	CP-060727	0104	1	F	Corrections in the interpretation of Katakana Character	6.7.0
CT-35	CT-35	CP-070063	0115	–	F	Essential correction of 27.22.5.2	6.8.0
CT-35	CT-35	CP-070063	0113	1	F	Essential correction of Terminal Profile Support table	6.8.0
CT-35	CT-35	CP-070063	0112	1	F	Essential correction of 27.22.4.13.1 Expected Sequence 1.7	6.8.0
CT-35	CT-35	CP-070065	0116	–	F	Essential correction of 27.22.4.7, seq. 1.7	6.8.0
CT-35	CT-35	CP-070065	0119	–	F	Essential correction of TC 27.22.7.4.1	6.8.0
CT-35	CT-35	CP-070065	0120	–	F	CR implementation error correction for 27.22.6.2 SEQ 2.2	6.8.0
CT-35	CT-35	CP-070065	0121	–	F	CR implementation error correction for 27.22.4.11.1 SEQ 1.4A	6.8.0
CT-35	CT-35	CP-070065	0117	1	F	Essential clarification of Network Simulator selection	6.8.0
CT-35	CT-35	CP-070065	0122	1	F	Essential correction of 27.22.4.7.2 SEQ 2.2	6.8.0
CT-35	CT-35	CP-070065	0124	2	C	Addition of new expected sequence to the SMS-PP Data Download test case	6.8.0
CT-35	CT-35	CP-070065	0125	2	F	Addition of a new expected sequence to the SMS-CB Data Download test case	6.8.0
CT-36	CT-36	CP-070297	0127	2	F	Essential correction of test case applicability	6.9.0
CT-36	CT-36	CP-070297	0128	–	F	Correction of 27.22.4.2 applicability	6.9.0
CT-36	CT-36	CP-070297	0129	1	A	Essential correction of test case applicability for 27.22.6.1	6.9.0
CT-36	CT-36	CP-070297	0130	1	A	Essential correction on 27.22.8	6.9.0
CT-36	CT-36	CP-070297	0131	–	F	Essential correction on 27.22.5.1	6.9.0
CT-36	CT-36	CP-070297	0132	–	F	Essential correction on 27.22.4.11.1 sequence. 1.4 B	6.9.0
CT-36	CT-36	CP-070297	0133	–	A	Correction of reference to ISO/IEC 7816-3	6.9.0
2007-06	2007-06	–	–	–	–	Update to Rel-7 version (MCC)	7.0.0
CT-37	CT-37	CP-070610	0136	1	F	Essential Correction to 27.22.6.2	7.1.0
CT-37	CT-37	CP-070619	0137	–	F	Essential correction of variable timeout test case applicability	7.1.0
CT-37	CT-37	CP-070610	0138	–	F	Essential correction to 27.22.4.13.1, seq. 1.9	7.1.0
CT-37	CT-37	CP-070619	0139	–	F	Essential Correction to 27.22.6.1, Seq. 1.1	7.1.0
CT-37	CT-37	CP-070619	0140	–	F	Essential correction of references	7.1.0
CT-37	CT-37	CP-070619	0141	1	F	Essential correction of 27.22.4.13.1, sequence 1.7	7.1.0
CT-37	CT-37	CP-070619	0142	1	F	Test Cases dependant on Radio Access Clarification	7.1.0
CT-37	CT-37	CP-070619	0143	–	F	Essential correction of 27.22.4.7.1, sequence 1.6	7.1.0
CT-38	CT-38	CP-070843	0145	1	A	Essential correction of 27.22.8, sequence 1.3 in order to remove verification of the Alpha Identifier	7.2.0
CT-38	CT-38	CP-070843	0154	1	A	Essential correction of 27.22.4.7.1, sequence 1.6 caring of the missing requirements in TS 31.111	7.2.0
CT-38	CT-38	CP-070843	0146	1	A	Essential correction of 27.22.4.26.2.4.2, seq. 2.2 in order to remove the possibility of retrieving a deleted previously visited URL	7.2.0
CT-38	CT-38	CP-070843	0155	–	A	Correction to add optional support of Call Hold Supplementary Service	7.2.0
CT-38	CT-38	CP-070847	0147	–	F	Essential correction terminal profile indication for Local Connection Event	7.2.0
CT-38	CT-38	CP-070847	0149	–	F	Essential correction on test case 27.22.4.5.1	7.2.0
CT-38	CT-38	CP-070847	0150	–	F	Definition of test sequence 1.7 in test case 27.22.4.15	7.2.0
CT-38	CT-38	CP-070847	0151	–	F	Definition of test sequence 1.12 and 1.13 in test case 27.22.4.15	7.2.0
CT-38	CT-38	CP-070847	0152	–	F	Essential correction on test case 27.22.4.28.2.1 correcting wrong implementation of CR 0078 rev1 in C6-060547	7.2.0
CT-38	CT-38	CP-070847	0148	1	F	Introduction of Rel-7 test case applicability	7.2.0
CT-39	CT-39	CP-080172	0156	–	F	Essential correction to 27.22.4.15	7.3.0
CT-39	CT-39	CP-080172	0157	–	F	Essential correction of 27.22.8, seq. 1.3	7.3.0
CT-39	CT-39	CP-080172	0158	1	F	Essential correction regarding terminal capabilities	7.3.0
CT-39	CT-39	CP-080172	0159	–	F	Essential correction to network dependency of several tests	7.3.0
CT-40	CT-40	CP-080388	0160	1	F	Essential correction of icon test case applicability	7.4.0
CT-40	CT-40	CP-080388	0161	2	F	Essential correction to 27.22.6.4	7.4.0
CT-40	CT-40	CP-080388	0163	3	F	Essential correction of test case applicability of 27.22.6.2 and 27.22.4.11	7.4.0
CT-41	CT-41	CP-080588	0164	–	F	Essential correction of TC 27.22.4.12.1 Seq. 1.6	7.5.0
CT-41	CT-41	CP-080588	0165	–	F	Essential correction of test case applicability	7.5.0
