SubscriptionData

6.1.6.2.2

Data within an AMF Status Change Subscription request and response.

AmfStatusChangeNotification

6.1.6.2.3

Data within an AMF Status Change Notification request.

AmfStatusInfo

6.1.6.2.4

AMF Status Information

AssignEbiData

6.1.6.2.5

Data within an EBI assignment request.

AssignedEbiData

6.1.6.2.6

Data within a successful response to an EBI assignment request.

AssignEbiFailed

6.1.6.2.7

Represents failed assignment of EBI(s)

UEContextRelease

6.1.6.2.8

Data within a Release UE Context request.

N2InformationTransferReqData

6.1.6.2.9

Data within a N2 Information Transfer request containing the N2 information requested to be transferred to 5G AN.

NonUeN2InfoSubscriptionCreateData

6.1.6.2.10

Data within a create subscription requestfor non-UE specific N2 information notification.

NonUeN2InfoSubscriptionCreatedData

6.1.6.2.11

Data for the created subscription for non-UE specific N2 information notification.

UeN1N2InfoSubscriptionCreateData

6.1.6.2.12

Data within a create subscription request for UE specific N1 and/or N2 information notification.

UeN1N2InfoSubscriptionCreatedData

6.1.6.2.13

Data for the created subscription for UE specific N1 and/or N2 information notification.

N2InformationNotification

6.1.6.2.14

Data within a N2 information notification request.

N2InfoContainer

6.1.6.2.15

N2 information container.

N1MessageNotification

6.1.6.2.16

Data within a N1 message notification request.

N1MessageContainer

6.1.6.2.17

N1 Message Container.

N1N2MessageTransferReqData

6.1.6.2.18

Data within a N1/N2 message transfer request.

N1N2MessageTransferRspData

6.1.6.2.19

Data within a N1/N2 message transfer response.

RegistrationContextContainer

6.1.6.2.20

Registration Context Container used to send the UE context information, N1 message from UE, AN address etc during Registration with AMF re-allocation procedure.

AreaOfValidity

6.1.6.2.21

Area of validity information for N2 information transfer

UeContextTransferReqData

6.1.6.2.23

Data within a UE Context Transfer Request to start transferring of an individual ueContext resource from old AMF to new AMF.

UeContextTransferRspData

6.1.6.2.24

Data within a successful response to the UE Context Transfer request.

UeContext

6.1.6.2.25

Represents an individual ueContext resource

N2SmInformation

6.1.6.2.26

Represents the session management SMF related N2 information data part.

N2InfoContent

6.1.6.2.27

Represents a transparent N2 information content to be relayed by AMF.

NrppaInformation

6.1.6.2.28

Represents a NRPPa related N2 information data part.

PwsInformation

6.1.6.2.29

Represents a PWS related information data part.

N1N2MsgTxfrFailureNotification

6.1.6.2.30

Data within a N1/N2 Message Transfer Failure Notification request

N1N2MessageTransferError

6.1.6.2.31

Data within a N1/N2 Message Transfer Error response.

N1N2MsgTxfrErrDetail

6.1.6.2.32

N1/N2 Message Transfer Error Details

N2InformationTransferRspData

6.1.6.2.33

Data within a successful response to the N2 Information Transfer request to transfer N2 Information to the AN.

MmContext

6.1.6.2.34

Represents a Mobility Management Context in UE Context

SeafData

6.1.6.2.35

Represents SEAF data derived from data received from AUSF

NasSecurityMode

6.1.6.2.36

Indicates the NAS Security Mode

PduSessionContext

6.1.6.2.37

Represents a PDU Session Context in UE Context

NssaiMapping

6.1.6.2.38

Represents the mapping between a S-NSSAI in serving PLMN to a S-NSSAI in home PLMN.

UeRegStatusUpdateReqData

6.1.6.2.39

Data within a UE registration status update request to indicate a completion of transferring at a target AMF.

AssignEbiError

6.1.6.2.40

Data within a failure response to the EBI assignment request.

UeContextCreateData

6.1.6.2.41

Data within a request to create an individual ueContext resource

UeContextCreatedData

6.1.6.2.42

Data within a successful response for creating an individual ueContext resource

UeContextCreateError

6.1.6.2.43

Data within a failure response for creating a UE context

NgRanTargetId

6.1.6.2.44

Indicates a NG RAN as target of the handover

N2InformationTransferError

6.1.6.2.45

Data within a failure response for a non-UE related N2 Information Transfer.

PWSResponseData

6.1.6.2.46

Data related PWS included in a N2 Information Transfer response.

PWSErrorData

6.1.6.2.47

Data related to PWS error included in a N2 Information Transfer failure response.

NgKsi

6.1.6.2.49

Represents the ngKSI (see 3GPP TS 33.501 [27])

KeyAmf

6.1.6.2.50

Represents the K_amf or K’_amf. (see 3GPP TS 33.501 [27]).

ExpectedUeBehavior

6.1.6.2.51

Represents the expected UE behavior (e.g. UE moving trajectory) and its validity period.

UeRegStatusUpdateRspData

6.1.6.2.52

Data within a UE registration status update response to provides the status of UE context transfer status update at a source AMF.

N2RanInformation

6.1.6.2.53

Represents the RAN related N2 information data part.

N2InfoNotificationRspData

6.1.6.2.54

Data within a N2 information notification response.

SmallDataRateStatusInfo

6.1.6.2.55

Represents the small data rate status

SmfChangeInfo

6.1.6.2.56

SMF change information for PDU session(s)

V2xContext

6.1.6.2.57

Represents the V2X services related parameters

ImmediateMdtConf

6.1.6.2.58

Immediate MDT Configuration

V2xInformation

6.1.6.2.59

V2X related N2 information

EpsNasSecurityMode

6.1.6.2.60

Indicates the EPS NAS Security Mode

UeContextRelocateData

6.1.6.2.61

Data within a Relocate UE Context request

UeContextRelocatedData

6.1.6.2.62

Data within a Relocate UE Context

EcRestrictionDataWb

6.1.6.2.64

Enhanced Coverage Restriction Data for WB-N1 mode.

ExtAmfEventSubscription

6.1.6.2.65

AMF event subscription extended with additional information received for the subscription

AmfEventSubscriptionAddInfo

6.1.6.2.66

Additional information received for an AMF event subscription, e.g. binding indications.

UeContextCancelRelocateData

6.1.6.2.67

Data structure used for cancellation of UE Context Relocation.

UeDifferentiationInfo

6.1.6.2.68

Represents the UE Differentiation Information and its validity time.

CeModeBInd

6.1.6.2.69

CE-mode-B Support Indicator

LteMInd

6.1.6.2.70

LTE-M Indication

NpnAccessInfo

6.1.6.2.71

NPN Access Information

ProseContext

6.1.6.2.72

Represents the ProSE services related parameters

AnalyticsSubscription

6.1.6.2.73

Analytics subscriptions created in the NWDAF.

NwdafSubscription

6.1.6.2.74

Individual NWDAF subscription identified by the subscription Id.

UpdpSubscriptionData

6.1.6.2.75

UE policy delivery related N1 message notification subscription data

ProSeInformation

6.1.6.2.76

5G ProSe related N2 information.

