PhysCellId

integer

integer value identifying the physical cell identity (PCI), as definition of "PhysCellId" IE in clause 6.3.2 of 3GPP TS 38.331 [42].

Minimum = 0. Maximum = 1007.

ArfcnValueNR

integer

Integer value indicating the ARFCN applicable for a downlink, uplink or bi-directional (TDD) NR global frequency raster, as definition of "ARFCN-ValueNR" IE in clause 6.3.2 of 3GPP TS 38.331 [42].

Minimum = 0. Maximum = 3279165.

"MINIMUM"

Minimum

"MEDIUM"

Medium

"MAXIMUM"

Maximum

"MINIMUM_WO_VENDOR_EXTENSION"

Minimum without vendor specific extension

"MEDIUM_WO_VENDOR_EXTENSION"

Medium without vendor specific extension

"MAXIMUM_WO_VENDOR_EXTENSION"

Maximum without vendor specific extension

"IMMEDIATE_MDT_ONLY"

Immediate MDT only

"LOGGED_MDT_ONLY"

Logged MDT only

"TRACE_ONLY"

Trace only

"IMMEDIATE_MDT_AND_TRACE"

Immediate MDT and Trace

"RLF_REPORTS_ONLY"

RLF reports only

"RCEF_REPORTS_ONLY"

RCEF reports only

"LOGGED_MBSFN_MDT"

Logged MBSFN MDT

"PERIODICAL"

Periodical

"EVENT_TRIGGED"

Event triggered

"M1"

M1

"M2"

M2

"M3"

M3

"M4_DL"

M4 for DL

"M4_UL"

M4 for UL

"M5_DL"

M5 for DL

"M5_UL"

M5 for UL

"M6_DL"

M6 for DL

"M6_UL"

M6 for UL

"M7_DL"

M7 for DL

"M7_UL"

M7 for UL

"M8"

M8

"M9"

M9

"M1"

M1

"M2"

M2

"M3"

M3

"M4_DL"

M4 for DL

"M4_UL"

M4 for UL

"M5_DL"

M5 for DL

"M5_UL"

M5 for UL

"M6_DL"

M6 for DL

"M6_UL"

M6 for UL

"M7_DL"

M7 for DL

"M7_UL"

M7 for UL

"M8"

M8

"M9"

M9

"BAROMETRIC_PRESSURE"

Barometric pressure

"UE_SPEED"

UE speed

"UE_ORIENTATION"

UE orientation

"PERIODICAL"

Periodical

"EVENT_A2"

Event A2 for LTE and NR

"EVENT_A2_PERIODIC"

A2 event triggered periodic for LTE and NR

"ALL_RRM_EVENT_TRIGGERS"

All configured RRM event triggers for LTE

"120"

120 ms

"240"

240 ms

"480"

480 ms

"640"

640 ms

"1024"

1024 ms

"2048"

2048 ms

"5120"

5120 ms

"10240"

10240ms

"60000"

1 min=60000 ms

"360000"

6 min=360000 ms

"720000"

12 min=720000 ms

"1800000"

30 min=1800000 ms

"3600000"

60 min=3600000 ms

"1"

1

"2"

2

"4"

4

"8"

8

"16"

16

"32"

32

"64"

64

"infinity"

Infinity

"OUT_OF_COVERAGE"

Out of coverage

"A2_EVENT"

A2 event

"128"

1280 ms

"256"

2560 ms

"512"

5120 ms

"1024"

10240 ms

"2048"

20480 ms

"3072"

30720 ms

"4096"

40960 ms

"6144"

61440 ms

"600"

600 sec

"1200"

1200 sec

"2400"

2400 sec

"3600"

3600 sec

"5400"

5400 sec

"7200"

7200 sec

"GNSS"

GNSS

"E_CELL_ID"

E-Cell ID

"1024"

1024 ms

"1280"

1280 ms

"2048"

2048 ms

"2560"

2560 ms

"5120"

5120 ms

"10240"

10240 ms

"60000"

1 min

"1024"

1024 ms

"1280"

1280 ms

"2048"

2048 ms

"2560"

2560 ms

"5120"

5120 ms

"10240"

10240 ms

"60000"

1 min

"120"

120 ms

"240"

240 ms

"480"

480 ms

"640"

640 ms

"1024"

1024 ms

"2048"

2048 ms

"5120"

5120 ms

"10240"