CT-41	CT-41	CP-080588	0166	–	F	Essential correction of TC 27.22.7.8.1	7.5.0
CT-42	CT-42	CP-080906	0168	–	F	Essential correction of TC 27.22.6.5 seq. 5.1 applicability	7.6.0
CT-42	CT-42	CP-080906	0169	–	F	Essential correction of bearer parameters in browser tests	7.6.0
CT-42	CT-42	CP-080948	0170	3	A	Pre-conditions for Launch browser	7.6.0
CT-42	CT-42	CP-080948	0171	–	A	Essential correction of 27.22.4.26.2 Seq. 2.2	7.6.0
SP-42	SP-42	—————	–	–	–	Upgrade to Rel-8	8.0.0
CT-43	CT-43	CP-090194	0173	1	F	Inclusion of Rel-8 test case applicability and Rel-8 feature indication in the terminal profile content	8.1.0
CT-43	CT-43	CP-090194	0174	–	F	Essential correction of tables B.1 and E.1	8.1.0
CT-43	CT-43	CP-090194	0176	1	A	Essential correction to BIP tests – usage of ME’s default channel identifier	8.1.0
CT-44	CT-44	CP-090459	0175	3	B	Introduction of steering of roaming test cases	8.2.0
CT-44	CT-44	CP-090460	0177	1	F	Test case and test case applicability changes for terminals with reduced USAT capabilities	8.2.0
CT-45	CT-45	CP-090718	0178	3	F	Essential correction to icon test applicability	8.3.0
CT-45	CT-45	CP-090718	0179	1	F	Update of table E.1 regarding E-UTRAN support indication	8.3.0
CT-45	CT-45	CP-090718	0180	1	F	Essential correction of 27.22.6.1 sequence 1.9	8.3.0
CT-45	CT-45	CP-090718	0181	–	F	Essential correction of 27.22.4.7.3, Seq. 3.2	8.3.0
CT-45	CT-45	CP-090718	0182	–	F	Essential correction of applicability and terminal profile table	8.3.0
–	–	—————	–	–	–	Correction of inconsistency spotted at implementation	8.3.1
CT-46	CT-46	CP-090999	0186	1	F	Essential correction of 27.22.4.7.3	8.4.0
CT-46	CT-46	CP-091000	0187	1	F	Update of TS 31.124 for terminals supporting E-UTRAN	8.4.0
CT-46	CT-46	CP-091000	0188	2	F	Introduction of OPEN CHANNEL tests for E-UTRAN	8.4.0
SA-46	SA-46	—————	–	–	–	Upgrade to Rel-9	9.0.0
CT-47	CT-47	CP-100192	0189	1	B	Introduction of BIP tests for E-UTRAN	9.1.0
CT-47	CT-47	CP-100192	0190	1	B	Introduction of Network Rejection Event test	9.1.0
CT-47	CT-47	CP-100192	0191	1	B	Introduction of Provide Local Information tests for E-UTRAN	9.1.0
CT-47	CT-47	CP-100192	0192	1	B	Introduction of Event Download – Location Status tests for E-UTRAN	9.1.0
CT-47	CT-47	CP-100191	0194	–	F	Introduction of Rel-9 test case applicability	9.1.0
CT-47	CT-47	CP-100179	0195	1	A	Correction of typo error	9.1.0
CT-47	CT-47	CP-100191	0196	2	B	Dual Open Channel tests in TCP mode	9.1.0
CT-47	CT-47	CP-100191	0197	1	B	Open Channel tests for TCP mode and Default Bearer	9.1.0
CT-47	CT-47	CP-100191	0198	1	F	Correction of optional features table	9.1.0
CT-47	CT-47	CP-100179	0199	3	A	Correction of applicability for ‘no alpha identifier presented’ sequences	9.1.0
CT-47	CT-47	CP-100179	0200	–	A	Essential correction to the condition table	9.1.0
CT-48	CT-48	CP-100395	0202	–	F	Essential correction of 27.22.4.31.1 Seq. 1.5	9.2.0
CT-48	CT-48	CP-100395	0205	–	F	Essential correction of Table E.1 regarding Width reduction when in a menu	9.2.0
CT-48	CT-48	CP-100395	0207	–	F	Correction to TAC coding in Provide Local Information test	9.2.0
CT-48	CT-48	CP-100395	0201	1	B	Essential correction of table E.1	9.2.0
CT-48	CT-48	CP-100395	0204	1	F	Essential correction of 27.22.4.27.2 Seq 2.10 test case applicability	9.2.0
CT-48	CT-48	CP-100395	0206	1	F	Correction to applicability table	9.2.0
CT-48	CT-48	CP-100395	0208	1	B	Network Search mode test	9.2.0
CT-48	CT-48	CP-100395	0209	1	B	Event download, Network Search mode test	9.2.0
CT-48	CT-48	CP-100396	0203	1	B	Introduction of Steering of Roaming test for E-UTRAN	9.2.0
CT-49	CT-49	CP-100591	0218	3	A	Essential correction to Open Channel 27.22.4.27.2 sequence 2.4 test	9.3.0
CT-49	CT-49	CP-100592	0212	1	F	Update of references	9.3.0
CT-49	CT-49	CP-100593	0220	1	F	Essential correction to test case applicability of letter class C features	9.3.0
CT-49	CT-49	CP-100593	0214	1	F	Correction of 27.22.4.28.3. Seq 3.2	9.3.0
CT-49	CT-49	CP-100593	0219	1	F	Essential correction to SET UP CALL 27.22.4.13 sequence 1.1	9.3.0
CT-49	CT-49	CP-100613	0215	3	B	Addition of Access Technology change event download tests for E-UTRAN	9.3.0
CT-49	CT-49	CP-100613	0216	3	C	Addition of Open Channel test related to E-UTRAN network	9.3.0
CT-49	CT-49	CP-100613	0222	1	B	Addition of Call Control tests for E-UTRAN	9.3.0
CT-49	CT-49	CP-100620	0221	2	F	Essential correction of test 27.22.4.9.3	9.3.0