ReleaseSessionInfo

6.1.6.2.77

PDU session Id(s) and the cause for triggering the release

AreaOfInterestEventState

6.1.6.2.78

Area Of Interest Event State in old AMF

EpsBearerId

6.1.6.3.2

EPS Bearer Identifier

Ppi

6.1.6.3.2

Paging Policy Indicator

NasCount

6.1.6.3.2

Represents a NAS COUNT

5GMmCapability

6.1.6.3.2

Represents a 5GMM capability

UeSecurityCapability

6.1.6.3.2

Represents a UE Security Capability

S1UeNetworkCapability

6.1.6.3.2

Represents a S1 UE Network Capability

DrxParameter

6.1.6.3.2

Indicates the UE DRX Parameters

OmcIdentifier

6.1.6.3.2

Represents the OMC Identifier

MSClassmark2

6.1.6.3.2

Indicates the MS Classmark 2 of a 5G SRVCC UE

SupportedCodec

6.1.6.3.2

Indicates the supported codec of a 5G SRVCC UE

StatusChange

6.1.6.3.3

Enumeration for AMF status

N2InformationClass

6.1.6.3.4

Enumeration for N2 Information Class

N1MessageClass

6.1.6.3.5

Enumeration for N1 Message Class

N1N2MessageTransferCause

6.1.6.3.6

Enumeration for N1N2Message Transfer Cause

UeContextTransferStatus

6.1.6.3.7

Describes the status of an individual ueContext resource in UE Context Transfer procedures

N2InformationTransferResult

6.1.6.3.8

Describes the result of N2 information transfer by AMF to the AN.

CipheringAlgorithm

6.1.6.3.9

Indicates the supported Ciphering Algorithm

IntegrityAlgorithm

6.1.6.3.10

Indicates the supported Integrity Algorithm

SmsSupport

6.1.6.3.11

Indicates the supported SMS delivery of a UE.

ScType

6.1.6.3.12

Indicates the security context type.

KeyAmfType

6.1.6.3.13

Indicates the K_amf type.

TransferReason

6.1.6.3.14

Indicates UE Context Transfer Reason

PolicyReqTrigger

6.1.6.3.15

Policy Request Triggers

RatSelector

6.1.6.3.16

Indicates the RAT type for the transfer of N2 information

NgapIeType

6.1.6.3.17

Indicates the supported NGAP IE types

N2InfoNotifyReason

6.1.6.3.18

N2 Information Notify Reason

SmfChangeIndication

6.1.6.3.19

Indicates the I-SMF or V-SMF change or removal

SbiBindingLevel

6.1.6.3.20

SBI Binding Level

EpsNasCipheringAlgorithm

6.1.6.3.21

Indicates the supported EPS NAS Ciphering Algorithm

EpsNasIntegrityAlgorithm

6.1.6.3.22

Indicates the supported EPS NAS Integrity Algorithm

PeriodicCommunicationIndicator

6.1.6.3.23

Indicates the Periodic Communication Indicator

UuaaMmStatus

6.1.6.3.24

Indicates UUAA-MM status

ReleaseCause

6.1.6.3.25

The cause for triggering the release

Snssai

3GPP TS 29.571 [6]

Arp

3GPP TS 29.571 [6]

PduSesisonId

3GPP TS 29.571 [6]

Guami

3GPP TS 29.571 [6]

Globally Unique AMF Identifier

AmfName

3GPP TS 29.571 [6]

The name of the AMF

Supi

3GPP TS 29.571 [6]

Subscription Permanent Identifier

Cause

3GPP TS 29.571 [6]

5G-AN Cause

ProblemDetails

3GPP TS 29.571 [6]

Detailed problems in failure case

supportedFeatures

3GPP TS 29.571 [6]

Supported Features

TimeZone

3GPP TS 29.571 [6]

UserLocation

3GPP TS 29.571 [6]

AccessType

3GPP TS 29.571 [6]

AllowedNssai

3GPP TS 29.531 [18]

NfInstanceId

3GPP TS 29.571 [6]

Uri

3GPP TS 29.571 [6]

Ecgi

3GPP TS 29.571 [6]

EUTRA Cell Identifier

Ncgi

3GPP TS 29.571 [6]

NR Cell Identifier

Uint16

3GPP TS 29.571 [6]

5Qi

3GPP TS 29.571 [6]

5G QoS Identifier

CorrelationID

3GPP TS 29.572 [25]

LCS Correlation ID

Pei

3GPP TS 29.571 [6]

Dnn

3GPP TS 29.571 [6]

Gpsi

3GPP TS 29.571 [6]

GroupId

3GPP TS 29.571 [6]

PlmnId

3GPP TS 29.571 [6]

RfspIndex

3GPP TS 29.571 [6]

EbiArpMapping

3GPP TS 29.502 [16]

EBI – ARP mapping

NsiId

3GPP TS 29.531 [18]

TraceData

3GPP TS 29.571 [6]

Trace control and configuration parameters

ConfiguredSnssai

3GPP TS 29.531 [18]

NgApCause

3GPP TS 29.571 [6]

Represents the NG AP cause IE

Area

3GPP TS 29.571 [6]

ServiceAreaRestriction

3GPP TS 29.571 [6]

CoreNetworkType

3GPP TS 29.571 [6]

Ambr

3GPP TS 29.571 [6]

SliceMbr

3GPP TS 29.571 [6]

GlobalRanNodeId

3GPP TS 29.571 [6]

NfGroupId

3GPP TS 29.571 [6]

Network Function Group Id

DurationSec

3GPP TS 29.571 [6]

StnSr

3GPP TS 29.571 [6]

Session Transfer Number for SRVCC

CMsisdn

3GPP TS 29.571 [6]

Correlation MSISDN

DateTime

3GPP TS 29.571 [6]

SmallDataRateStatus

3GPP TS 29.571 [6]

NfSetId

3GPP TS 29.571 [13]

NF Set ID

NfServiceSetId

3GPP TS 29.571 [13]

NF Service Set ID

LMFIdentification

3GPP TS 29.572 [25]

LMF Identification

PlmnAssiUeRadioCapId

3GPP TS 29.571 [6]

ManAssiUeRadioCapId

3GPP TS 29.571 [6]

NrV2xAuth

3GPP TS 29.571 [6]

NR V2X services authorized

LteV2xAuth

3GPP TS 29.571 [6]

LTE V2X services authorized

BitRate

3GPP TS 29.571 [6]

Bit Rate

Pc5QoSPara

3GPP TS 29.571 [6]

PC5 QoS parameters

PduSessionInfo

3GPP TS 29.571 [6]

The Slice and DNN combination of a PDU session.

PcfUeCallbackInfo

3GPP TS 29.571 [6]

The callback information of the PCF for the UE to allow the PCF for the PDU session to send SM Policy Association Establishment and Termination events notification.

CnAssistedRanPara

3GPP TS 29.502 [16]

SMF derived CN assisted RAN Parameters Tuning

MoExpDataCounter

3GPP TS 29.571 [6]

MO Exception Data Counter

CagData

3GPP TS 29.503 [35]

Closed Access Group Data

NssaaStatus

3GPP TS 29.571 [6]

Subscribed S-NSSAI subject to NSSAA procedure and the status

JobType

3GPP TS 29.571 [6]

Job Type in the trace

MeasurementLteForMdt

3GPP TS 29.571 [6]

Measurements used for MDT in LTE in the trace

MeasurementNrForMdt

3GPP TS 29.571 [6]

Measurements used for MDT in NR in the trace

ReportingTrigger

3GPP TS 29.571 [6]

Reporting Triggers for MDT in the trace

ReportIntervalMdt

3GPP TS 29.571 [6]

Report Interval for MDT in LTE in the trace

ReportAmountMdt

3GPP TS 29.571 [6]

Report Amount for MDT in the trace

CollectionPeriodRmmLteMdt

3GPP TS 29.571 [6]

Collection period for RRM measurements LTE for MDT in the trace

MeasurementPeriodLteMdt

3GPP TS 29.571 [6]

Measurement period LTE for MDT in the trace in

AreaScope

3GPP TS 29.571 [6]

Area Scope

PositioningMethodMdt

3GPP TS 29.571 [6]

Positioning Method for MDT in the trace in LTE

ReportIntervalNrMdt

3GPP TS 29.571 [6]

Report Interval for MDT in NR in the trace

CollectionPeriodRmmNrMdt

3GPP TS 29.571 [6]

Collection period for RRM measurements NR for MDT in the trace

SensorMeasurement

3GPP TS 29.571 [6]

Sensor information for MDT in the trace

ScheduledCommunicationTime

3GPP TS 29.571 [6]

Scheduled Communication Time

StationaryIndication

3GPP TS 29.571 [6]

Stationary Indication

TrafficProfile

3GPP TS 29.571 [6]

Traffic Profile

BatteryIndication

3GPP TS 29.571 [6]

Battery Indication

NFType

3GPP TS 29.510 [29]

NF type

UeAuth

3GPP TS 29.571 [6]

UE authorisation for PC5 service

PartitioningCriteria

3GPP TS 29.571 [6]

Partitioning Criteria

RedirectResponse

3GPP TS 29.571 [6]

Response body of the redirect response message.