10240ms

"20480"

20480ms

"40960"

40960ms

"60000"

1 min=60000 ms

"360000"

6 min=360000 ms

"720000"

12 min=720000 ms

"1800000"

30 min=1800000 ms

"3600000"

60 min=3600000 ms

"1280"

1280 ms

"2560"

2560 ms

"5120"

5120 ms

"10240"

10240 ms

"20480"

20480 ms

"30720"

30720 ms

"40960"

40960 ms

"61440"

61440 ms

"320"

320 ms

"640"

640 ms

"infinity"

Infinity

"1024"

1024 ms

"2048"

2048 ms

"5120"

5120 ms

"10240"

10240 ms

"60000"

1 min

"600"

600 sec

"1200"

1200 sec

"2400"

2400 sec

"3600"

3600 sec

"5400"

5400 sec

"7200"

7200 sec

traceRef

string

M

1

Trace Reference (see 3GPP TS 32.422 [19]).

It shall be encoded as the concatenation of MCC, MNC and Trace ID as follows:

<MCC><MNC>-<Trace ID>

The Trace ID shall be encoded as a 3 octet string in hexadecimal representation. Each character in the Trace ID string shall take a value of "0" to "9", "a" to "f" or "A" to "F" and shall represent 4 bits. The most significant character representing the 4 most significant bits of the Trace ID shall appear first in the string, and the character representing the 4 least significant bit of the Trace ID shall appear last in the string.

Pattern: ‘^[0-9]{3}[0-9]{2,3}-[A-Fa-f0-9]{6}$’

traceDepth

TraceDepth

M

1

Trace Depth (see 3GPP TS 32.422 [19]).

neTypeList

string

M

1

List of NE Types (see 3GPP TS 32.422 [19]).

It shall be encoded as an octet string in hexadecimal representation. Each character in the string shall take a value of "0" to "9", "a" to "f" or "A" to "F" and shall represent 4 bits. The most significant character representing the 4 most significant bits shall appear first in the string, and the character representing the 4 least significant bit shall appear last in the string.

Octets shall be coded according to 3GPP TS 32.422 [19].

Pattern: ‘^[A-Fa-f0-9]+$’

eventList

string

M

1

Triggering events (see 3GPP TS 32.422 [19]).

It shall be encoded as an octet string in hexadecimal representation. Each character in the string shall take a value of "0" to "9", "a" to "f" or "A" to "F" and shall represent 4 bits. The most significant character representing the 4 most significant bits shall appear first in the string, and the character representing the 4 least significant bit shall appear last in the string.

Octets shall be coded according to 3GPP TS 32.422 [19].

Pattern: ‘^[A-Fa-f0-9]+$’

collectionEntityIpv4Addr

Ipv4Addr

C

0..1

IPv4 Address of the Trace Collection Entity (see 3GPP TS 32.422 [19].

At least one of the collectionEntityIpv4Addr or collectionEntityIpv6Addr attributes shall be present.

collectionEntityIpv6Addr

Ipv6Addr

C

0..1

IPv6 Address of the Trace Collection Entity (see 3GPP TS 32.422 [19].

At least one of the collectionEntityIpv4Addr or collectionEntityIpv6Addr attributes shall be present.

interfaceList

string

O

0..1

List of Interfaces (see 3GPP TS 32.422 [19]).

It shall be encoded as an octet string in hexadecimal representation. Each character in the string shall take a value of "0" to "9", "a" to "f" or "A" to "F" and shall represent 4 bits. The most significant character representing the 4 most significant bits shall appear first in the string, and the character representing the 4 least significant bit shall appear last in the string.

Octets shall be coded according to 3GPP TS 32.422 [19].

If this attribute is not present, all the interfaces applicable to the list of NE types indicated in the neTypeList attribute should be traced.

Pattern: ‘^[A-Fa-f0-9]+$’

jobType

JobType

M

1

This IE shall indicate the Job type for MDT, see 3GPP TS 32.422 [19].

reportType

ReportTypeMdt

C

0..1

This IE shall be present for logged MDT.

