4.4.13 Contents of files at the DF 5G ProSe level
31.1023GPPCharacteristics of the Universal Subscriber Identity Module (USIM) applicationRelease 17TS
4.4.13.1 Introduction
This clause describes the additional files that are used for 5G ProSe purposes. The EFs in the Dedicated File DF5G_ProSe contain configuration data related to 5G ProSe, as specified in 3GPP TS 24.554 [114].
DF5G_ProSe shall be present at the ADFUSIM level if service nº139 is "available" in EFUST.
4.4.13.2 EF5G_PROSE_ST (5G ProSe Service Table)
If service n°139 is "available" in the USIM Service Table, this file shall be present. This EF indicates which 5G ProSe services are available. If a service is not indicated as available in the 5G ProSe Service Table, the ME shall not select this service.
|
Identifier: ‘4F01’ |
Structure: transparent |
Optional |
||||
|
SFI: ’01’ |
||||||
|
File size: X bytes, (X ≥ 1) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 |
Services n°1 to n°8 |
M |
1 byte |
|||
|
2 |
Services n°9 to n°16 |
O |
1 byte |
|||
|
etc. |
||||||
|
X |
Services n°(8X‑7) to n°(8X) |
O |
1 byte |
|||
|
Services |
||
|
Contents: |
Service n°1: |
5G ProSe configuration data for direct discovery |
|
Service n°2: |
5G ProSe configuration data for direct communication |
|
|
Service n°3: |
5G ProSe configuration data for UE-to-network relay UE |
|
|
Service n°4: |
5G ProSe configuration data for remote UE |
|
|
Service n°5: |
5G ProSe configuration data for usage information reporting |
The EF shall contain at least one byte for services. Further bytes may be included, but if the EF includes an optional byte, then it is mandatory for the EF to also contain all bytes before that byte. Other services are possible in the future and will be coded on further bytes in the EF.
Coding:
Same as coding of USIM Service Table.
4.4.13.3 EF5G_PROSE_DD (5G ProSe configuration data for direct discovery)
If service n°139 is "available" in the USIM Service Table and service n°1 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for direct discovery. The format of the 5G ProSe policy for direct discovery are specified in 3GPP TS 24.555 [115].
|
Identifier: ‘4F02’ |
Structure: Transparent |
Optional |
||||
|
SFI: ’02’ |
||||||
|
File size: X bytes, (X ≥ 26) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 to X |
5G ProSe configuration data for direct discovery TLV objects |
M |
X bytes |
|||
The 5G ProSe configuration data for direct discovery data object parameters tags:
|
Description |
Tag Value |
|
5G ProSe configuration data for direct discovery Tag |
‘A0’ |
|
Served by NG-RAN Tag |
’80’ |
|
Not served by NG-RAN Tag |
’81’ |
|
ProSe identifiers Tag |
’82’ |
|
ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag |
’83’ |
|
Group member discovery parameters Tag |
’84’ |
|
Validity timer Tag |
’85’ |
|
ProSe direct discovery UE ID Tag |
’86’ |
|
HPLMN 5G DDNMF address information Tag |
’98’ |
The 5G ProSe configuration data for direct discovery contents:
|
Description |
Value |
M/O |
Length (bytes) |
|
5G ProSe configuration data for direct discovery Tag |
‘A0’ |
M |
1 |
|
Length |
Note 1 |
M |
Note 2 |
|
Validity timer Tag |
’85’ |
M |
1 |
|
Length |
5 |
M |
Note 2 |
|
Validity timer information |
— |
M |
5 |
|
Served by NG-RAN Tag |
’80’ |
M |
1 |
|
Length |
X1 |
M |
Note 2 |
|
Served by NG-RAN information |
— |
M |
X1 |
|
Not served by NG-RAN Tag |
’81’ |
M |
1 |
|
Length |
X2 |
M |
Note 2 |
|
Not served by NG-RAN information |
— |
M |
X2 |
|
ProSe direct discovery UE ID Tag |
’86’ |
M |
1 |
|
Length |
3 |
M |
Note 2 |
|
ProSe direct discovery UE ID information |
— |
M |
3 |
|
ProSe identifiers Tag |
’82’ |
M |
1 |
|
Length |
X3 |
M |
Note 2 |
|
ProSe identifiers information |
— |
M |
X3 |
|
ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag |
’83’ |
M |
1 |
|
Length |
X4 |
M |
Note 2 |
|
ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information |
— |
M |
X4 |
|
Group member discovery parameters Tag |
’84’ |
O |
1 |
|
Length |
X5 |
O |
Note 2 |
|
Group member discovery parameters information |
— |
O |
X5 |
|
HPLMN 5G DDNMF address information Tag |
’98’ |
O |
1 |
|
Length |
X6+1 |
O |
Note 2 |
|
HPLMN 5G DDNMF address information type |
— |
O |
1 |
|
HPLMN 5G DDNMF address information information |
— |
O |
X6 |
|
Note 1: This is the total size of the constructed TLV object. Note 2: The length is coded according to ISO/IEC 8825-1 [35]. |
|||
– Validity timer Tag ’85’
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for direct discovery.