CT-50	CT-50	CP-100835	0242	1	B	Addition of Provide local information test , discovery of surrounding CSG cell	9.4.0
CT-50	CT-50	CP-100833	0234	1	F	Clarification of ‘ELSE’ parts in Table E.1	9.4.0
CT-50	CT-50	CP-100834	0235	1	F	Correction of TCP/UDP referencing errors in Table E.1	9.4.0
CT-50	CT-50	CP-100834	0236	1	F	LTE test cases – specifying that default E-UTRAN UICC should be used	9.4.0
CT-50	CT-50	CP-100834	0238	1	F	Correction of SET UP CALL sequence 1.1	9.4.0
CT-50	CT-50	CP-100830	0233	1	B	Definition of E-UTRAN/EPC ISIM-UICC for ISIM related testing	9.4.0
CT-50	CT-50	CP-100834	0239	1	F	Correction of references to non-existent data items in CLOSE CHANNEL(E-UTRAN/EPC)	9.4.0
					–	Correction of errors in implementation of CR 234 (MCC).	9.4.1
CT-51	CT-51	CP-110231	0217	4	B	Addition of Provide Local Information tests for multiple access technologies	9.5.0
CT-51	CT-51	CP-110230	0243	4	B	Introduction ISIM related SMS-PP Data Download tests	9.5.0
CT-51	CT-51	CP-110230	0244	6	B	Introduction ISIM related Send Short Message tests	9.5.0
CT-51	CT-51	CP-110231	0245	2	C	Optimization of SEND SMS test cases	9.5.0
CT-51	CT-51	CP-110231	0246	1	C	Optimization of SMS PP Download test case	9.5.0
CT-51	CT-51	CP-110231	0248		B	Introduction of Polling Off test for E-UTRAN	9.5.0
CT-51	CT-51	CP-110231	0250	1	F	Essential correction on BIP TCs for E-UTRAN/EPC	9.5.0
SP-51	SP-51					Automatic upgrade from previous version 9.5.0	10.0.0
CT-52	CT-52	CP-110503	0241	3	F	Addition of Event download test, CSG cell Selection	10.1.0
CT-52	CT-52	CP-110504	0252		F	Introduction ISIM related SMS-PP Data Download tests	10.1.0
CT-52	CT-52	CP-110504	0253	1	F	Introduction ISIM related Send Short Message tests	10.1.0
CT-53	CT-53	CP-110719	0255	3	F	Essential correction of the Terminal Profile entries in table E.1	10.2.0
CT-53	CT-53	CP-110719	0258	1	F	Essential correction of Send Short message tests	10.2.0
CT-53	CT-53	CP-110592	0259	1	A	Essential correction of Data Destination Address settings in BIP and Launch Browser tests	10.2.0
CT-53	CT-53	CP-110719	0261	1	F	Essential Correction to Tag length in Provide Local Information test	10.2.0
CT-53	CT-53	CP-110719	0262	1	F	Essential Correction to Network Rejection Event test	10.2.0
						Correction of implementation error in CR 255r3 (MCC)	10.2.1
CT-54	CT-54	CP-110904	0263		F	Essential correction of SMS-PP Data Download test cases	10.3.0
CT-54	CT-54	CP-110904	0265	1	F	Essential correction to Channel Status After Link Dropped in E-UTRA	10.3.0
CT-54	CT-54	CP-110904	0266	1	F	Correction to test sequence content 4.3 and 4.4 for test case 27.22.4.1 of Table B.1	10.3.0
CT-54	CT-54	CP-110904	0256	2	F	Essential correction to Steering of Roaming test case	10.3.0
CT-54	CT-54	CP-110906	0264	1	A	Essential correction to SMS-CB Applicability	10.3.0
CT-54	CT-54	CP-110906	0257	2	A	Essential correction to Play Tone test	10.3.0
CT-54	CT-54	CP-110907	0267		F	Correction of incorrect implementation of CR 255r3	10.3.0
CT-55	CT-55	CP-120151	0269	1	A	Test applicability correction of Open Channel with user rejection tests	10.4.0
CT-55	CT-55	CP-120152	0271	2	F	Essential correction to test 27.22.4.15 Seq. 1.15	10.4.0
CT-55	CT-55	CP-120153	0268	3	B	Introduction of REFRESH with AID test	10.4.0
CT-56	CT-56	CP-120394	0270	2	A	Test applicability correction for terminals operating in PS mode	10.5.0
CT-56	CT-56	CP-120394	0275	1	A	Correction of expected Terminal Reponse for unsuccessful Open Channel commands	10.5.0
CT-56	CT-56	CP-120395	0277		F	Essential corrections to the Network Rejection Event test cases	10.5.0
CT-56	CT-56	CP-120395	0279		B	Introduction of test cases for Send Short Message and SMS PP data download over SGs (E-UTRAN)	10.5.0
CT-56	CT-56	CP-120395	0276	1	F	Essential correction of Open Channel with Bearer type 0B tests	10.5.0
CT-56	CT-56	CP-120395	0278	1	C	Test modification for Provide Local Information IMEI and IMEISV testing	10.5.0
CT-57	CT-57	CP-120629	0282	2	A	Essential correction of Launch Browser tests	10.6.0
CT-57	CT-57	CP-120629	0286	2	A	Essential correction of Launch Browser tests	10.6.0
CT-57	CT-57	CP-120630	0283		F	Correction of Terminal Profile entries in table E.1	10.6.0
CT-57	CT-57	CP-120630	0281	1	F	Correction of test sequence for PROVIDE LOCAL INFORMATION, Discovery of surrounding CSG cells	10.6.0
CT-57	CT-57	CP-120631	0280	1	F	Corrections to test sequence 27.22.7.18.1 for CSG Cell Selection	10.6.0