CagId

3GPP TS 29.571 [6]

CAG ID

NnwdafEventsSubscription

3GPP TS 29.520 [52]

Represents an Individual NWDAF Event Subscription resource

PresenceInfo

3GPP TS 29.571 [6]

UePositioningCapabilities

3GPP TS 29.572 [25]

Indicates the positioning capabilities supported by the UE.

SmfSelectionData

3GPP TS 29.507 [32]

EpsInterworkingInfo

3GPP TS 29.503 [35]

IpAddress

3GPP TS 29.503 [35]

Fqdn

3GPP TS 29.571 [6]

PresenceState

3GPP TS 29.571 [6]

Presence State

amfStatusUri

Uri

M

1

This IE shall include the callback URI to receive notification of AMF status change.

guamiList

array(Guami)

C

1..N

This IE shall be absent for subscribing to status change for any GUAMI supported by the AMF, it shall be present for subscribing to specific GUAMIs supported by the AMF.

amfStatusInfoList

array(AmfStatusInfo)

M

1..N

This IE shall contain the status change information about the AMF

guamiList

array(Guami)

M

1..N

This IE shall contain the GUAMIs

statusChange

StatusChange

M

1

This IE shall contain the Status change of the related GUAMIs

targetAmfRemoval

AmfName

C

0..1

This IE shall contain the AMF Name of the target AMF in the AMF planned removal without UDSF scenario

targetAmfFailure

AmfName

C

0..1

This IE shall contain the AMF Name of the target AMF in the AMF Auto-recovery without UDSF scenario.

pduSessionId

PduSessionId

M

1

Represents the identifier of the PDU Session requesting EBI(s) to be assigned.

arpList

array(Arp)

C

1..N

This IE shall be present if the NF Service Consumer (e.g SMF) requests the AMF to assign EBI(s) for the PDU session. When present, this IE shall contain the list of ARP(s)of the QoS flow(s) for which EBI(s) are requested.

releasedEbiList

array(EpsBearerId)

C

1..N

This IE shall be present if the NF Service Consumer (e.g. SMF) needs to release the assigned EBI(s) from QoS flows (e.g. when the QoS flow is released).

oldGuami

Guami

C

0..1

This IE shall be present during an AMF planned removal procedure when the NF Service Consumer initiates a request towards the target AMF, for a UE associated to an AMF that is unavailable (see clause 5.21.2.2 of 3GPP TS 23.501 [2]).

modifiedEbiList

array(EbiArpMapping)

C

1..N

This IE shall be present if a PDU session modification procedure resulted in the change of ARP for a QoS flow to which an EBI is already allocated.

EAEA

pduSessionId

PduSessionId

M

1

Represents the identifier of the PDU Session requesting EBI(s) to be assigned.

assignedEbiList

array(EbiArpMapping)

M

0..N

This IE shall be present if the AMF assigned the requested EBI(s). This IE shall contain the successfully assigned EBIs. (NOTE)

failedArpList

array(Arp)

C

1..N

This IE shall be present if the AMF fails to allocate EBIs for a set of ARP(s). (NOTE)

releasedEbiList

array(EpsBearerId)

C

1..N

This IE shall be present if the NF Service Consumer requested the release of EBI(s) or if the AMF revoked an already assigned EBI towards the same PDU session. This IE shall contain the list of EBI(s) released at the AMF.

modifiedEbiList

array(EpsBearerId)

C

1..N

This IE shall be present if the NF Service Consumer requested to update the ARP for a QoS flow to which an EBI is already allocated. This IE shall contain the list of EBI(s) whose ARP has been updated at the AMF.

EAEA

NOTE: The same ARP value may be returned in the assignedEbiList and in the failedArpList, if the request included the same ARP value more than once in the arpList and the AMF is not able to allocate an EBI for every occurrence of this ARP value.

pduSessionId

PduSessionId

M

1

Represents the identifier of the PDU Session requesting EBI(s) to be assigned.

failedArpList

array(Arp)

C

1..N

This IE shall be present if the AMF fails to allocate EBIs for a set of ARPs.

supi

Supi

C

0..1

This IE shall be present if the UE is emergency registered and the SUPI is not authenticated.

unauthenticatedSupi

boolean

C

0..1

When present, this IE shall be set as follows:

– true: unauthenticated SUPI;

– false (default): authenticated SUPI.

This IE shall be present if the SUPI is present in the message but is not authenticated and is for an emergency registered UE.

ngapCause

NgApCause

M

1

This IE shall contain the cause value received from the source 5G-AN in the handover Cancel message received over the NGAP interface.

taiList

array(Tai)

C

1..N

This IE shall be included if the N2 information needs to be sent to the 5G-AN nodes that serve the list of tracking areas provided.

ratSelector

RatSelector

C

0..1

This IE shall be included to indicate if the N2 information shall be transferred to ng-eNBs or gNBs exclusively.

globalRanNodeList

array(GlobalRanNodeId)

C

1..N

This IE shall be included if the N2 information needs to be sent to the list of RAN nodes provided.

n2Information

N2InfoContainer

M

1

This IE includes the information to be sent on the N2 interface to the identified 5G-AN nodes and additional information required for the processing of the message by the AMF.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

globalRanNodeList

array(GlobalRanNodeId))

C

1..N

This IE shall be included if the subscription is for N2 information from RAN node(s) for which the N2 information notification is subscribed (i.e N3IWF identifier or gNB identifier or Ng-eNB identifier).

(NOTE)

anTypeList

array(AccessType)

C

1..N

This IE shall be included, if the globalRanNodeId IE is not included and if the N2 information from a specific access network needs to be subscribed. When included this IE shall contain the access type of the access network from which Non UE specific N2 information is to be notified.

(NOTE)

n2InformationClass

N2InformationClass

M

1

This IE represents the class of N2 information that the NF Service Consumer requires to be notified.

n2NotifyCallbackUri

Uri

M

1

This IE represents the callback URI on which the N2 information shall be notified.

nfId

NfInstanceId

C

0..1

This IE shall be present if the subscription is for "NRPPa" N2 information class and/or "LPP" N1 information class. When present, this IE shall carry the value to be used for NGAP "Routing ID" IE, which identifies the Network Function (e.g. LMF) instance handling the NRPPa and/or LPP data.

This IE may also be present if the subscription is for "PWS" N2 information class. When present, this IE shall carry the instance identity of the network function (e.g. CBCF or PWS-IWF) creating the subscription.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

NOTE: Absence of both IEs means the subscription is for N2 information from all connected Access Network node(s) via any access type.

n2NotifySubscriptionId

string

M

1

Represents the Id created by the AMF for the subscription to notify a non-UE related N2 information.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

n2InformationClass

N2InformationClass

O

0..1

This IE represents the class of N2 information that the NF Service Consumer subscribed to.

n2InformationClass

N2InformationClass

C

0..1

This IE shall be present if the NF service consumer subscribes for a N2 information notification. This IE represents the class of N2 information that the NF Service Consumer requires to be notified.

n2NotifyCallbackUri

Uri

C

0..1

This IE shall be present if the NF service consumer subscribes for a N2 information notification. This IE represents the callback URI on which the N2 information shall be notified.

n1MessageClass

N1MessageClass

C

0..1

This IE shall be present if the NF service consumer subscribes for a N1 message notification.