Coding:
The Validity timer information is encoded as shown in figure 5.3.2.1 and table 5.3.2.1 of 3GPP TS 24.555 [115].
– Served by NG-RAN Tag ’80’
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for direct discovery when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in figures 5.3.2.2 to 5.3.2.5 and tables 5.3.2.2 to 5.3.2.5 of 3GPP TS 24.555 [115].
– Not served by NG-RAN Tag ’81’
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for direct discovery when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in figures 5.3.2.6 to 5.3.2.11a and tables 5.3.2.6 to 5.3.2.11a of 3GPP TS 24.555 [115].
– ProSe direct discovery UE ID
Contents:
The ProSe direct discovery UE ID information contains ProSe direct discovery UE ID for restricted direct discovery.
Coding:
The ProSe direct discovery UE ID information is encoded as shown in figure 5.3.2.1 and table 5.3.2.1 of 3GPP TS 24.555 [115].
– ProSe identifiers Tag ’82’
Contents:
The ProSe identifiers information contains ProSe application identifiers to be used for direct discovery.
Coding:
The ProSe identifiers information is encoded as shown in figure 5.3.2.14 and table 5.3.2.14 of 3GPP TS 24.555 [115].
– ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules Tag ’83’
Contents:
The ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information contains a list of ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules.
Coding:
The ProSe identifier to default destination layer-2 ID for initial discovery signalling mapping rules information is encoded as shown in figures 5.3.2.15 to 5.3.2.16 and tables 5.3.2.15 to 5.3.2.16 of 3GPP TS 24.555 [115].
– Group member discovery parameters Tag ’84’
Contents:
The Group member discovery parameters information contains group member discovery parameters.
Coding:
The Group member discovery parameters information is encoded as shown in figures 5.3.2.12 to 5.3.2.13 and tables 5.3.2.12 to 5.3.2.13 of 3GPP TS 24.555 [115].
– HPLMN 5G DDNMF address information Tag ’98’
Contents:
The HPLMN 5G DDNMF address information information contains the HPLMN 5G DDNMF address information type and the HPLMN 5G DDNMF address information.
Coding:
The HPLMN 5G DDNMF address information type indicates the type of the HPLMN 5G DDNMF address information. A value of ’00’ indicates FQDN, a value of ’01’ indicates IPv4, a value of ’02’ indicates IPv6, a value of ’03’ indicates IPv4v6. All other values are reserved.
The HPLMN 5G DDNMF address information information is encoded as shown in figures 5.3.2.17 and tables 5.3.2.17 of 3GPP TS 24.555 [115].
4.4.13.4 EF5G_PROSE_DC (5G ProSe configuration data for direct communication)
If service n°139 is "available" in the USIM Service Table and service n°2 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for direct communication. The format of the 5G ProSe policy for direct communication are specified in 3GPP TS 24.555 [115].