CT-57	CT-57	CP-120632	0284		F	Correction of network simulator dependencies of the tests in 27.22.7.4	10.6.0
CT-57	CT-57	CP-120633	0272	5	B	Addition of UICC Access to IMS tests	10.6.0
SP-57	SP-57					Automatic upgrade to Rel-11	11.0.0
CT-58	CT-58	CP-120875	0287	1	F	TERMINAL RESPONSE in steering of roaming test steps	11.1.0
CT-59	CT-59	CP-130149	0290	1	A	Applicability of tests for MEs with reduced capabilities	11.2.0
CT-60	CT-60	CP-130370	0285	6	B	Superseding of OPEN CHANNEL test sequence 2.1 by Default Bearer test sequence	11.3.0
CT-60	CT-60	CP-130370	0291	1	F	Removal of applicability condition C102	11.3.0
CT-60	CT-60	CP-130370	0292		F	Correction to the applicability of test case 27.22.4.7 seq. 4.1	11.3.0
CT-60	CT-60	CP-130370	0293		F	Correction to the applicability of test case 27.22.8 seq. 1.4	11.3.0
CT-60	CT-60	CP-130371	0296	2	F	Correction of test sequence for PROVIDE LOCAL INFORMATION, E-UTRAN Intra-Frequency and Inter-Frequency Measurements	11.3.0
CT-60	CT-60	CP-130370	0297	1	F	Change of test sequence for SMS-PP data download	11.3.0
CT-60	CT-60	CP-130373	0298	2	A	Changes in LAUNCH BROWSER test cases	11.3.0
CT-60	CT-60	CP-130370	0299	2	F	Correction of test sequence for PROVIDE LOCAL INFORMATION, NMR, UTRAN	11.3.0
CT-60	CT-60	CP-130370	0300	2	F	Essential correction to the applicability and test procedure of test case 27.22.4.10 Seq 1.9 & 27.22.5.1 Seq 1.9	11.3.0
CT-61	CT-61	CP-130532	0301	1	F	Correction of Terminal Profile evaluation	11.4.0
CT-61	CT-61	CP-130532	0304	1	F	Correction of chapter numbering in 27.22.7.15	11.4.0
CT-61	CT-61	CP-130532	0305	1	F	Correction to applicability information of test case 27.22.4.15 seq 1.10	11.4.0
CT-62	CT-62	CP-130791	0302	1	F	Correction of Terminal Profile evaluation for SET UP CALL bit	11.5.0
CT-62	CT-62	CP-130791	0307		F	Correction to test case 27.22.5.2 seq. 1.7	11.5.0
CT-62	CT-62	CP-130791	0308		F	Update the status of A.1/154	11.5.0
CT-62	CT-62	CP-130791	0309		F	Update of the Generic Test Procedure 1 (SMS-PP Data Download)	11.5.0
CT-63	CT-63	CP-140173	0310	1	F	Usage of URL in test cases for LAUNCH BROWSER command	11.6.0
CT-64	CT-64	CP-140428	0313	1	F	Clarification on test case for PROVIDE LOCAL INFORMATION, E-UTRAN Inter-Frequency Measurements	11.7.0
CT-64	CT-64	CP-140426	0311	2	B	Changes for validation of TI value	12.0.0
CT-64	CT-64	CP-140433	0314	1	F	Modification to test case 27.22.4.28.3 SEQ 3.2 (step 5)	12.0.0
CT-65	CT-65	CP-140705	0317	1	F	Open channel terminal response in case of modified parameters	12.1.0
CT-65	CT-65	CP-140705	0321	3	F	Change of test sequence for LAUNCH BROWSER with default URL	12.1.0
CT-65	CT-65	CP-140709	0316		F	Removal of applicability condition C133, C135, C136, C137 and C138	12.1.0
CT-65	CT-65	CP-140710	0315		F	Correction of Network Dependency of the TBD test sequence	12.1.0
CT-66	CT-66	CP-140965	0324	1	F	Change of test sequence for LAUNCH BROWSER with default URL	12.2.0
CT-66	CT-66	CP-140966	0323	3	F	Correction of usage of TP-Message-Reference (TP-MR) in Send Short Message 1.9	12.2.0
CT-67	CT-67	CP-150164	0411		B	Added column for Rel.12 in applicability table	12.3.0
CT-67	CT-67	CP-150164	0412	1	F	Update of reference to ETSI TS 102 221 and release scope	12.3.0
CT-67	CT-67	CP-150164	0416		F	Correction of OPEN CHANNEL Alpha Identifier handling and introduction of new alternative Terminal Response for GET CHANNEL STATUS Sequences 1.4 and 1.5 and CLOSE CHANNEL Sequence 3.2.	12.3.0
CT-67	CT-67	CP-150164	0417		F	Correction of usage of TP-Message-Reference (TP-MR) in remaining Send Short Message test cases	12.3.0
CT-68	CT-68	CP-150387	0419	3	C	Removal of mandatory clause	13.0.0
CT-68	CT-68	CP-150386	0420	3	C	Making features optional	13.0.0
CT-69	CT-69	CP-150562	0423		F	Typo in the Option A.1/74 for Class E: Terminal supports UDP, Terminal in Server Mode	13.1.0
CT-69	CT-69	CP-150562	0422	1	B	Addition of Rel.13 column to applicability table	13.1.0
CT-69	CT-69	CP-150562	0427	1	F	Correction of technical handling of features made optional by TR 31.901 within applicability table and terminal profile.	13.1.0
CT-69	CT-69	CP-150562	0428	1	F	Correction to PLI, Inter-frequency UTRAN Measurements test case	13.1.0
CT-69	CT-69	CP-150562	0424	3	B	USAT Testing Enhancement by addition of REFRESH with IMSI changing procedure test sequences	13.1.0
CT-69	CT-69	CP-150562	0425	3	B	USAT Testing Enhancement by addition of REFRESH with IMSI changing procedure test sequences for E-UTRAN	13.1.0
