27.22.12 Change eCall mode
31.1243GPPMobile Equipment (ME) conformance test specificationRelease 16TSUniversal Subscriber Identity Module Application Toolkit (USAT) conformance test specification
27.22.12.1 Definition and applicability
See clause 3.2.2.
27.22.12.2 Conformance requirement
The UE shall support eCall feature on the USIM and is able to change the eCall mode as specified in:
– TS 31.102 [14] clause 5.3.40.
27.22.12.3 Test purpose
To verify that the ME is able to change the eCall mode after the re-configuration of the USIM from eCall only support to eCall and Normal call support, or vice versa, by changing the content of the USIM Service Table, and/or by changing the content of the EFEST, where the ME shall be notified of the changes by using the REFRESH proactive command.
27.22.12.4 Method of test
27.22.12.4.1 Initial conditions
The ME is connected to the USIM Simulator and connected to the E-USS or USS.
For test sequences 1.1 – 1.3 the E-UTRAN parameters of the E-USS are:
– Mobile Country Code (MCC) = 246;
– Mobile Network Code (MNC) = 81;
– Tracking Area Code (TAC) = 0001.
For test sequences 1.4 and 1.5 the GERAN or UTRAN parameters of the USS are:
Mobile Country Code (MCC) = 246;
– Mobile Network Code (MNC) = 81;
– Location Area Code (LAC) = 0001.
The elementary files are coded as the default E-UTRAN/EPC UICC, with the following exceptions:
For test sequences 1.1, 1.4:
– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN) and (Service n°89) eCall Data are available
– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) is enabled
– EFFDN contains only two entries: eCall test number (123) and eCall reconfiguration number (345)
– EFSDN the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)
For test sequences 1.2, and 1.5:
– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN) and (Service n°89) eCall Data are available
– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) disabled
– EFFDN contains only two entries: eCall test number (123) and eCall reconfiguration number (345)
– EFSDN the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)
For test sequence 1.3:
– EFUST the services (Service n°2) Fixed Dialling Numbers (FDN), (Service n°4) Service Dialling Numbers (SDN), (Service n°99) URI support by UICC and (Service n°112) eCall Data over IMS are available.
– EFEST has the Service n°2 Fixed Dialling Numbers (FDN) enabled
– EFFDNURI contains only two entries: eCall test number (123) and eCall reconfiguration number (345)
– EFSDNURI the last two entries contains two entries: eCall test number (456) and eCall reconfiguration number (678)
PIN of the USIM is disabled.
Prior to this test the ME shall have been powered on, performed the PROFILE DOWNLOAD procedure and registered to the network.
27.22.12.4.2 Procedure
Expected Sequence 1.1 (REFRESH after change eCall mode, disable FDN in EFEST, E-UTRAN)
|
Step |
Direction |
MESSAGE / Action |
Comments |
|
1 |
User 🡪 ME ME 🡪 E-USS |
Set up an eCall |
[Call is established using the number in EFFDN] |
|
2 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
3 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
4 |
ME 🡪 User |
Call set up not allowed |
|
|
5 |
E-USS 🡪 ME |
SMS-PP Data Download |
|
|
6 |
ME 🡪 UICC |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1 |
|
|
7 |
UICC → ME |
SMS-PP Data Download UICC Acknowledgement |
[SW ’90 00′] |
|
8 |
ME 🡪 E-USS |
SMS-PP Data Download UICC acknowledgement (RP-ACK) message. |
|
|
9 |
UICC |
EFEST contents state FDN is disabled |
[New EFEST value: 00] |
|
10 |
UICC 🡪 ME |