|
Identifier: ‘4F03’ |
Structure: Transparent |
Optional |
||||
|
SFI: ’03’ |
||||||
|
File size: X bytes bytes, (X ≥ 12) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 to X |
5G ProSe configuration data for direct communication TLV objects |
M |
X bytes |
|||
The 5G ProSe configuration data for direct communication data object parameters tags:
|
Description |
Tag Value |
|
5G ProSe configuration data for direct communication Tag |
‘A0’ |
|
Served by NG-RAN Tag |
’80’ |
|
Not served by NG-RAN Tag |
’81’ |
|
Privacy config Tag |
’87’ |
|
5G ProSe direct communication in NR-PC5 Tag |
’88’ |
|
ProSe application to path preference mapping rules Tag |
’89’ |
|
Validity timer Tag |
’85’ |
|
ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag |
’91’ |
The 5G ProSe configuration data for direct communication contents:
|
Description |
Value |
M/O |
Length (bytes) |
|
5G ProSe configuration data for direct communication Tag |
‘A0’ |
M |
1 |
|
Length |
Note 1 |
M |
Note 2 |
|
Validity timer Tag |
’85’ |
M |
1 |
|
Length |
5 |
M |
Note 2 |
|
Validity timer information |
— |
M |
5 |
|
Served by NG-RAN Tag |
’80’ |
M |
1 |
|
Length |
X1 |
M |
Note 2 |
|
Served by NG-RAN information |
— |
M |
X1 |
|
Not served by NG-RAN Tag |
’81’ |
O |
1 |
|
Length |
X2 |
O |
Note 2 |
|
Not served by NG-RAN information |
— |
O |
X2 |
|
Privacy config Tag |
’87’ |
O |
1 |
|
Length |
X3 |
O |
Note 2 |
|
Privacy config information |
— |
O |
X3 |
|
5G ProSe direct communication in NR-PC5 Tag |
’88’ |
O |
1 |
|
Length |
X4 |
O |
Note 2 |
|
5G ProSe direct communication in NR-PC5 information |
— |
O |
X4 |
|
ProSe application to path preference mapping rules Tag |
’89’ |
O |
1 |
|
Length |
X5 |
O |
Note 2 |
|
ProSe application to path preference mapping rules information |
— |
O |
X5 |
|
ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag |
’91’ |
O |
1 |
|
Length |
X6 |
O |
Note 2 |
|
ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information |
— |
O |
X6 |
|
Note 1: This is the total size of the constructed TLV object. Note 2: The length is coded according to ISO/IEC 8825-1 [35]. |
|||
– Validity timer Tag ’85’
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for direct communication.
Coding:
The Validity timer information is encoded as shown in figure 5.4.2.1 and table 5.4.2.1 of 3GPP TS 24.555 [115].
– Served by NG-RAN Tag ’80’
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for direct communication when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in figures 5.4.2.2 to 5.4.2.4 and tables 5.4.2.2 to 5.4.2.4 of 3GPP TS 24.555 [115].
– Not served by NG-RAN Tag ’81’
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for direct communication when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in figures 5.4.2.5 to 5.4.2.10c and tables 5.4.2.5 to 5.4.2.10c of 3GPP TS 24.555 [115].
– Privacy config Tag ’87’
Contents:
The Privacy config information contains configuration parameters for privacy configuration.
Coding:
The Privacy config information is encoded as shown in figures 5.4.2.11 to 5.4.2.15 and tables 5.4.2.11 to 5.4.2.15 of 3GPP TS 24.555 [115].
– 5G ProSe direct communication in NR-PC5 Tag ’88’
Contents:
The 5G ProSe direct communication in NR-PC5 information contains configuration parameters for 5G ProSe direct communication in NR-PC5.
Coding:
The 5G ProSe direct communication in NR-PC5 information is encoded as shown in figures 5.4.2.16 to 5.4.2.38 and tables 5.4.2.16 to 5.4.2.38 of 3GPP TS 24.555 [115].
– ProSe application to path preference mapping rules Tag ’89’
Contents:
The ProSe application to path preference mapping rules information contains a list of ProSe application to path preference mapping rules.
Coding:
The ProSe application to path preference mapping rules information is encoded as shown in figures 5.4.2.39 to 5.4.2.40 and tables 5.4.2.39 to 5.4.2.40 of 3GPP TS 24.555 [115].
– ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules Tag ’91’
Contents:
The ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information contains a list of ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules.
Coding:
The ProSe identifiers to NR Tx profile for broadcast and groupcast mapping rules information is encoded as shown in figures 5.4.2.41 to 5.4.2.42 and tables 5.4.2.41 to 5.4.2.42 of 3GPP TS 24.555 [115].