CT-70	CT-70	CP-150828	0430	1	F	Correction of applicability table for Short Message Service (SMS) over SGs	13.2.0
CT-71	CT-71	CP-160144	0434		F	Correction of test case for Location status and access technology change events	13.3.0
CT-71	CT-71	CP-160144	0431	1	F	Correction of TERMINAL RESPONSE coding in 27.22.4.7.2 sequence 2.3	13.3.0
CT-71	CT-71	CP-160144	0432	1	D	Editorial corrections of 27.22.4.11.1 – Expected Sequence 1.5	13.3.0
CT-71	CT-71	CP-160144	0433	2	F	Inclusion of Rel-12 and Rel-13 feature indication in the terminal profile support in Annex B	13.3.0
CT-72	CT-72	C6-160214	0435		F	Addition of execution parameter to the applicability of TC 27.22.4.28.3 sequence 3.2	13.4.0
CT-72	CT-72	C6-160333	0441		F	Clarification of ME behavior after 3G session reset for E-UTRAN	13.4.0
CT-72	CT-72	C6-160237	0440		F	Correction to Test Case 27.22.4.15	13.4.0
CT-72	CT-72	C6-160262	0437	2	F	Addition of note to TC 27.22.4.7.2 Seq. 2.6/7 and TC 27.22.4.7.5 Seq. 5.1/2	13.4.0
CT-72	CT-72	C6-160266	0439	1	F	Correction of test case for Location status and access technology change events	13.4.0
CT-72	CT-72	C6-160278	0438	2	F	Essential correction of test case 27.22.4.14 for E-UTRAN	13.4.0
CT-72	CT-72	C6-160280	0436	1	F	Clarification of ME behavior after 3G session reset	13.4.0
CT-73	CT-73	C6-160402	0442	1	F	Essential correction of test case 27.22.4.14 Sequence 1.1	13.5.0
CT-73	CT-73	C6-160386	0443	1	F	Essential corrections on test case 27.22.4.7.3	13.5.0
CT-73	CT-73	C6-160373	0444	1	F	Clarification of ME behaviour after 3G session reset	13.5.0
CT-73	CT-73	C6-160393	0445		F	Essential correction to number of BIP channels	13.5.0
CT-73	CT-73	C6-160402	0446	1	F	Definition of expected EVENT DOWNLOAD – Location Status content in test case 27.22.7.4	13.5.0
CT-74	CT-74	C6-160515	0447		F	Bit in Terminal Profile for call control functionality	13.6.0
CT-74	CT-74	C6-160562	0449		F	Essential correction to test case on PROVIDE LOCAL INFORMATION	13.6.0
CT-74	CT-74	C6-160595	0448	1	F	Correction in initial conditions for test case for Open Channel (related to E-UTRAN)	13.6.0
CT-75	CT-75	C6-170090	0451	1	B	Modification of test cases 27.22.4.10.8 and 27.22.5.4 to test NB-IoT	13.7.0
CT-75	CT-75	C6-170097	0450	3	B	Updating some E-UTRAN test cases applicability to cover NB-IoT implementations	13.7.0
CT-75	CT-75	C6-170044	0452	–	B	Modification of E-UTRAN test sequences under cl. 27.22.4.15 and 27.22.4.14 to cover NB-IoT	13.7.0
0453	0453	C6-17045	0453	–	B	Modification of E-UTRAN test sequences under cl. 27.22.4.7.3 and 27.22.4.7.5 to test NB-IoT	13.7.0
SA-75	SA-75		–	–	13.7.0	Update to Rel-14 version (MCC)	14.0.0
					14.0.0	Correction of implementation error	14.0.1
CT-76	CT-76	C6-170246	0460	–	B	Modification of E-UTRAN BIP test sequences to verify NB-IoT	14.1.0
CT-76	CT-76	C6-170270	0459	1	B	Modification of E-UTRAN test sequences under cl. 27.22.7.4 and 27.22.7.17 to test NB-IoT	14.1.0
CT-76	CT-76	C6-170290	0461	2	B	Introduction of new test case for Call Control on EPS PDN connection	14.1.0
CT-77	CT-77	C6-170421	0466	–	F	Essential correction to test sequences related to Steering of roaming	14.2.0
CT-77	CT-77	C6-170422	0467	–	F	Conditions for URI support in SEND SHORT MESSAGE command	14.2.0
CT-77	CT-77	C6-170423	0468	–	F	Correction of AT Response in test cases for RUN AT COMMAND	14.2.0
CT-77	CT-77	C6-170520	0469	–	F	Essential correction to the applicability of URI support in SET UP CALL	14.2.0
CT-77	CT-77	C6-170480	0470	1	F	Clarification on the requested address during execution of test cases for OPEN CHANNEL	14.2.0
CT-77	CT-77	C6-170488	0471	3	F	Correction of wrong implementation of CRs in TS 31.124	14.2.0
CT-77	CT-77	C6-170504	0473	2	B	Introduction of new test sequences for EVENT DOWNLOAD in E-UTRAN	14.2.0
CT-77	CT-77	C6-170505	0474	3	F	Corrections of test case 27.22.10	14.2.0
CT-77	CT-77	C6-170506	0475	3	B	Adding content to FFS test sequences under 27.22.10	14.2.0
CT-78	CT-78	C6-170743	0476	5	B	Introduction of new test case for Call Control on PDP Context Activation	14.3.0
CT-78	CT-78	C6-170698	0477	1	F	Correction of AT Command in test cases for RUN AT COMMAND	14.3.0
CT-78	CT-78	C6-170634	0478	–	B	Usage of programmed USIM for execution of test cases	14.3.0
CT-78	CT-78	C6-170693	0479	1	F	Fixed applicability table for Call Control on EPS PDN connection	14.3.0