PROACTIVE COMMAND PENDING: REFRESH 1.1.1 |
|
|
11 |
ME 🡪 UICC |
FETCH |
|
|
12 |
UICC 🡪 ME |
PROACTIVE COMMAND: REFRESH 1.1.1 |
|
|
13 |
ME → UICC |
TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B |
[additional EFs read] |
|
14 |
User 🡪 ME ME→ E-USS |
Set up an eCall |
[Call is established using the number located in EFSDN] |
|
15 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
16 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 16 – 18 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
17 |
ME 🡪 E-USS |
Setup |
Call is established |
|
18 |
User 🡪 ME |
Call is terminated after a few seconds |
SMS-PP (Data Download) Message 1.1.1
Logically:
SMS TPDU
TP-MTI SMS-DELIVER
TP-MMS No more messages waiting for the MS in this SC
TP-RP TP-Reply-Path is not set in this SMS-DELIVER
TP-UDHI TP-UD field contains only the short message
TP-SRI A status report will not be returned to the SME
TP-OA
TON International number
NPI "ISDN / telephone numbering plan"
Address value "1234"
TP-PID (U)SIM Data download
TP-DCS
Coding Group General Data Coding
Compression Text is uncompressed
Message Class Class 2 (U)SIM Specific Message
Alphabet 8 bit data
TP-SCTS: 01/01/98 00:00:00 +0
TP-UDL 13
TP-UD "Short Message"
Coding:
|
Coding |
04 |
04 |
91 |
21 |
43 |
7F |
16 |
89 |
10 |
10 |
00 |
00 |
|
00 |
00 |
0D |
53 |
68 |
6F |
72 |
74 |
20 |
4D |
65 |
73 |
|
|
73 |
61 |
67 |
65 |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1
Logically:
SMS-PP Download
Device identities
Source device: Network
Destination device: UICC
Address
TON International number
NPI "ISDN / telephone numbering plan"
Dialling number string "112233445566778"
SMS TPDU
TP-MTI SMS-DELIVER
TP-MMS No more messages waiting for the MS in this SC
TP-RP TP-Reply-Path is not set in this SMS-DELIVER
TP-UDHI TP-UD field contains only the short message
TP-SRI A status report will not be returned to the SME
TP-OA
TON International number
NPI "ISDN / telephone numbering plan"
Address value "1234"
TP-PID (U)SIM Data download
TP-DCS
Coding Group General Data Coding
Compression Text is uncompressed
Message Class Class 2 (U)SIM Specific Message
Alphabet 8 bit data
TP-SCTS: 01/01/98 00:00:00 +0
TP-UDL 13
TP-UD "Short Message"
Coding:
|
BER-TLV: |
D1 |
2D |
82 |
02 |
83 |
81 |
06 |
09 |
91 |
11 |
22 |
33 |
|
44 |
55 |
66 |
77 |
F8 |
8B |
1C |
04 |
04 |
91 |
21 |
43 |
|
|
7F |
16 |
89 |
10 |
10 |
00 |
00 |
00 |
00 |
0D |
53 |
68 |
|
|
6F |
72 |
74 |
20 |
4D |
65 |
73 |
73 |
61 |
67 |
65 |
PROACTIVE COMMAND: REFRESH 1.1.1
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and File Change Notification
Device identities
Source device: UICC
Destination device: ME
File List: EF EST
Coding:
|
BER-TLV: |
D0 |
12 |
81 |
03 |
01 |
01 |
02 |
82 |
02 |
81 |
82 |
92 |
|
07 |
01 |
3F |
00 |
7F |
FF |
6F |
56 |
TERMINAL RESPONSE: REFRESH 1.1.1A
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and File Change Notification
Device identities
Source device: ME
Destination device: UICC
Result
General Result: Command performed successfully
Coding:
|
BER-TLV: |
81 |
03 |
01 |
01 |
02 |
82 |
02 |
82 |
81 |
83 |
01 |
00 |
TERMINAL RESPONSE: REFRESH 1.1.1B
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and File Change Notification
Device identities
Source device: ME
Destination device: UICC
Result
General Result: REFRESH performed with additional EFs read
Coding:
|
BER-TLV: |
81 |
03 |
01 |
01 |
02 |
82 |
02 |
82 |
81 |
83 |
01 |
03 |
Expected Sequence 1.2 (REFRESH after change eCall mode, enable FDN in EFEST, E-UTRAN)
|
Step |
Direction |
MESSAGE / Action |