This IE represents the class of N1 message that the NF Service Consumer requires to be notified.

n1NotifyCallbackUri

Uri

C

0..1

This IE shall be present if the NF service consumer subscribes for a N1 message notification. This IE represents the callback URI on which the N1 message shall be notified.

nfId

NfInstanceId

C

0..1

This IE shall be present if the subscription is for "NRPPa" N2 information class and/or "LPP" N1 information class. When present, this IE shall carry the value to be used for NGAP "Routing ID" IE, which identifies the Network Function (e.g. LMF) instance handling the NRPPa and/or LPP data.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

oldGuami

Guami

C

0..1

This IE shall be present during an AMF planned removal procedure when the NF Service Consumer initiates a request towards the target AMF, for a UE associated to an AMF that is unavailable (see clause 5.21.2.2 of 3GPP TS 23.501 [2]).

n1n2NotifySubscriptionId

string

M

1

Represents the Id created by the AMF for the subscription to notify a UE related N1/N2 information.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

n2NotifySubscriptionId

string

M

1

Represents the subscription Id for which the notification is generated. The NF Service Consumer uses this to co-relate the notification against a corresponding subscription. If the notification is due to an implicit subscription via NRF, then the value shall be set as "implicit".

During the AMF planned removal procedure with UDSF deployed procedure, this IE shall be set to "" (empty string) and be ignored by the NF Service Consumer.

n2InfoContainer

N2InfoContainer

C

0..1

This IE shall be present, except during Inter NG-RAN node N2 based handover procedure (see clause 5.2.2.3.6.2).

When present, this IE shall contain the N2 information related to the corresponding N2 information class.

toReleaseSessionList

array(PduSessionId)

C

1..N

This IE shall be present during N2 based handover procedure, if there are any PDU session(s) associated with Network Slice(s) which become no longer available.

When present, this IE shall include all the PDU session(s) associated with no longer available S-NSSAI(s).

lcsCorrelationId

CorrelationID

C

0..1

This IE shall be present, if an LCS correlation identifier is received in corresponding N1/N2 Message Transfer service operation.

When present, this IE shall carry the LCS correlation identifier.

notifyReason

N2InfoNotifyReason

C

0..1

This IE shall be present, if "n2InfoContainer" attribute is not present; this IE may be present otherwise.

When present, this IE indicates the reason for the N2 information notification.

smfChangeInfoList

array(SmfChangeInfo)

C

1..N

This IE shall be present during N2 based handover procedure, if there is I-SMF or V-SMF change or removal for the related PDU session(s).

When present, this IE shall indicate the I-SMF/V-SMF situation after successful HO complete.

DTSSA

ranNodeId

GlobalRanNodeId

C

0..1

This IE shall be present during the AMF planned removal procedure with UDSF deployed procedure.

When present, it shall contain the Global RAN Node ID. The IE shall contain either the gNB ID or the NG-eNB ID.

initialAmfName

AmfName

C

0..1

This IE shall be present during the AMF planned removal procedure with UDSF deployed procedure.

When present, it shall contain the AMF Name of the initial AMF.

anN2IPv4Addr

Ipv4Addr

C

0..1

This IE shall be present during the AMF planned removal procedure with UDSF deployed procedure, if the Access Network N2 interface is using IPv4 address.

anN2IPv6Addr

Ipv6Addr

C

0..1

This IE shall be present during the AMF planned removal procedure with UDSF deployed procedure, if the Access Network N2 interface is using IPv6 address.

guami

Guami

C

0..1

This IE shall be present during Location Services procedures (see clause 5.2.2.3.6.3) and it may be present otherwise.

When present, it shall contain the GUAMI serving the UE.

notifySourceNgRan

boolean

C

0..1

This IE shall be present during an Inter NG-RAN node N2 based DAPS handover procedure , if the target AMF receives this indication in the Handover Notify from the target NG-RAN node (see clause 4.9.1.3.3a of 3GPP TS 23.502 [3]).

When present, it shall be set as follows:

– true: Notify the Source NG-RAN about Handover Success

– false (default): Do not notify the Source NG-RAN about Handover Success

n2InformationClass

N2InformationClass

M

1

This IE represents the class of N2 information to be transferred.

smInfo

N2SmInformation

C

0..1

This IE shall be present if session management N2 information is to be transferred. When present, it represents a session management SMF related N2 information data part.

ranInfo

N2RanInformation

C

0..1

This IE shall be present if RAN related N2 information is to be transferred (i.e. n2InformationClass is "RAN"). When present, it shall contain the RAN related N2 information data part.

nrppaInfo

NrppaInformation

C

0..1

This IE shall be present if location service related N2 information is to be transferred. When present, it represents a NRPPa related N2 information data part.

pwsInfo

PwsInformation

C

0..1

This IE shall be present if PWS related N2 information is to be transferred.

v2xInfo

V2xInformation

C

0..1

This IE shall be present if V2X related N2 information is to be transferred.

proseInfo

ProSeInformation

C

0..1

This IE shall be present if 5G ProSe related N2 information is to be transferred.

ProSe

n1NotifySubscriptionId

string

C

0..1

Represents the subscription Id for which the notification is generated. The NF Service Consumer uses this to correlate the notification against a corresponding subscription. If the notification is due to an implicit subscription via NRF, then the value shall be set as "implicit".

This IE shall be present if the notification is based on a subscription to N1MessgeNotification. An exception is for the case when initial AMF forwards NAS message to target AMF during AMF re-allocation procedure.

n1MessageContainer

N1MessageContainer

M

1

Contains the N1 message class and N1 message content.

lcsCorrelationId

CorrelationID

O

0..1

If the N1 message notified is for LCS procedures, the NF Service Producer (e.g. AMF) may include an LCS correlation identifier.

registrationCtxtContainer

RegistrationContextContainer

C

0..1

If the N1 message notified is of type 5GMM (i.e. during Registration with AMF re-allocation procedure), the NF Service Producer (e.g. AMF) shall include this IE, if available.

newLmfIdentification

LMFIdentification

O

0..1

If a new LMF is selected by AMF, this IE may include the new selected LMF Identification.

guami

Guami

C

0..1

This IE shall be present during UE Assisted and UE Based Positioning Procedure (see clause 5.2.2.3.5.3) or the LCS Event Report, Event Reporting in RRC INACTIVE state procedures, LCS Cancel Location and LCS Periodic-Triggered Invoke Procedures (see clause 5.2.2.3.5.5) and it may be present otherwise.

When present, it shall contain the GUAMI serving the UE.

cIoT5GSOptimisation

boolean

C

0..1

This IE shall be present when the N1 message class is "LPP/LCS" and the N1 message is received from the UE with Control Plane CIoT 5GS Optimisation. When present, it shall be set as follows:

– true: Control Plane CIoT 5GS Optimisation was used and no signalling or data is currently pending for the UE at the AMF.

– false (default): Control Plane CIoT 5GS Optimisation was not used or signalling or data is currently pending for the UE at the AMF.

ecgi

Ecgi

O

0..1

When present, this IE shall indicate the identifier of the E-UTRAN cell serving the UE.

This IE may be present if the N1 message notified is for LCS procedures.

ncgi

Ncgi

O

0..1

When present, this IE shall indicate the identifier of the NR cell serving the UE.

This IE may be present if the N1 message notified is for LCS procedures.

n1MessageClass

N1MessageClass

M

1

This IE shall contain the N1 message class for the message content specified in n1MessageContent.

n1MessageContent

RefToBinaryData

M

1

This IE shall reference the N1 message binary data corresponding to the n1MessageClass. See 3GPP TS 24.501 [11]. See clause 6.1.6.4.2.

nfId

NfInstanceId

C

0..1

This IE shall be present when the n1MessageClass IE is set to "LPP" or "LCS". It should be present when the n1MessageClass IE is set to "SM". It may be present otherwise.

When present, this IE shall carry the identifier of the Network Function (e.g. LMF or SMF) instance sending the N1 message. (NOTE)

serviceInstanceId

string

O

0..1

When present, this IE shall carry the Service Instance Identifier of the Service Instance (e.g. LMF) sending the N1 message.