CT-78	CT-78	C6-170637	0480	–	F	Correction of call flow for CALL CONTROL on EPS PDN Connection	14.3.0
CT-78	CT-78	C6-170647	0481	–	F	Correction of wrong implemention of CR 0471	14.3.0
CT-78	CT-78	C6-170747	0482	3	D	Introduction of note about applicability of some test cases	14.3.0
CT-78	CT-78	C6-170724	0483	1	D	Clause number correction of TC 27.22.10	14.3.0
CT-78	CT-78	C6-170725	0484	1	F	Introduction of general definition and environment for E-UTRAN in NB-S1 mode	14.3.0
CT-78	CT-78	C6-170721	0485	1	F	Clarification on the requested address during execution of TC 27.22.4.31 and 27.22.7.10	14.3.0
CT-79	CT-79	C6-180079	0487	4	B	Introduction of new test cases on UICC interface in PSM & eDRX	14.4.0
CT-79	CT-79	C6-180061	0488	1	F	Correction of wrong implemenation of CR 0471	14.4.0
CT-80	CT-80	C6-180160	0489	2	B	Introduction of new test cases on change eCall mode	14.5.0
CT-80	CT-80	C6-180118	0490	–	B	Inclusion of Rel‑14 feature indication in the terminal profile support in Annex B	14.5.0
CT-80	CT-80	C6-180164	0491	1	F	Correct incorrectly implemented conditions for testcases.	14.5.0
CT-80	CT-80					Update to release 15
2018-09	CT#81	C6-180554	0497	1	F	Correction to expression of C291 in Table E.1	15.1.0
2018-09	CT#81	C6-180555	0498	1	F	Correction to TC 27.22.4.28 Seq. 3.2	15.1.0
2018-09	CT#81	C6-180556	0499	1	F	Correction to test case 27.22.5.4 Seq 4.1	15.1.0
2018-09	CT#81	C6-180557	0500	1	F	Correction to applicability of TC 27.22.8.1 Seq 1.10 to Seq. 1.17	15.1.0
2018-09	CT#81	C6-180558	0501	1	F	Correction to applicability of TC 27.22.4.15 Seq. 1.17	15.1.0
2018-09	CT#81	C6-180562	0502	1	F	TS 31.124: Adding applicability for Rel.15 terminals	15.1.0
2018-09	CT#81	C6-180331	0493	2	B	Addition of new test case to cl. 27.22.7.12	15.2.0
2018-09	CT#81	C6-180330	0494	–	F	Addition of Terminal Response verification to Test Sequences 1.3, 1.4 and 1.5 under 27.22.7.10	15.2.0
2018-09	CT#81	C6-180380	0495	1	B	Addition of new test cases for 3GPP PS Data Off	15.2.0
2018-09	CT#81	C6-180565	0496	3	B	Introduction of new test cases for Data Connection Status Change event	15.2.0
2018-09	CT#81	C6-180218	0492	–	D	Remove ambiquity in Location Status Event and Access Technology Change Event testcases.	15.2.0
2018-12	CT#82	C6-180678	0504	1	F	Correction to Network Rejection event code for E-UTRAN	15.3.0
2018-12	CT#82	C6-180634	0505	–	F	Correction of wrong implementation of CR 0488	15.3.0
2019-03	CT#83	C6-190027	0506	–	F	Correction of applicability of test case 27.22.7.4 Seq. 1.1	15.4.0
2019-03	CT#83	C6-190062	0507	2	F	Close channel with Command qualifier Set to 1	15.4.0
2019-03	CT#83	C6-190078	0508	3	F	Verify the maximum number of Open Channel requests handled by UE	15.4.0
2019-06	CT#84	C6-191017	0511	1	B	Extend the scope of 31.124 to cover 5G aspects	15.5.0
2019-12	CT#86	C6-190355	0513	1	F	Correction of wrong reference in TC 27.22.7.10.1 Seq 1.4	15.6.0
2019-12	CT#86	C6-190356	0514	1	F	Update test spec to correctly reflect global phonebook support for certain devices	15.6.0
2019-12	CT#86	C6-190444	0516	2	F	Update on Exceptions for NB-IoT	15.6.0
2019-12	CT#86	C6-190448	0518	2	F	Correction of conditional expected values in the TERMINAL PROFILE	15.6.0
2019-12	CT#86	CP-193263	0520	–	F	Correction of terminal profile support in Annex B	15.6.0
2020-03	CT#87e	CP-200085	0522	2	B	27.22.7.4 Seq 1.3_EVENT DOWNLOAD-LOCATION STATUS, NG-RAN	15.7.0
2020-03	CT#87e	CP-200085	0523	3	B	27.22.4.15 Seq 1.22_PLI_LOCATION_INFORMATION_NG-RAN	15.7.0
2020-03	CT#87e	CP-200085	0524	–	B	27.22.7.12 Seq 1.4_EVENT DOWNLOAD-Access Tech Event, NG-RAN	15.7.0
2020-03	CT#87e	CP-200085	0525	–	B	27.22.4.15 Seq 1.23_PLI_Acces_Technology_NG-RAN	15.7.0
2020-03	CT#87e	CP-200085	0526	–	B	27.22.7.17 Seq 1.3&1.4_EVENT DOWNLOAD-Registration_Reject Event, NG-RAN	15.7.0
2020-03	CT#87e	CP-200085	0527	–	B	T27.22.4.27.8_Open_Channel_related to NG-RAN	15.7.0
2020-06	CT#88e	CP-201142	0528	1	F	Correction of EF_AD in the default ISIM values	15.8.0
2020-06	CT#88e	CP-201142	0543	1	F	Correction of 27.22.7.12	15.8.0
2020-06	CT#88e	CP-201140	0529	1	F	Update the scope of 31.124 to cover 5G aspects	15.8.0
2020-06	CT#88e	CP-201140	0530	–	F	Cleanup of the feature options and applicability tables	15.8.0
2020-06	CT#88e	CP-201140	0531	–	F	Correction to TC 27.22.4.15	15.8.0
2020-06	CT#88e	CP-201140	0532	–	F	Correction to TC 27.22.4.27.8	15.8.0
2020-06	CT#88e	CP-201140	0533	1	F	Correction to TC 27.22.7.4	15.8.0