Comments |
|
1 |
User 🡪 ME ME 🡪 E-USS |
Set up an eCall |
[Call is established and maintained using the number in EFSDN] |
|
2 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
3 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 3 – 5 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
4 |
ME 🡪 E-USS |
Setup |
Call is established |
|
5 |
User 🡪 ME |
Call is terminated after a few seconds |
|
|
6 |
E-USS 🡪 ME |
SMS-PP Data Download |
|
|
7 |
ME 🡪 UICC |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1 |
|
|
8 |
UICC → ME |
SMS-PP Data Download UICC Acknowledgement |
[SW ’90 00′] |
|
9 |
ME 🡪 E-USS |
SMS-PP Data Download UICC Acknowledgement (RP-ACK) message. |
|
|
10 |
UICC |
EFEST contents state FDN is enabled |
[New EFEST value: 01] |
|
11 |
UICC 🡪 ME |
PROACTIVE COMMAND PENDING: REFRESH 1.2.1 |
|
|
12 |
ME 🡪 UICC |
FETCH |
|
|
13 |
ME → UICC |
USIM Initialization including send STATUS[P1=’01’] |
[ME performs USIM initialization in accordance with TS 31.111 [15] clause 6.4.7] |
|
14 |
UICC 🡪 ME |
PROACTIVE COMMAND: REFRESH 1.2.1 |
|
|
15 |
ME → UICC |
TERMINAL RESPONSE: REFRESH 1.2.1A or TERMINAL RESPONSE: REFRESH 1.2.1B |
[additional EFs read] |
|
16 |
ME→ E-USS |
Set up an eCall |
[Call is established using the number located in EFFDN] |
|
17 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
18 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 18 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
19 |
ME 🡪 User |
Call set up not allowed |
PROACTIVE COMMAND: REFRESH 1.2.1
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and Full File Change Notification
Device identities
Source device: UICC
Destination device: ME
Coding:
|
BER-TLV: |
D0 |
09 |
81 |
03 |
01 |
01 |
00 |
82 |
02 |
81 |
82 |
TERMINAL RESPONSE: REFRESH 1.2.1A
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and Full file Change Notification
Device identities
Source device: ME
Destination device: UICC
Result
General Result: Command performed successfully
Coding:
|
BER-TLV: |
81 |
03 |
01 |
01 |
00 |
82 |
02 |
82 |
81 |
83 |
01 |
00 |
TERMINAL RESPONSE: REFRESH 1.2.1B
Logically:
Command details
Command number: 1
Command type: REFRESH
Command qualifier: USIM Initialization and full File change Notification
Device identities
Source device: ME
Destination device: UICC
Result
General Result: REFRESH performed with additional EFs read
Coding:
|
BER-TLV: |
81 |
03 |
01 |
01 |
00 |
82 |
02 |
82 |
81 |
83 |
01 |
03 |
Expected Sequence 1.3 (REFRESH after changing eCall mode, disable FDN in EFEST, IMS Emergency Services in E-UTRAN)
|
Step |
Direction |
MESSAGE / Action |
Comments |
|
1 |
User 🡪 ME ME 🡪 E-USS |
Set up an eCall |
[Call is established using the number in EFFDNURI] |
|
2 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
3 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
4 |
ME 🡪 User |
Call set up not allowed |
|
|
5 |
E-USS 🡪 ME |
SMS-PP Data Download |
|
|
6 |
ME 🡪 UICC |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1 |
|
|
7 |
UICC → ME |
SMS-PP Data Download UICC Acknowledgement |
[SW ’90 00′] |
|
8 |
ME 🡪 E-USS |
SMS-PP Data Download UICC acknowledgement (RP-ACK) message. |
|
|
9 |
UICC |
EFEST contents state FDN is disabled |
New EFEST value: 00 |
|
10 |
UICC 🡪 ME |
PROACTIVE COMMAND PENDING: REFRESH 1.1.1 |
|
|
11 |
ME 🡪 UICC |
FETCH |
|
|
12 |
UICC 🡪 ME |
PROACTIVE COMMAND: REFRESH 1.1.1 |
|
|
13 |
ME → UICC |
TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B |
[additional EFs read] |
|
14 |
User 🡪 ME ME→ E-USS |
Set up an eCall |