When present, this IE shall indicate the report type for logged MDT, see 3GPP TS 32.422 [19].

areaScope

AreaScope

O

0..1

When present, this IE shall contain the area in Cells or Tracking Areas where the MDT data collection shall take place, see 3GPP TS 32.422 [19].

measurementLteList

array(MeasurementLteForMdt)

C

1..N

This IE shall be present if the Job type is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall contain a list of the measurements that shall be collected for LTE.

measurementNrList

array(MeasurementNrForMdt)

C

1..N

This IE shall be present if the Job type is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall contain a list of the measurements that shall be collected for NR.

sensorMeasurementList

array(SensorMeasurement)

O

1..N

When present, this IE shall include a list o the sensor measurements to be collected for UE if they are available.

reportingTriggerList

array(ReportingTrigger)

C

1..N

This IE shall be present if MeasurementList is configured for UE side measurements (such as M1 measurement in LTE) and the jobType is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall contain a list of the reporting triggers.

For LTE and NR, this IE shall not have the combination of periodical, event based and event based periodic reporting at the same time.

reportInterval

ReportIntervalMdt

C

0..1

This IE shall be present if the reportingTriggerList is configured for Periodic UE side measurements (such as M1 measurement in LTE) and the jobType is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall indicate the interval between the periodical measurements to be taken when UE is in connected in LTE.

reportIntervalNr

ReportIntervaLNrMdt

C

0..1

This IE shall be present if the reportingTriggerList is configured for Periodic UE side measurements (such as M1 measurement in NR) and the jobType is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall indicate the interval between the periodical measurements to be taken when UE is in connected in NR.

reportAmount

ReportAmountMdt

C

0..1

This IE shall be present if the reportingTriggerList is configured for Periodic UE side measurements (such as M1 measurement in LTE) and the jobType is configured for Immediate MDT or combined Immediate MDT and Trace.

When present, this IE shall indicate the number of measurement reports that shall be taken for periodical reporting while UE is in connected.

eventThresholdRsrp

integer

C

0..1

This IE shall be present if the report trigger parameter is configured for A2 event reporting or A2 event triggered periodic reporting and the job type parameter is configured for Immediate MDT or combined Immediate MDT and Trace in LTE.

When present, this IE shall indicate the Event Threshold for RSRP, and the value shall be between 0-97.

eventThresholdRsrpNr

integer

C

0..1

This IE shall be present if the report trigger parameter is configured for A2 event reporting or A2 event triggered periodic reporting and the job type parameter is configured for Immediate MDT or combined Immediate MDT and Trace in NR.

When present, this IE shall indicate the Event Threshold for RSRP, and the value shall be between 0-127.

eventThresholdRsrq

integer

C

0..1

This IE shall be present if the report trigger parameter is configured for A2 event reporting or A2 event triggered periodic reporting and the job type parameter is configured for Immediate MDT or combined Immediate MDT and Trace in LTE.

When present, this IE shall indicate the Event Threshold for RSRQ, and the value shall be between 0-34.

eventThresholdRsrqNr

integer

C

0..1

This IE shall be present if the report trigger parameter is configured for A2 event reporting or A2 event triggered periodic reporting and the job type parameter is configured for Immediate MDT or combined Immediate MDT and Trace in NR.

When present, this IE shall indicate the Event Threshold for RSRQ, and the value shall be between 0-127.

eventList

array(EventForMdt)

C

1..N

This IE shall be present for event triggered measurement in the case of logged MDT.

When present, this IE shall contain a list of events triggered measurement in NR.

loggingInterval

LoggingIntervalMdt

C

0..1

This IE shall be present if the job type is configured for Logged MDT or Logged MBSFN MDT in LTE.

When present, this IE shall contain the periodicity for logging MDT measurement results for periodic downlink pilot strength measurement in LTE when UE is in Idle.

loggingIntervalNr

LoggingIntervalNrMdt

C

0..1

This IE shall be present if the job type is configured for Logged MDT or Logged MBSFN MDT in NR.

When present, this IE shall contain the periodicity for logging MDT measurement results for periodic downlink pilot strength measurement in NR when UE is in Idle.

loggingDuration

LoggingDurationMdt

O

0..1

This IE shall be present if the job type parameter is configured for Logged MDT or Logged MBSFN MDT.

When present, this IE shall indicate the validity time of MDT logged configuration for IDLE in LTE

loggingDurationNr

LoggingDurationNrMdt

O

0..1

This IE shall be present if the job type parameter is configured for Logged MDT or Logged MBSFN MDT.

When present, this IE shall indicate the validity time of MDT logged configuration for IDLE in NR.

positioningMethod

PositioningMethodMdt

O

0..1

This IE may be present if the job type is set to Immediate MDT or Immediate MDT and Trace.