2020-06	CT#88e	CP-201140	0535	–	F	Correction to TC 27.22.7.17	15.8.0
2020-06	CT#88e	CP-201140	0536	–	F	Correction to TC 27.22.7.12	15.8.0
2020-06	CT#88e	CP-201140	0544	–	F	Correction to TC 27.22.4.7.5	15.8.0
2020-06	CT#88e	CP-201140	0545	–	F	Correction to TC 27.22.4.7.3	15.8.0
2020-06	CT#88e	CP-201152	0537	1	F	T27.22.4.27.8 Open_Channel_related to NG-RAN Correction to Applicability Table	15.8.0
2020-06	CT#88e	CP-201152	0538	2	B	Testcase 27.22.13 CALL CONTROL EVENT on PDU Session Establishment for NG-RAN (allowed and not allowed sequences)	15.8.0
2020-06	CT#88e	CP-201152	0539	3	B	Testcase 27.22.13 CALL CONTROL EVENT on PDU Session Establishment for NG-RAN (allowed with modification sequences)	15.8.0
2020-06	CT#88e	CP-201152	0540	1	B	TestCase 27.22.13 CALL CONTROL EVENT on PDU Session Establishment by OPEN CHANNEL for NG-RAN and which is allowed by the USIM.	15.8.0
2020-06	CT#88e	CP-201324	0541	4	B	Test Case Steering Of Roaming via DL NAS TRANSPORT message passed to USIM	15.8.0
2020-06	CT#88e	CP-201325	0542	3	B	Test Case Routing Indicator Data update via NAS message passed to USIM	15.8.0
2020-07	CT#88e	–	–	–	–	Update to Rel-16 version (MCC)	16.0.0
2020-09	CT#89e	CP-202135	0564	–	A	Test Case 27.22.4.27.8 / 27.22.13 – Correction on the coding of PDU session Type from Bearer description for NG-RAN in OPEN CHANNEL / TERMINAL RESPONSE	16.1.0
2020-09	CT#89e	CP-202135	0549	1	A	Correction to TC 27.22.14	16.1.0
2020-09	CT#89e	CP-202135	0550	1	A	Correction to applicability of TC 27.22.4.27.8	16.1.0
2020-09	CT#89e	CP-202135	0548	1	A	Correction to TC 27.22.13	16.1.0
2020-09	CT#89e	CP-202135	0563	2	A	Correction to 31.124, clause 27.22.2D.1 Definition of NG-RAN UICC	16.1.0
2020-09	CT#89e	CP-202135	0547	1	A	Update of test requirement of some cases	16.1.0
2020-12	CT#90e	CP-203090	0569	–	A	Correction of TC 27.22.13.1	16.2.0
2020-12	CT#90e	CP-203090	0571	–	A	Correction of TC 27.22.7.12 Seq 1.4	16.2.0
2020-12	CT#90e	CP-203090	0590	–	A	Re-introduction of C6-200666	16.2.0
2020-12	CT#90e	CP-203090	0582	3	A	Update of test case 27.22.4.29-RECEIVE DATA	16.2.0
2020-12	CT#90e	CP-203090	0584	3	A	Update of test case 27.22.4.31,GET STATUS-after a link dropped during receiving data	16.2.0
2020-12	CT#90e	CP-203095	0573	1	A	Correction of EF_EPSNSC in clause 27.22.2B.1	16.2.0
2020-12	CT#90e	CP-203095	0576	–	A	Correction of Test case – TC 27_22_7_21	16.2.0
2020-12	CT#90e	CP-203095	0578	–	A	Correction of length bytes in TC 27.22.14.x	16.2.0
2021-03	CT#91e	CP-210080	0591	1	F	Correction of test case 27.22.4.29.1- RECEIVE DATA, the length of receive data exceeding the buffer size	16.3.0
2021-03	CT#91e	CP-210080	0592	1	B	Add a Expected sequence of TC 27.22.4.29.1- RECEIVE DATA, receiving 65535 Bytes of data	16.3.0
2021-03	CT#91e	CP-210080	0593	1	B	Add a Expected sequence of TC 27.22.4.29.1- RECEIVE DATA, send refresh after receiving data	16.3.0
2021-03	CT#91e	CP-210080	0594	1	B	Add TC- SEND DATA(NG-RAN)	16.3.0
2021-03	CT#91e	CP-210080	0595	1	F	Changes for event registration step required for the test cases verifying EVENT DOWNLOAD envelops to support programmable SIM defined in 27.0.	16.3.0
2021-03	CT#91e	CP-210082	0580	1	B	Test Case Steering Of Roaming via DL NAS TRANSPORT long message passed to USIM in several commands (Rel16)	16.3.0
2021-06	CT#92e	CP-211096	0598	1	F	Corrections to 5G USAT test cases	16.4.0
2021-06	CT#92e	CP-211096	0601	2	B	Test Case Steering Of Roaming via REGISTRATION ACCEPT message passed to USIM in ENVELOPE SMS-PP Data Download command(s)	16.4.0
2021-06	CT#92e	CP-211096	0602	2	B	Add a Expected sequence of TC 27.22.4.29.1- RECEIVE DATA, UICC in Server mode	16.4.0
2021-06	CT#92e	CP-211096	0603	–	B	Add a Expected sequence of TC 27.22.4.29.1- RECEIVE DATA, 2 consecutive RECEIVE DATA	16.4.0
2021-06	CT#92e	CP-211097	0599	–	F	Correction of the table of optional feature	16.4.0
2021-06	CT#92e	CP-211097	0600	1	F	Correction the Mnemonic of AER002	16.4.0
2021-09	CT#93e	CP-212087	0605	1	D	Update of TC 27.22.4.29.1	16.5.0
2021-09	CT#93e	CP-212087	0604	1	F	Correction of TC 27.22.4.29.1 Seq 1.4	16.5.0
2021-12	CT#94e	CP-213162	0607	1	F	Correction of TC 27.22.4.27.8 Seq 8.4	16.6.0
2021-12	CT#94e	CP-213162	0607	1	F	Correction of TC 27.22.4.29.1 Seq 1.3 and 1.4	16.6.0
2021-12	CT#94e	CP-213162	0609	1	F	Correction of TC 27.22.13.1	16.6.0
2021-12	CT#94e	CP-213162	0610	1	F	Correction of TC 27.22.14.1	16.6.0