NOTE: For a Home-routed PDU session, this IE shall carry the NF instance ID of the V-SMF; for a PDU session with I-SMF, this IE shall carry the NF instance ID of the I-SMF.

n1MessageContainer

N1MessageContainer

C

0..1

This IE shall be included if a N1 message needs to be transferred.

n2InfoContainer

N2InfoContainer

C

0..1

This IE shall be included if a N2 information needs to be transferred.

mtData

RefToBinaryData

C

0..1

This IE shall be included if mobile terminated data (i.e. CIoT user data container) needs to be transferred. When present, it shall reference the mobile terminated data (see clause 6.1.6.4.4).

CIOT

skipInd

boolean

C

0..1

This IE shall be present and set to "true" if the service consumer (e.g. SMF) requires the N1 message to be sent to the UE only when UE is in CM-CONNECTED, e.g. during SMF initiated PDU session release procedure (see clause 4.3.4.2 of 3GPP TS 23.502 [3]).

When present, this IE shall be set as following:

– true: AMF should skip sending N1 message to UE, when the UE is in CM-IDLE.

– false (default): the AMF shall send the N1 message to the UE.

lastMsgIndication

boolean

O

0..1

This flag when present shall indicate that the message transferred is the last message. (See clause 4.13.3.3 and clause 4.13.3.6 of 3GPP TS 23.502 [3].

pduSessionId

PduSessionId

O

0..1

PDU Session ID for which the N1 / N2 message is sent, if the N1 / N2 message class is SM.

lcsCorrelationId

CorrelationID

O

0..1

LCS Correlation ID, for which the N1/N2 message is sent, if

– the N1 message class is LPP (see clause 6.11.1 of 3GPP TS 23.273 [42]) or LCS (see clause 6.3 of 3GPP TS 23.273 [42]); and/or

– the N2 Information class is NRPPa (see clause 6.11.2 of 3GPP TS 23.273 [42]).

ppi

Ppi

O

0..1

This IE when present shall indicate the Paging policy to be applied. The paging policies are configured at the AMF.

arp

Arp

O

0..1

This IE when present shall indicate the Allocation and Retention Priority of the PDU session for which the N1/N2 message transfer is initiated. To support priority paging, the AMF shall use this IE to determine whether to include the Paging Priority IE in the NGAP Paging Message (see clause 5.4.3.3 of 3GPP TS 23.501 [2]). The set of ARP values associated with priority paging and mapping to Paging Priority IE values are configured at the AMF.

This IE shall not be present when the N1/N2 message class is not SM.

5qi

5Qi

O

0..1

This IE when present shall indicate the 5QI associated with the PDU session for which the N1 / N2 message transfer is initiated. This IE shall not be present when the N1/N2 message class is not SM.

n1n2FailureTxfNotifURI

Uri

O

0..1

If included, this IE represents the callback URI on which the AMF shall notify the N1/N2 message transfer failure.

smfReallocationInd

boolean

O

0..1

This IE shall indicate that the SMF is requested to be reallocated (see clause 4.3.5.2 of 3GPP TS 23.502 [3]).

When present, this IE shall be set as follows:

– true: the SMF is requested to be reallocated.

– false (default): the SMF is not requested to be reallocated.

areaOfValidity

AreaOfValidity

O

0..1

This IE represents the list of TAs where the provided N2 information is valid. See clause 5.2.2.2.7 and 4.2.3.3 of 3GPP TS 23.502 [3].

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

oldGuami

Guami

C

0..1

This IE shall be present during an AMF planned removal procedure when the NF Service Consumer initiates a request towards the target AMF, for a UE associated to an AMF that is unavailable (see clause 5.21.2.2 of 3GPP TS 23.501 [2]).

maAcceptedInd

boolean

C

0..1

This IE shall be present if a request to establish a MA PDU session was accepted or if a single access PDU session was upgraded into a MA PDU session (see clauses 4.22.2 and 4.22.3 of 3GPP TS 23.502 [3]).

When present, it shall be set as follows:

– true: MA PDU session

– false (default): single access PDU session

MAPDU

extBufSupport

boolean

O

0..1

This IE may be present with value "true" if Extended Buffering is permitted, during Network triggered Service Request Procedure (see clause 4.2.3.3 of 3GPP TS 23.502 [3]), UPF anchored Mobile Terminated Data Transport in Control Plane CIoT 5GS Optimisation procedure (see clause 4.24.2 of 3GPP TS 23.502 [3]) or NEF Anchored Mobile Terminated Data Transport (see clause 4.25.5 of 3GPP TS 23.502 [3]).

When present, this IE shall indicate whether Extended Buffering applies or not:

– true: Extended Buffering applies

– false (default) Extended Buffering does not apply

targetAccess

AccessType

C

0..1

This IE shall be included by a SMF for a MA PDU session to indicate the target access type (i.e. 3GPP access or Non-3GPP access) towards which the N2 information and optionally N1 information is requested to be sent.

This IE may be included by an LMF to indicate the access type through which an LPP message shall be transmitted to the UE.

This IE shall be included by an SMF and set to the old access type during an intra-AMF handover between 3GPP and non-3GPP accesses, when releasing the N2 PDU session resources in the old access.

MAPDU

ELCS

3GA-N3GA-HO

nfId

NfInstanceId

C

0..1

This IE should be included by the SMF when invoking N1N2MessageTransfer service operation, if the n1MessageContainer IE is not present.

When present, this IE shall carry the identifier of the NF instance invoking the service operation, i.e. the SMF instance hosting the SM Context for the PDU session.

(NOTE 3)

NOTE 1: For N1 message class "UPDP", as per 3GPP TS 24.501 [11] Annex D, the messages between UE and PCF carry PTI which is used by the PCF to correlate the received N1 message in the notification with a prior transaction initiated by the PCF.

NOTE 2: During Downlink Data Notification procedure, if the SMF receives the PPI value (=DSCP(0..63)) from the UPF and wants to set the PPI value in the N1N2MessgeTransfer message, the SMF shall map the PPI value received from N4 message to correct PPI value (0..7) used in N11 message.

NOTE 3: If the n1MessageContainer IE is present, the nfId attribute in the n1MessageContainer IE should be used by the SMF and the AMF to identify the NF instance ID of the sending SMF.

cause

N1N2MessageTransferCause

M

1

This IE shall provide the result of the N1/N2 message transfer processing at the AMF.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

ueContext

UeContext

M

1

This IE shall contain the UE Context information.

localTimeZone

TimeZone

O

0..1

This IE contains the time zone UE is currently located.

anType

AccessType

M

1

This IE shall contain the current access type of the UE.

anN2ApId

integer

M

1

This IE shall contain the RAN UE NGAP ID over N2 interface.

ranNodeId

GlobalRanNodeId

M

1

This IE shall contain the Global RAN Node ID. The IE shall contain either the gNB ID or the NG-eNB ID.

initialAmfName

AmfName

M

1

This IE shall contain the AMF Name of the initial AMF.

userLocation

UserLocation

M

1

This IE shall contain the user location received from 5G-AN.

anN2IPv4Addr

Ipv4Addr

C

0..1

If the Access Network N2 interface is using IPv4 address, this IE shall be included.

anN2IPv6Addr

Ipv6Addr

C

0..1

If the Access Network N2 interface is using IPv6 address, this IE shall be included.

rrcEstCause

string

C

0..1

This IE shall contain the RRC Establishment Cause, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

It carries the value in hexadecimal representation

Pattern: ‘^[0-9a-fA-F]+$’

ueContextRequest

boolean

C

0..1

This IE shall contain the indication on whether UE context including security information needs to be setup at the NG-RAN, if received from the NG-RAN by the initial AMF (See 3GPP TS 38.413 [12], clause 9.2.5.1).

When present, it shall be set as follows:

– true: UE context including security information needs to be setup at the NG-RAN.