4.4.13.5 EF5G_PROSE_U2NRU (5G ProSe configuration data for UE-to-network relay UE)
If service n°139 is "available" in the USIM Service Table and service n°3 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for UE-to-network relay UE. The format of the 5G ProSe policy for UE-to-network relay UE are specified in 3GPP TS 24.555 [115].
|
Identifier: ‘4F04’ |
Structure: Transparent |
Optional |
||||
|
SFI: ’04’ |
||||||
|
File size: X bytes bytes, (X ≥ 32) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 to X |
5G ProSe configuration data for UE-to-network relay UE TLV objects |
M |
X bytes |
|||
The 5G ProSe configuration data for UE-to-network relay UE data object parameters tags:
|
Description |
Tag Value |
|
5G ProSe configuration data for UE-to-network relay UE Tag |
‘A0’ |
|
Served by NG-RAN Tag |
’80’ |
|
Not served by NG-RAN Tag |
’81’ |
|
Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag |
‘8A’ |
|
RSC info list Tag |
‘8B’ |
|
5QI to PC5 QoS parameters mapping rules Tag |
‘8C’ |
|
ProSe identifier to ProSe application server address mapping rules Tag |
‘8D’ |
|
Validity timer Tag |
’85’ |
|
User info ID for discovery Tag |
‘8E’ |
|
Privacy timer Tag |
’92’ |
|
5G PKMF address information Tag |
’93’ |
The 5G ProSe configuration data for UE-to-network relay UE contents:
|
Description |
Value |
M/O |
Length (bytes) |
|
5G ProSe configuration data for UE-to-network relay UE Tag |
‘A0’ |
M |
1 |
|
Length |
Note 1 |
M |
Note 2 |
|
Validity timer Tag |
’85’ |
M |
1 |
|
Length |
5 |
M |
Note 2 |
|
Validity timer information |
— |
M |
5 |
|
Served by NG-RAN Tag |
’80’ |
M |
1 |
|
Length |
X1 |
M |
Note 2 |
|
Served by NG-RAN information |
— |
M |
X1 |
|
Not served by NG-RAN Tag |
’81’ |
M |
1 |
|
Length |
X2 |
M |
Note 2 |
|
Not served by NG-RAN information |
— |
M |
X2 |
|
Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag |
‘8A’ |
M |
1 |
|
Length |
X3 |
M |
Note 2 |
|
Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information |
— |
M |
X3 |
|
User info ID for discovery Tag |
‘8E’ |
M |
1 |
|
Length |
6 |
M |
Note 2 |
|
User info ID for discovery information |
— |
M |
6 |
|
RSC info list Tag |
‘8B’ |
M |
1 |
|
Length |
X4 |
M |
Note 2 |
|
RSC info list information |
— |
M |
X4 |
|
5QI to PC5 QoS parameters mapping rules Tag |
‘8C’ |
M |
1 |
|
Length |
X5 |
M |
Note 2 |
|
5QI to PC5 QoS parameters mapping rules information |
— |
M |
X5 |
|
ProSe identifier to ProSe application server address mapping rules Tag |
‘8D’ |
O |
1 |
|
Length |
X6 |
O |
Note 2 |
|
ProSe identifier to ProSe application server address mapping rules information |
— |
O |
X6 |
|
Privacy timer Tag |
’92’ |
O |
1 |
|
Length |
X7 |
O |
Note 2 |
|
Privacy timer information |
— |
O |
X7 |
|
5G PKMF address information Tag |
’93’ |
O |
1 |
|
Length |
X8 |
O |
Note 2 |
|
5G PKMF address information information |
— |
O |
X8 |
|
Note 1: This is the total size of the constructed TLV object. Note 2: The length is coded according to ISO/IEC 8825-1 [35]. |
|||
– Validity timer Tag ’85’
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for UE-to-network relay UE.
Coding:
The Validity timer information is encoded as shown in figure 5.5.2.1 and table 5.5.2.1 of 3GPP TS 24.555 [115].
– Served by NG-RAN Tag ’80’
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for UE-to-network relay UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in figures 5.5.2.2 to 5.5.2.4 and tables 5.5.2.2 to 5.5.2.4 of 3GPP TS 24.555 [115].
– Not served by NG-RAN Tag ’81’
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for UE-to-network relay UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in figures 5.5.2.5 to 5.5.2.11a and tables 5.5.2.5 to 5.5.2.11a of 3GPP TS 24.555 [115].
– Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation Tag ‘8A’
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information contains the default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for announcement and additional information and for receiving the discovery signalling for solicitation information is encoded as shown in figure 5.5.2.11b and table 5.5.2.11b of 3GPP TS 24.555 [115].
– User info ID for discovery Tag ‘8E’
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe UE-to-network relay UE.
Coding:
The User info ID for discovery information is encoded as shown in figure 5.5.2.1 and table 5.5.2.1 of 3GPP TS 24.555 [115].