2021-12	CT#94e	CP-213162	0611	–	F	Correction of TC 27.22.14.2	16.6.0
2021-12	CT#94e	CP-213162	0612	–	F	Correction of TC 27.22.14.3	16.6.0
2021-12	CT#94e	CP-213162	0614	1	F	Correction to TC 27.22.4.27.8 OPEN CHANNEL Seq 8.3	16.6.0
2021-12	CT#94e	CP-213162	0615	1	F	Correction to TC 27.22.13.1 CALL CONTROL Seq 1.6	16.6.0
2021-12	CT#94e	CP-213162	0615	1	F	Remove a Expected sequence of TC 27.22.4.29.1- RECEIVE DATA, UICC in Server Mode	16.6.0
2021-12	CT#94e	CP-213166	0616	–	F	Correction of terminal response in TC 27.22.7.10 Seq 1.3, 1.4 and 1.5	16.6.0
2021-12	CT#94e	CP-213166	0617	1	F	Correction of Table E.1 Terminal Profile	16.6.0
2022-02	–	–	–	–	–	MCC Editorial update to overcome processing problems and reformat some large tables	16.6.1
2022-03	CT#95e	CP-220129	0625	–	F	Correction of the Applicability table	16.7.0
2022-03	CT#95e	CP-220129	0627	1	F	Correction on TC 27.22.4.7.5 Seqence 5.1	16.7.0
2022-03	CT#95e	CP-220128	0606	4	B	Addition of TC 27.22.14.2 sequence 2.X	16.7.0
2022-03	CT#95e	CP-220128	0621	1	F	Update of Always-on PDU session cases	16.7.0
2022-03	CT#95e	CP-220128	0622	–	F	Update of the USAT applicability table	16.7.0
2022-03	CT#95e	CP-220128	0623	3	B	Add a TC for 27.22.4.7- REFRESH (IMSI changing procedure, NG-RAN)	16.7.0
2022-03	CT#95e	CP-220128	0624	2	B	Add a Expected sequence of TC 27.22.4.26-LAUNCH BROSWER,only NG-RAN bearer specified and gateway proxy identity	16.7.0
2022-03	CT#95e	CP-220128	0626	1	B	Add a TC for 27.22.4.7- REFRESH (SUPI_NAI changing procedure, NG-RAN)	16.7.0
2022-03	CT#95e	CP-220128	0628	1	F	Changes for command numbering in RECEIVE DATA test cases	16.7.0
2022-06	CT#96	CP-221162	0636	1	F	Correction of the Applicability Table B.1 and Annex Table E.1	16.8.0
2022-06	CT#96	CP-221163	0631	3	C	Correction of TC 27.22.14.2	16.8.0
2022-06	CT#96	CP-221163	0632	–	F	Correction of TC 27.22.4.29.1 Seq 1.4	16.8.0
2022-06	CT#96	CP-221163	0633	–	D	Alignment of EF_UST descriptions in 27.22.2x clauses	16.8.0
2022-06	CT#96	CP-221163	0630	–	F	SSC mode corrections for BIP test cases (related to NG-RAN)	16.8.0
2022-09	CT#97e	CP-222078	0638	1	F	Update of TC 27.22.4.31 Seq 1.6	16.9.0
2022-09	CT#97e	CP-222078	0639	1	F	Update of TC 27.22.14.2 Seq 2.3	16.9.0
2022-09	CT#97e	CP-222078	0640	1	F	Update of applicability for TC 27.22.4.26 Seq. 8.1 and TC 27.22.4.7 Seq. 6.1 and 6.2	16.9.0
2022-09	CT#97e	CP-222078	0641	1	F	Update length of 5G-GUTI in EF5GS3GPPLOCI	16.9.0
2022-09	CT#97e	CP-222078	0643	–	F	Correction of Table E.1: TERMINAL PROFILE	16.9.0
2022-09	CT#97e	CP-222078	0644	1	F	Correction of TC 27.22.14.2	16.9.0
2022-09	CT#97e	CP-222078	0648	–	F	Update of TC 27.22.4.26 Seq 8.1	16.9.0
2022-09	CT#97e	CP-222078	0654	2	F	Correction of the tests in cl. 27.22.13	16.9.0
2022-09	CT#97e	CP-222080	0646	2	F	Correction to TC 27.22.14.2	16.9.0
2022-09	CT#97e	CP-222080	0647	2	F	Correction to TC 27.22.14.3	16.9.0
2022-12	CT#98e	CP-223077	0656	1	F	Correction to TC 27.22.14.2 and 27.22.14.3	16.10.0
2022-12	CT#98e	CP-223077	0657	1	F	Correction to TC 27.22.14.1 Seqs 1.2 and 1.3	16.10.0
2022-12	CT#98e	CP-223077	0658	2	F	Correction to the service 127 in initial conditions of the TC 27.22.14.2	16.10.0
2022-12	CT#98e	CP-223080	0655	1	F	Correction of NAI test case 27.22.4.7.7	16.10.0
2022-12	CT#98e	CP-223080	0660	1	F	Correction of test case 27.22.14.2 Seq 2.3	16.10.0
2022-12	CT#98e	CP-223080	0661	1	F	Coding correction of EFRouting_Indicator in 31.124	16.10.0
2022-12	CT#98e	CP-223080	0662	–	D	Editorial Correction in Applicability Table B.1	16.10.0
2022-12	CT#98e	CP-223151	0663	2	F	Update Table E.1 TERMINAL PROFILE support	16.10.0
2022-12	CT#98e	CP-223080	0664	–	F	Correction of test case 27.22.4.7.6	16.10.0
2022-12	CT#98e	CP-223080	0665	2	B	Add a Expected sequence-Trigger LAUNCH BROWSER by CALL CONTROL	16.10.0
2022-12	CT#98e	CP-223080	0666	1	B	Add a Expected sequence-Trigger LAUNCH BROWSER by MT Call event	16.10.0
2022-12	CT#98e	CP-223080	0667	3	B	Add a Expected sequence-Trigger LAUNCH BROWSER during mobile originated call	16.10.0
2022-12	CT#98e	CP-223080	0668	3	B	Add a Expected sequence-Trigger LAUNCH BROWSER during mobile terminated call	16.10.0
2022-12	CT#98e	CP-223080	0669	1	F	Correction in test 27.22.14.2 Seq. 2.3	16.10.0
2022-12	CT#98e	CP-223260	0659	3	B	Test case on PROVIDE LOCAL INFORMATION to get Slice(s) information	16.10.0
2023-01						Hyperlinks removed and some editorial corrections	16.10.1