– false (default): UE context including security information does not need to be setup at the NG-RAN.

initialAmfN2ApId

integer

C

0..1

This IE shall contain the AMF UE NGAP ID of the initial AMF over N2 interface, if available.

allowedNssai

AllowedNssai

O

0..1

This IE contains the allowed NSSAI of the UE. This IE also contains the mapped home network S-NSSAI for each allowed S-NSSAI.

configuredNssai

array(ConfiguredSnssai)

O

1..N

This IE shall contain the configured S-NSSAI(s) authorized by the NSSF in the serving PLMN, if received from the NSSF.

rejectedNssaiInPlmn

array(Snssai)

O

1..N

This IE shall contain the rejected NSSAI in the PLMN, if received from the NSSF.

rejectedNssaiInTa

array(Snssai)

O

1..N

This IE shall contain the rejected NSSAI in the current TA, if received from the NSSF.

selectedPlmnId

PlmnId

O

0..1

This IE shall contain the selected PLMN Id for the non-3GPP access, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

iabNodeInd

boolean

O

0..1

This IE shall contain the IAB Node Indication, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

When present, it shall be set as follows:

– true: 5G-AN is an IAB Node.

– false (default): 5G-AN is not an IAB Node.

ceModeBInd

CeModeBInd

O

0..1

This IE shall contain the CE-mode-B Support Indicator, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

lteMInd

LteMInd

O

0..1

This IE shall contain the LTE-M Indication, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

authenticatedInd

boolean

O

0..1

This IE shall contain the Authenticated Indication, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

This IE shall be set as follows:

– true: authenticated by the 5G-AN;

– false (default): unauthenticated by the 5G-AN.

npnAccessInfo

NpnAccessInfo

O

0..1

This IE shall contain the NPN Access Information, if received from the 5G-AN (See 3GPP TS 38.413 [12], clause 9.2.5.1).

taiList

array(Tai)

M

0..N

An array of TAI representing the area of validity of the associated N2 information provided.

reason

TransferReason

M

1

Indicate the reason for the UEContextTransfer service request

accessType

AccessType

M

1

This IE shall contain the access type of the UE.

plmnId

PlmnIdNid

O

0..1

If present, this IE shall contain the PLMN ID or SNPN ID of the NF service consumer (e.g target AMF).

regRequest

N1MessageContainer

O

0..1

If present, this IE shall refer to the registration request message which triggers the UE Context Transfer. The message class shall be "5GMM" and message content shall be reference to N1 Message Content binary data, See clause 6.1.6.4.2.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

ueContext

UeContext

M

1

Represents an individual ueContext resource after the modification is applied.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

ueRadioCapability

N2InfoContent

C

0..1

This IE shall be included to contain the "UE Radio Capability Information" if available during context transfer procedure.

UE Radio Capability Information does not include NB-IoT UE radio capability, see clause 5.4.4.1 of 3GPP TS 23.501 [2]

ueRadioCapabilityForPaging

N2InfoContent

C

0..1

This IE shall be included to contain the "UE Radio Capability for Paging" if available during context transfer procedure.

ueNbiotRadioCapability

N2InfoContent

C

0..1

This IE shall be included to contain "NB-IoT UE radio capability Information" if available during context transfer procedure, see clause 5.4.4.1 of 3GPP TS 23.501 [2]

CIOT

supi

Supi

C

0..1

This IE shall be present if available. When present, this IE contains SUPI of the UE.

supiUnauthInd

boolean

C

0..1

This IE shall be present if SUPI is present. When present, it shall indicate whether the SUPI is unauthenticated.

gpsiList

array(Gpsi)

C

1..N

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE shall contain the GPSI(s) of the UE.

pei

Pei

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE shall contain Mobile Equipment Identity of the UE.

udmGroupId

NfGroupId

O

0..1

When present, it shall indicate the identity of the UDM Group serving the UE.

ausfGroupId

NfGroupId

O

0..1

When present, it shall indicate the identity of the AUSF Group serving the UE.

pcfGroupId

NfGroupId

O

0..1

When present, it shall indicate the identity of the PCF Group serving the UE.

routingIndicator

string

O

0..1

When present, it shall indicate the Routing Indicator of the UE.

hNwPubKeyId

integer

O

0..1

When present, it shall indicate the Home Network Public Key Identifier of the UE. (NOTE 4).

groupList

array(GroupId)

C

1..N

This IE shall be present if the UE belongs to any subscribed internal group(s) and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE shall list the subscribed internal group(s) to which the UE belongs to.

drxParameter

DrxParameter

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE shall contain the DRX parameter of the UE.

subRfsp

RfspIndex

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, it shall indicate the subscribed RFSP Index of the UE.

usedRfsp

RfspIndex

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, it shall indicate the used RFSP Index of the UE.

subUeAmbr

Ambr

C

0..1

This IE shall be present if subscribed UE-AMBR has been retrieved from UDM and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a.

When present, this IE shall indicate the value of subscribed UE AMBR of the UE.

subUeSliceMbrList

map(SliceMbr)

C

1..N

Map of SliceMbr, where the S-NSSAI shall be used as the key of the map.

This IE shall be present if the list of subscribed UE-Slice-MBR(s) has been retrieved from UDM and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a.

When present, this IE shall indicate the list of subscribed UE-Slice-MBR(s) per S-NSSAI for the UE.

smsfId

NfInstanceId

C

0..1

This IE shall be present if the SMS service for UE is activated and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, it indicates the identifier of the SMSF network function instance serving the UE. The NF service consumer (e.g. target AMF) may use this information to identify the SMSF NF service profile from among the SMSF NF service profiles it received from the NRF.

seafData

SeafData

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a or the case specified in clause 5.2.2.2.1.2. When present, this IE contains the security data derived from data received from AUSF of the UE.

5gMmCapability

5GMmCapability

C

0..1

This IE shall be present if the UE had provided this IE during Registration Procedure and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE shall contain 5G MM capability of the UE.

pcfId

NfInstanceId

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE indicates the identity of the PCF for AM Policy and/or UE Policy.

pcfSetId

NfSetId

C

0..1

This IE shall be present, if available. When present, it shall contain the NF Set ID of the PCF for AM Policy and/or UE Policy.

pcfAmpServiceSetId

NfServiceSetId

C

0..1

This shall be present, if available. When present, it shall contain the NF Service Set ID of the PCF’s AM Policy service.

pcfUepServiceSetId

NfServiceSetId

C

0..1

This shall be present, if available. When present, it shall contain the NF Service Set ID of the PCF’s UE Policy service.

pcfBindingLevel

SbiBindingLevel

C

0..1

This IE shall be present if available. When present, this IE shall contain the SBI binding level of the PCF’s AM policy and UE Policy association resources. (NOTE 6)

pcfAmPolicyUri

Uri

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present this IE shall contain the URI of the individual AM policy resource (see 3GPP TS 29.507 [32] clause 5.3.3.2) used by the AMF.

amPolicyReqTriggerList

array(PolicyReqTrigger)

C

1..N

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present this IE shall indicate the AM policy request triggers towards the PCF. The NF Service Consumer (e.g. target AMF) shall use these triggers to request AM policy from the PCF whenever these triggers are met.

The possible AM policy control request triggers are specified in clause 6.1.2.5 of 3GPP TS 23.503 [7].

pcfUePolicyUri

Uri

C

0..1

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present this IE shall contain the URI of the individual UE policy resource (see 3GPP TS 29.507 [32] clause 5.3.3.2) used by the AMF.

uePolicyReqTriggerList

array(PolicyReqTrigger)

C

1..N

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present this IE shall indicate the UE policy request triggers towards the PCF. The NF Service Consumer (e.g. target AMF) shall use these triggers to request UE policy from the PCF whenever these triggers are met.