– RSC info list Tag ‘8B’
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in figures 5.5.2.12 to 5.5.2.16 and tables 5.5.2.12 to 5.5.2.16 of 3GPP TS 24.555 [115].
– 5QI to PC5 QoS parameters mapping rules Tag ‘8C’
Contents:
The 5QI to PC5 QoS parameters mapping rules information contains a list of 5QI to PC5 QoS parameters mapping rules.
Coding:
The 5QI to PC5 QoS parameters mapping rules information is encoded as shown in figures 5.5.2.17 to 5.5.2.18 and tables 5.5.2.17 to 5.5.2.18 of 3GPP TS 24.555 [115].
– ProSe identifier to ProSe application server address mapping rules Tag ‘8D’
Contents:
The ProSe identifier to ProSe application server address mapping rules information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The ProSe identifier to ProSe application server address mapping rules information is encoded as shown in figures 5.5.2.19 to 5.5.2.20 and tables 5.5.2.19 to 5.5.2.20 of 3GPP TS 24.555 [115].
– Privacy timer Tag ’92’
Contents:
The Privacy timer information contains a binary encoded duration, in units of seconds, after which the UE shall change the source layer-2 ID self-assigned by the UE while performing transmission of 5G ProSe direct communication.
Coding:
The privacy timer information is encoded as shown in figures 5.5.2.1 and tables 5.5.2.1 of 3GPP TS 24.555 [115].
– 5G PKMF address information Tag ’93’
Contents:
The 5G PKMF address information information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The 5G PKMF address information information is encoded as shown in figures 5.5.2.21 to 5.5.2.23 and tables 5.5.2.21 of 3GPP TS 24.555 [115].
4.4.13.6 EF5G_PROSE_RU (5G ProSe configuration data for remote UE)
If service n°139 is "available" in the USIM Service Table and service n°4 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for remote UE. The format of the 5G ProSe policy for remote UE are specified in 3GPP TS 24.555 [115].
|
Identifier: ‘4F05’ |
Structure: Transparent |
Optional |
||||
|
SFI: ’05’ |
||||||
|
File size: X bytes bytes, (X ≥ 29) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 to X |
5G ProSe configuration data for remote UE TLV objects |
M |
X bytes |
|||
The 5G ProSe configuration data for remote UE data object parameters tags:
|
Description |
Tag Value |
|
5G ProSe configuration data for remote UE Tag |
‘A0’ |
|
Served by NG-RAN Tag |
’80’ |
|
Not served by NG-RAN Tag |
’81’ |
|
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag |
‘8F’ |
|
RSC info list Tag |
‘8B’ |
|
N3IWF selection information for 5G ProSe layer-3 remote UE Tag |
’90’ |
|
Validity timer Tag |
’85’ |
|
User info ID for discovery Tag |
‘8E’ |
|
Privacy timer Tag |
’92’ |
|
5G PKMF address information Tag |
’93’ |
The 5G ProSe configuration data for remote UE contents:
|
Description |
Value |
M/O |
Length (bytes) |
|
5G ProSe configuration data for remote UE Tag |
‘A0’ |
M |
1 |
|
Length |
Note 1 |
M |
Note 2 |
|
Validity timer Tag |
’85’ |
M |
1 |
|
Length |
5 |
M |
Note 2 |
|
Validity timer information |
— |
M |
5 |
|
Served by NG-RAN Tag |
’80’ |
M |
1 |
|
Length |
X1 |
M |
Note 2 |
|
Served by NG-RAN information |
— |
M |
X1 |
|
Not served by NG-RAN Tag |
’81’ |
M |
1 |
|
Length |
X2 |
M |
Note 2 |
|
Not served by NG-RAN information |
— |
M |
X2 |
|
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag |
‘8F’ |
M |
1 |
|
Length |
X3 |
M |
Note 2 |
|
Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information |
— |
M |
X3 |
|
User info ID for discovery Tag |
‘8E’ |
M |
1 |
|
Length |
6 |
M |
Note 2 |
|
User info ID for discovery information |
— |
M |
6 |
|
RSC info list Tag |
‘8B’ |
M |
1 |
|
Length |
X4 |
M |
Note 2 |
|
RSC info list information |
— |
M |
X4 |
|
N3IWF selection information for 5G ProSe layer-3 remote UE Tag |
’90’ |
O |
1 |
|
Length |
X5 |
O |
Note 2 |
|
N3IWF selection information for 5G ProSe layer-3 remote UE information |
— |
O |
X5 |
|
Privacy timer Tag |
’92’ |
O |
1 |
|
Length |
2 |
O |
Note 2 |
|
Privacy timer information |
— |
O |
2 |
|
5G PKMF address information Tag |
’93’ |
O |
1 |
|
Length |
X6 |
O |
Note 2 |
|
5G PKMF address information information |
— |
O |
X6 |
|
Note 1: This is the total size of the constructed TLV object. Note 2: The length is coded according to ISO/IEC 8825-1 [35]. |
|||
– Validity timer Tag ’85’
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for remote UE.