When present, it shall indicate the positioning method that shall be used for the MDT job.

For LTE the value "GNSS" may be selected only if the M1 measurement is selected in measurementList.

addPositioningMethodList

array(PositioningMethodMdt)

O

1..N

This IE may be present if positioningMethod is present.

When present, it shall indicate a list of the additional positioning methods that shall be used for the MDT job.

For LTE, the value "GNSS" may be selected only if the M1 measurement is selected in measurementList.

collectionPeriodRmmLte

CollectionPeriodRmmLteMdt

C

0..1

This IE shall be present if the job type is set to Immediate MDT or Immediate MDT and Trace and any of the "M2" or "M3" is contained in measurementList attribute in LTE.

When present, it shall contain the collection period that should be used to collect available measurement samples in case of RRM configured measurements. The same collection period should be used for all such measurements that are requested in the same MDT or combined Trace and MDT job.

collectionPeriodRmmNr

CollectionPeriodRmmNrMdt

C

0..1

This IE shall be present if the job type is set to Immediate MDT or Immediate MDT and Trace and any of the "M4" or "M5" is contained in measurementList attribute in NR.

When present, it shall contain the collection period that should be used to collect available measurement samples in case of RRM configured measurements. The same collection period should be used for all such measurements that are requested in the same MDT or combined Trace and MDT job.

measurementPeriodLte

MeasurementPeriodLteMdt

C

0..1

This IE shall be present if the job type is set to Immediate MDT or Immediate MDT and Trace and either the value "M4_DL" or "M4_UL" or "M5_DL" or "M5_UL" is contained in measurementList attribute in LTE.

When present, it shall contain the collection period that should be used for the Data Volume and Scheduled IP Throughput measurements made by the eNB. The same measurement period should be used for the UL and DL.

mdtAllowedPlmnIdList

array(PlmnId)

O

1..N

When present, this IE shall contain the PLMNs where measurement collection, status indication and log reporting is allowed. E.g. the UE performs these actions for Logged MDT when the RPLMN is part of this set of PLMNs.

Maximum of 16 PLMNs can be contained.

mbsfnAreaList

array(MbsfnArea)

O

1..N

When present, this IE shall contain MBSFN Area(s) for MBSFN measurement logging.

Maximum of 8 MBSFN area(s) can be contained.

This parameter is applicable only if the job type is Logged MBSFN MDT and for eUTRAN only.

interFreqTargetList

array(InterFreqTargetInfo)

O

1..8

When present, this IE shall indicate Inter Frequency Target(s) for which the UE is requested to perform measurement logging.

eutraCellIdList

array(EutraCellId)

O

1..N

When present, this IE shall contain a list of the E-UTRAN Cell Identifications where the MDT data collection shall take place.

nrCellIdList

array(NrCellId)

O

1..N

When present, this IE shall contain a list of the NR Cell Identities where the MDT data collection shall take place.

tacList

array(Tac)

O

1..N

When present, this IE shall contain a list of the tracking area codes where the MDT data collection shall take place.

tacInfoPerPlmn

map(TacInfo)

O

1..N

A map (list of key-value pairs where PlmnId converted to string serves as key; see clause 5.4.4.3) of TacInfo

tacList

array(Tac)

M

1..N

This IE shall contain a list of the tracking area codes.

mbsfnAreaId

integer

O

0..1

This IE shall contain the MBSFN Area ID.

The range of the value is from 0 to 255, see 3GPP TS 36.331 [39].

carrierFrequency

integer

O

0..1

When present, this IE shall contain the Carrier Frequency (EARFCN).

The range of the value is from 0 to 262143, see 3GPP TS 36.331 [39].

NOTE If both mbsfnAreaId and carrierFrequency values are present, a specific MBSFN area is indicated. If carrierFrequency is present, but mbsfnAreaId is absent, all MBSFN areas on that carrier frequency are indicated. If both mbsfnAreaId and carrierFrequency are absent, any MBSFN area is indicated.

dlCarrierFreq

ArfcnValueNr

M

1

This IE shall indicate the value of frequency for download for measurement logging.

cellIdList

array(PhysCellId)

O

1..32

When present, this IE shall contain a list of the physical cell identities where the UE is requested to perform measurement logging for the indicated frequency.

If absent, the UE shall perform measurement logging on all physical cells.