The possible UE policy control request triggers are specified in clause 6.1.2.5 of 3GPP TS 23.503 [7].

hpcfId

NfInstanceId

O

0..1

This IE indicates the identity of PCF for UE Policy in home PLMN, when the UE is roaming.

hpcfSetId

NfSetId

O

0..1

When present, this IE shall contain the NF Set ID of the PCF for UE Policy in home PLMN, when the UE is roaming.

restrictedRatList

array(RatType)

O

1..N

When present, this IE shall indicate the list of RAT types that are restricted for the UE; see 3GPP TS 29.571 [6] (NOTE 1)

forbiddenAreaList

array(Area)

O

1..N

When present, this IE shall indicate the list of forbidden areas of the UE.

serviceAreaRestriction

ServiceAreaRestriction

O

0..1

When present, this IE shall indicate subscribed Service Area Restriction for the UE.

restrictedCnList

array(CoreNetworkType)

O

1..N

When present, this IE shall indicate the list of Core Network Types that are restricted for the UE.

eventSubscriptionList

array(ExtAmfEventSubscription)

C

1..N

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, it shall indicate the event subscription(s) targeting the UE or the group the UE is part of.

If the source AMF supports binding procedures and if it received binding indications for event notifications (i.e. with "callback" scope) or for subscription change event notifications (i.e. with "subscription-events" scope) for certain subscriptions, these binding indications should also be included.

If the source AMF knows the NF type of the NF that created the subscription, this information should also be indicated.

mmContextList

array(MmContext)

C

1..2

This IE shall be present if available and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE contains the MM Contexts of the UE.

sessionContextList

array(PduSessionContext)

C

1..N

This IE shall be present if available and if it is neither case a) nor case b) specified in clause 5.2.2.2.1.1 step 2a. When present, this IE contains the PDU Session Contexts of the UE.

(NOTE 2)

epsInterworkingInfo

EpsInterworkingInfo

C

0..1

This IE shall contain the associations between APN/DNN and PGW-C+SMF for EPS interworking, if available.

traceData

TraceData

C

0..1

This IE shall be present if signalling based trace has been activated (see 3GPP TS 32.422 [30]) and if it is not case b) specified in clause 5.2.2.2.1.1 step 2a.

serviceGapExpiryTime

DateTime

C

0..1

This IE shall be present if Service Gap Control is enabled and if the AMF has started a Service Gap Timer which has not expired yet (see clause 5.31.16 of 3GPP TS 23.501 [2]).

The value of the IE shall indicate the expiry time of the active Service Gap Timer for the UE.

stnSr

StnSr

O

0..1

This IE shall be present if available, for UE supporting 5G-SRVCC (see clause 5.2.2.2.11 of 3GPP TS 23.502 [3]).

When present, this IE contains STN-SR of the UE.

cMsisdn

CMsisdn

O

0..1

This IE shall be present if available, for UE supporting 5G-SRVCC (see clause 5.2.2.2.11 of 3GPP TS 23.502 [3]).

When present, this IE contains C-MSISDN of the UE.

msClassmark2

MSClassmark2

O

0..1

This IE shall be present if available, for UE supporting 5G-SRVCC (see clause 5.2.2.2.11 of 3GPP TS 23.502 [3]).

When present, this IE contains Mobile Station Classmark 2 of the UE.

supportedCodecList

array(SupportedCodec)

O

1..N

This IE shall be present if available, for UE supporting 5G-SRVCC (see clause 5.2.2.2.11 of 3GPP TS 23.502 [3]).

When present, this IE shall indicate the list of speech codecs supported by the UE.

smallDataRateStatusInfos

array(SmallDataRateStatusInfo)

O

1..N

List of Small Data Rate Control Statuses for released PDU Sessions, see clause 5.31.14.3 of TS 23.501 [2].

CIOT

restrictedPrimaryRatList

array(RatType)

O

1..N

When present, this IE shall indicate the list of RAT types that are restricted for use as primary RAT for the UE; see 3GPP TS 29.571 [6] (NOTE 1)

restrictedSecondaryRatList

array(RatType)

O

1..N

When present, this IE shall indicate the list of RAT types that are restricted for use as secondary RAT for the UE; see 3GPP TS 29.571 [6] (NOTE 1)

v2xContext

V2xContext

O

0..1

This IE shall be present if available (see clause 6.5.4 of 3GPP TS 23.287 [47]).

When present, this IE shall indicate the parameters related to the V2X services.

lteCatMInd

boolean

C

0..1

This IE shall be present with value "true" if the UE is a LTE Category M UE based on indication provided by the NG-RAN or by the MME at EPS to 5GS handover, as specified in 3GPP TS 23.502 [3].

When present, this IE shall be set as following:

– true: the UE is a Category M UE

– false (default): this UE is not a Category M UE.

redCapInd

boolean

C

0..1

This IE shall be present with value "true" if the UE is a NR RedCap UE based on indication provided by the NG-RAN, as specified in 3GPP TS 23.502 [3].

When present, this IE shall be set as following:

– true: the UE is a NR RedCap UE

– false (default): this UE is not a NR RedCap UE.

moExpDataCounter

MoExpDataCounter

C

0..1

This IE shall be present if a non-zero MO Exception counter has not been reported yet to SMF.

When present, this IE shall contain the MO Exception Data Counter, as specified in clause 5.31.14.3 of 3GPP TS 23.501 [2].

cagData

CagData

O

0..1

Closed Access Group Data

When present, the provisioningTime attribute (from the CagData data type) shall be absent.

NPN

managementMdtInd

boolean

C

0..1

This flag shall be present with value "true" if Management Based Minimization of Drive Tests (MDT) is allowed, as specified in 3GPP TS 32.422 [30].

When present, this IE shall be set as following:

– true: management based MDT is allowed.

– false (default): management based MDT is not allowed.

immediateMdtConf

ImmediateMdtConf

C

0..1

This IE shall be sent by the source AMF to the target AMF, if the Job Type indicates Immediate MDT. See clause 4.10 of 3GPP TS 32.422 [30].

ecRestrictionDataWb

EcRestrictionDataWb

C

0..1

This IE shall be present if the AMF determines whether Enhanced Coverage is restricted or not for the UE for WB-N1 mode.

If absent, this IE indicates Enhanced Coverage is not restricted for WB-N1 mode.

(NOTE 3)

ecRestrictionDataNb

boolean

C

0..1

This IE shall be present if the AMF determines whether Enhanced Coverage is restricted or not for the UE for NB-N1 mode.

If present, this IE shall indicate whether Enhanced Coverage for NB-N1 mode is restricted or not.

– true: Enhanced Coverage for NB-N1 mode is restricted.

– false or absent: Enhanced Coverage for NB-N1 mode is allowed. (NOTE 3)

iabOperationAllowed

boolean

O

0..1

This IE shall be present if the UE is allowed for IAB operation. It may be present otherwise.

When present, it shall indicate whether the UE is allowed for IAB operation, as follows:

– true: indicates that the UE is allowed for IAB operation.

– false: indicates that the UE is not allowed for IAB operation.

proseContext

ProseContext

O

0..1

This IE shall be present if available (see clause 6.7 of 3GPP TS 23.304 [51]).

When present, this IE shall indicate the parameters related to the ProSe services.

ProSe

analyticsSubscriptionList

array(AnalyticsSubscription)

C

1..N

This IE shall be present if the AMF has created analytics subscription(s) towards NWDAF related to the UE.

If present, this IE shall include the list of analytics subscriptions, as specified in clauses 5.2.2.2.2 and 5.2.2.2.11 of 3GPP TS 23.502 [3].

pcfUepBindingInfo

string

C

0..1

This IE shall be present if Binding Indication was received for UE Policy Association resource from the PCF. When present, this IE shall contain the Binding indication of the PCF’s UE Policy Association resource and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

pcfAmpBindingInfo

string

C

0..1

This IE shall be present if Binding Indication was received for AM Policy Association resource from the PCF. When present, this IE shall contain the Binding indications of the PCF’s AM policy Association resource and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

usedServiceAreaRestriction

ServiceAreaRestriction

O

0..1

When present, this IE shall include the Service Area Restriction from PCF.

praInAmPolicy

map(PresenceInfo)

O

1..N

When present, this IE shall include the map of PRA Information for the subscribed "PRA_CHANGE" PolicyReqTrigger in the AM Policy Association.