[Call is established using the number located in EFSDNURI] |
|
15 |
|||
|
16 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
17 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 17 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
18 |
ME 🡪 E-USS |
Setup |
Call is established |
|
19 |
User 🡪 ME |
Call is terminated after a few seconds |
Expected Sequence 1.4 (REFRESH after changing eCall mode, disable FDN in EFEST, UTRAN/GERAN)
|
Step |
Direction |
MESSAGE / Action |
Comments |
|
1 |
User 🡪 ME ME 🡪 USS |
Set up an eCall |
[Call is established using the number in EFFDN] |
|
2 |
User 🡪 ME |
Call is terminated after a few seconds |
|
|
3 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 3 – 4 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
4 |
ME 🡪 User |
Call set up not allowed |
|
|
5 |
USS 🡪 ME |
SMS-PP Data Download |
|
|
6 |
ME 🡪 UICC |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1 |
|
|
7 |
UICC → ME |
SMS-PP Data Download UICC Acknowledgement |
[SW ’90 00′] |
|
8 |
ME 🡪 USS |
SMS-PP Data Download UICC acknowledgement (RP-ACK) message. |
|
|
9 |
UICC |
EFEST contents state FDN is disabled |
[New EFEST value: 00] |
|
10 |
UICC 🡪 ME |
PROACTIVE COMMAND PENDING: REFRESH 1.1.1 |
|
|
ME 🡪 UICC |
FETCH |
||
|
11 |
|||
|
12 |
UICC 🡪 ME |
PROACTIVE COMMAND: REFRESH 1.1.1 |
|
|
13 |
ME → UICC |
TERMINAL RESPONSE: REFRESH 1.1.1A or TERMINAL RESPONSE: REFRESH 1.1.1B |
[additional EFs read] |
|
14 |
User 🡪 ME ME→ USS |
Set up an eCall |
[Call is established using the number located in EFSDN] |
|
15 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
16 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 16 – 18 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
17 |
ME 🡪 E-USS |
Setup |
Call is established |
|
18 |
User 🡪 ME |
Call is terminated after a few seconds |
Expected Sequence 1.5 (REFRESH after change eCall mode, enable FDN in EFEST, UTRAN/GERAN)
|
Step |
Direction |
MESSAGE / Action |
Comments |
|
1 |
User 🡪 ME ME 🡪 USS |
Set up an eCall |
[Call is established and maintained using the number in EFSDN.] |
|
2 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
3 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 3 – 5 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
4 |
ME 🡪 E-USS |
Setup |
Call is established |
|
5 |
User 🡪 ME |
Call is terminated after a few seconds |
|
|
6 |
USS 🡪 ME |
SMS-PP Data Download |
|
|
7 |
ME 🡪 UICC |
ENVELOPE: SMS-PP DOWNLOAD 1.1.1 |
|
|
8 |
UICC → ME |
SMS-PP Data Download UICC Acknowledgement |
[SW ’90 00′] |
|
9 |
ME 🡪 USS |
SMS-PP Data Download UICC Acknowledgement (RP-ACK) message. |
|
|
10 |
UICC |
EFEST contents state FDN is enabled |
[New EFEST value: 01] |
|
11 |
UICC 🡪 ME |
PROACTIVE COMMAND PENDING: REFRESH 1.2.1 |
|
|
12 |
ME 🡪 UICC |
FETCH |
|
|
13 |
ME → UICC |
USIM Initialization including send STATUS[P1=’01’] |
[ME performs USIM initialization in accordance with TS 31.111 [15] clause 6.4.7] |
|
14 |
UICC 🡪 ME |
PROACTIVE COMMAND: REFRESH 1.2.1 |
|
|
15 |
ME → UICC |
TERMINAL RESPONSE: REFRESH 1.2.1A or TERMINAL RESPONSE: REFRESH 1.2.1B |
[additional EFs read] |
|
16 |
ME→ USS |
Set up an eCall |
[Call is established using the number located in EFFDN.] |
|
17 |
User 🡪 ME |
Call is terminated after a few seconds. |
|
|
18 |
User 🡪 ME |
Set up a normal call to "54321" |
Steps 18 – 19 apply only if the ME supports A.1/87 AND A.1/85, else these steps should be skipped. |
|
19 |
ME 🡪 User |
Call set up not allowed |
27.22.12.4.3 Test requirement
The ME shall operate in the manner defined in expected sequence 1.1 to 1.5.