Skip to content
TechSpec
  • Foreword
  • 1 Scope
  • 2 References
  • 3 Definitions, abbreviations and symbols
  • 4 Overview of USAT
  • 5 Profile download
  • 6 Proactive UICC
  • 7 ENVELOPE Commands
  • 8 COMPREHENSION-TLV data objects
  • 9 Tag values
  • 10 Allowed Type of command and Device identity combinations
  • 11 Security requirements
  • N.1 MMI Mode
  • N.2 Application Mode
  • N.3 USSD Data Download
  • Q.0 3GPP-specific facilities
  • Q.1 Default routing mechanism
  • Q.2 Combination rules for terminal profiles
  • R.1 Discovery of the UICC's IARI and IMS Registration
  • R.2 Notification of Incoming IMS data
  • R.3 UICC originating a SIP message
  • T.1 Introduction
  • T.2 Success activation of PDP/PDN/PDU request flow example
  • T.3 Rejected activation of PDP/PDN/PDU request flow example
  • T.4 PDP/PDN/PDU Data connection deactivated flow example

T.1 Introduction

31.1113GPPRelease 18TSUniversal Subscriber Identity Module (USIM) Application Toolkit (USAT)

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

This annex applies if class "e" is supported.

The flowcharts provided in this annex are illustrative examples. The listing of commands is not exhaustive and the timing/order of commands may differ. They are illustrating how after a completion of PDP, PDN or PDU procedure, initiated by Network or by the ME, a new Data connection status change event is sent to the UICC.