Coding:
The Validity timer information is encoded as shown in figure 5.6.2.1 and table 5.6.2.1 of 3GPP TS 24.555 [115].
– Served by NG-RAN Tag ’80’
Contents:
The Served by NG-RAN information contains 5G ProSe configuration parameters for remote UE when the UE is served by NG-RAN.
Coding:
The Served by NG-RAN information is encoded as shown in figures 5.6.2.2 to 5.6.2.4 and tables 5.6.2.2 to 5.6.2.4 of 3GPP TS 24.555 [115].
– Not served by NG-RAN Tag ’81’
Contents:
The Not served by NG-RAN information contains 5G ProSe configuration parameters for remote UE when the UE is not served by NG-RAN.
Coding:
The Not served by NG-RAN information is encoded as shown in figures 5.6.2.5 to 5.6.2.11a and tables 5.6.2.5 to 5.6.2.11a of 3GPP TS 24.555 [115].
– Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information Tag ‘8F’
Contents:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information contains the default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information.
Coding:
The Default destination layer-2 IDs for sending the discovery signalling for solicitation and for receiving the discovery signalling for announcement and additional information information is encoded as shown in figures 5.6.2.11b and tables 5.6.2.11b of 3GPP TS 24.555 [115].
– User info ID for discovery Tag ‘8E’
Contents:
The User info ID for discovery information contains the user info ID for 5G ProSe remote UE.
Coding:
The User info ID for discovery information is encoded as shown in figure 5.6.2.1 and table 5.6.2.1 of 3GPP TS 24.555 [115].
– RSC info list Tag ‘8B’
Contents:
The RSC info list information contains a list of RSCs related parameters.
Coding:
The RSC info list information is encoded as shown in figures 5.6.2.12 to 5.6.2.16a and tables 5.6.2.12 to 5.6.2.16a of 3GPP TS 24.555 [115].
– N3IWF selection information for 5G ProSe layer-3 remote UE Tag ’90’
Contents:
The N3IWF selection information for 5G ProSe layer-3 remote UE information contains two parts:
1) N3IWF identifier configuration (either FQDN or IP address) for 5G ProSe layer-3 remote UE; and
2) 5G ProSe layer-3 UE-to-network relay access node selection information.
Coding:
The N3IWF selection information for 5G ProSe layer-3 remote UE information is encoded as shown in figures 5.6.2.17 to 5.6.2.19 and tables 5.6.2.17 to 5.6.2.19 of 3GPP TS 24.555 [115].
– Privacy timer Tag ’92’
Contents:
The Privacy timer information contains a binary encoded duration, in units of seconds, after which the UE shall change the source layer-2 ID self-assigned by the UE while performing transmission of 5G ProSe direct communication.
Coding:
The privacy timer information is encoded as shown in figures 5.6.2.1 and tables 5.6.2.1 of 3GPP TS 24.555 [115].
– 5G PKMF address information Tag ’93’
Contents:
The 5G PKMF address information information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The 5G PKMF address information information is encoded as shown in figures 5.5.2.21 to 5.5.2.23 and tables 5.5.2.21 of 3GPP TS 24.555 [115].
4.4.13.7 EF5G_PROSE_UIR (5G ProSe configuration data for usage information reporting)
If service n°139 is "available" in the USIM Service Table and service n°5 is "available" in EF5G_PROSE_ST, this file shall be present. This EF contains 5G ProSe policy for usage information reporting. The format of the 5G ProSe policy for usage information reporting are specified in 3GPP TS 24.555 [115].
|
Identifier: ‘4F0Y’ |
Structure: Transparent |
Optional |
||||
|
SFI: ‘0Y’ |
||||||
|
File size: X bytes bytes, (X ≥ 32) |
Update activity: low |
|||||
|
Access Conditions: READ PIN UPDATE ADM DEACTIVATE ADM ACTIVATE ADM |
||||||
|
Bytes |
Description |
M/O |
Length |
|||
|
1 to X |
5G ProSe configuration data for usage information reporting TLV objects |
M |
X bytes |
|||
The 5G ProSe configuration data for usage information reporting data object parameters tags:
|
Description |
Tag Value |
|
5G ProSe configuration data for UE-to-network relay UE Tag |
‘A0’ |
|
Validity timer Tag |
’85’ |
|
Collection period Tag |
’94’ |
|
Reporting window Tag |
’95’ |
|
Reporting indicators Tag |
’96’ |
|
5G DDNMF CTF address for uploading the usage information reports Tag |
’97’ |
The 5G ProSe configuration data for usage information reporting contents:
|
Description |
Value |
M/O |
Length (bytes) |
|
5G ProSe configuration data for usage information reporting Tag |
‘A0’ |
M |
1 |
|
Length |
Note 1 |
M |
Note 2 |
|
Validity timer Tag |
’85’ |
M |
1 |
|
Length |
5 |
M |
Note 2 |
|
Validity timer information |
— |
M |
5 |
|
Collection period Tag |
’94’ |
M |
1 |
|
Length |
3 |
M |
Note 2 |
|
Collection period information |
— |
M |
3 |
|
Reporting window Tag |
’95’ |
M |
1 |
|
Length |
3 |
M |
Note 2 |
|
Reporting window information |
— |
M |
3 |
|
Reporting indicators Tag |
’96’ |
M |
1 |
|
Length |
2 |
M |
Note 2 |
|
Reporting indicators information |
— |
M |
2 |
|
5G DDNMF CTF address for uploading the usage information reports Tag |
’97’ |
M |
1 |
|
Length |
X1 |
M |
Note 2 |
|
5G DDNMF CTF address for uploading the usage information reports information |
— |
M |
X1 |
|
Note 1: This is the total size of the constructed TLV object. Note 2: The length is coded according to ISO/IEC 8825-1 [35]. |
|||
– Validity timer Tag ’85’
Contents:
The Validity timer information contains the timer for controlling the validity of 5G ProSe configuration data for usage information reporting.
Coding:
The Validity timer information is encoded as shown in figure 5.7.2.1 and table 5.7.2.1 of 3GPP TS 24.555 [115].
– Collection period Tag ’94’
Contents:
The Collection period information contains the time interval, in unit of minutes, at which the UE shall generate the usage information reports.
Coding:
The Collection period information is encoded as shown in figures 5.7.2.1 and tables 5.7.2.1 of 3GPP TS 24.555 [115].
– Reporting window Tag ’95’
Contents:
The Reporting window information contains the time window, in units of minutes, during which the UE shall upload the usage information report.
Coding:
The Reporting window information is encoded as shown in figures 5.7.2.1 and tables 5.7.2.1 of 3GPP TS 24.555 [115].
– Reporting indicators Tag ’96’
Contents:
The Reporting indicators information contains the status of several reporting indicators.
Coding:
The reporting indicator is set as follows:
bit = 1: Set indication active
bit = 0: Set indication inactive.
Byte 1:
|
b8 |
b7 |
B6 |
b5 |
b4 |
b3 |
b2 |
b1 |
|||||||||||||||
|
Data received reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
|
Data transmitted reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
|
Time stamps of the first transmission/reception reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
|
Time stamps in and out of NG-RAN coverage reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
|
Group parameters reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
|
UE locations reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
||||||||||||||||||||||
Byte 2:
|
B8 |
b7 |
b6 |
b5 |
b4 |
b3 |
b2 |
b1 |
||||||||||||||||
|
Address type, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
|||||||||||||||||||||||
|
QoS flow reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
|||||||||||||||||||||||
|
Radio parameters reporting indicator, as defined in tables 5.7.2.1 of 3GPP TS 24.555 [115]. |
|||||||||||||||||||||||
|
RFU |
|||||||||||||||||||||||
– 5G DDNMF CTF address for uploading the usage information reports Tag ’97’
Contents:
The 5G DDNMF CTF address for uploading the usage information reports information contains a list of ProSe identifier to ProSe application server address mapping rules.
Coding:
The 5G DDNMF CTF address for uploading the usage information reports information is encoded as shown in figures 5.7.2.1 and tables 5.7.2.1 of 3GPP TS 24.555 [115].