The key of the map shall be the "praId" attribute within the PresenceInfo data type. The "presenceState" attribute within the PresenceInfo data type shall not be supplied here.

praInUePolicy

map(PresenceInfo)

O

1..N

When present, this IE shall include the map of PRA Information for the subscribed "PRA_CHANGE" PolicyReqTrigger in the UE Policy Association.

The key of the map shall be the "praId" attribute within the PresenceInfo data type. The "presenceState" attribute within the PresenceInfo data type shall not be supplied here.

updpSubscriptionData

UpdpSubscriptionData

O

0..1

When present, this IE shall include the subscription resource in the AMF for a UE policy delivery related N1 message notification.

smPolicyNotifyPduList

array(PduSessionInfo)

C

1..N

This IE shall be present if it has been received from the PCF for the UE, i.e. the PCF for the AM Policy Association and possibly the UE Policy Association.

When present, this IE shall contain the information (Slice and DNN combination) of the PDU session(s) applicable for the notification of SM Policy Association Establishment and Termination events.

(NOTE 5)

SPAE

pcfUeCallbackInfo

PcfUeCallbackInfo

C

0..1

This IE shall be present if the smPolicyNotifyPduList IE is present.

When present, this IE shall contain the callback information of the PCF for the UE to receive SM Policy Association Establishment and Termination events notification from the PCF for the SM Policy.

(NOTE 5)

SPAE

uePositioningCap

UePositioningCapabilities

O

0..1

When present, this IE shall indicate the positioning capabilities supported by the UE.

snpnOnboardInd

boolean

C

0..1

This IE shall be present if the UE is registered for onboarding in an SNPN.

When present, it shall indicate the following:

– true: indicates that the UE is registered for onboarding in an SNPN.

– false (default): indicates that the UE is not registered for onboarding in an SNPN.

eNPN

astiDistributionIndication

boolean

O

0..1

When present, this IE shall indicate whether the access stratum time distribution via Uu reference point should be activated or deactivated for the UE.

When present, this IE shall be set as following:

– true: ASTI distribution is activated for the UE.

– false (default): ASTI distribution is deactivated for the UE.

tsErrorBudget

integer

O

0..1

When present, this IE shall indicate the Uu time synchronization error budget for the time synchronization service (as described in clause 5.27.1 in TS 23.501 [2]). It indicates the value in nano seconds.

smfSelInfo

SmfSelectionData

C

0..1

This IE shall be present if conditions for SMF Selection information replacement are received from the PCF for AM Policy.

When present, It shall include the conditions for SMF selection information replacement, as determined by the PCF.

pcfUeSliceMbrList

map(SliceMbr)

C

1..N

This IE shall be present when UE Slice MBR(s) were received from the PCF for AM Policy.

When present, this IE shall include one or more UE-Slice-MBR(s) as determined by the PCF for allowed S-NSSAI(s). The key of the map is the S-NSSAI in the allowed NSSAI to which the UE-Slice-MBR belongs.

smsfSetId

NfSetId

C

0..1

This IE shall be present if available.

When present, this IE shall contain the NF Set ID of the SMSF serving the UE.

smsfServiceSetId

NfServiceSetId

C

0..1

This shall be present, if available.

When present, it shall contain the NF Service Set ID of the SMSF’s service instance serving the UE.

smsfBindingInfo

string

C

0..1

This IE shall be present if available.

When present, this IE shall contain the binding indication of the UE Context for SMS in SMSF and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

disasterRoamingInd

boolean

C

0..1

This IE shall be present if the UE is registered for disaster roaming. It may be present otherwise.

When present, this IE shall be set as follows:

– true: UE is registered for Disaster Roaming service;

– false (default): UE is not registered for Disaster Roaming service.

disasterPlmn

PlmnId

C

0..1

This IE shall be included if the disasterRoamingInd is present and set to "true".

When present, this IE includes the PLMN of the UE which has faced disaster condition

NOTE 1: If the restrictedPrimaryRatList and restrictedSecondaryRatList attributes are supported by the sender, the sender shall include the list of RAT Types that are restricted, if any, in the restrictedRatList attribute, shall include the list of RAT Types that are restricted for use as primary RAT, if any, in the restrictedPrimaryRatList attribute and shall include the list of RAT Types that are restricted for use as secondary RAT, if any, in the restrictedSsecondaryRatList attribute. If the restrictedPrimaryRatList and restrictedSecondaryRatList attributes are supported by the receiver, the receiver shall use the data in the restrictedPrimaryRatList attribute, if received, as the list of RAT Types that are restricted for use as primary RAT for the UE, and shall use the data in the restrictedSecondaryRatList attribute, if received, as the list of RAT Types that are restricted for use as secondary RAT for the UE, otherwise the receiver shall use the data in the restrictedRatList attribute, if received, as the list of RAT Types that are restricted for the UE.

NOTE 2: A particular PDU session not supported by the target AMF shall not be transferred, e.g. MA-PDU session context shall not be transferred if target AMF does not support ATSSS.

NOTE 3: After ecRestrictionDataWb and/or ecRestrictionDataNb attributes are sent from source AMF to target AMF to build the UeContext in the target AMF, the target AMF shall re-determine the EC restriction information based on the received subscription data from UDM and UE 5GMM capability because EC restriction information may change (e.g. due to that subscription data in UDM is changed but not notified the old AMF yet) and then compare the re-determined EC restriction information with the one received in the UeContext. If the target AMF finds EC restriction information has changed after comparing, the target AMF shall proceed as described in clause 5.31.12, 3GPP TS 23.501 [2].

NOTE 4: If present, this attribute shall be used together with routingIndicator. This attribute is only used by the HPLMN in roaming scenarios.

NOTE 5: If the information as indicated in both IEs were received from the PCF for the UE or from the old AMF in UE Context, the AMF shall identify whether a non-roaming or local breakout PDU session is applicable for SM Policy Association events, i.e, whethe the slice and DNN combination of the PDU session is listed in the smPolicyNotifyPduList IE or not. If the PDU session is applicable for notification of SM Policy Association events , the AMF shall provide the callback information for the PCF of the UE contained in the pcfUeCallbackInfo IE to the SMF of a new PDU session via Create SM Context service operation, or to the SMF for an ongoing PDU session via Update SM Context service operation, together with the indication for notification of SM Policy Association events. See clause 4.3.2.2.1 and clause 4.3.3.2 of 3GPP TS 23.502 [3].

NOTE 6: This IE is deprecated. An AMF complying with this version of specification shall use the pcfAmpBindingInfo IE to carry the Binding indication of the AM Policy Association resource and use the pcfUepBindingInfo IE to carry the binding indication of the UE Policy Association resource.

pduSessionId

PduSessionId

M

1

Indicates the PDU Session Identity

n2InfoContent

N2InfoContent

C

0..1

This IE shall be present if a SMF related IE should be transferred. When present, the IE contains one of NGAP SMF related IEs specified in clause 9.3.4 of 3GPP TS 38.413 [12].

sNssai

Snssai

C

0..1

This IE shall be present if network slice information to be transferred for session management. When present, the IE indicates the network slice the PDU session belongs to. (NOTE)

homePlmnSnssai

Snssai

C

0..1

This IE shall be present during EPS to 5GS handover procedure for Home Routed PDU session.

When present, it shall carry the S-NSSAI for home PLMN.

ENS

iwkSnssai

Snssai

C

0..1

This IE shall be present during EPS to 5GS handover procedure with AMF relocation for Home Routed PDU session, if S-NSSAI for interworking is configured and used in the initial AMF, as specified in clause 4.11.1.2.2 of 3GPP TS 23.502 [3].

When present, this IE shall carry the S-NSSAI for interworking configured and used in the initial AMF for the PDU session.

ENS

subjectToHo

boolean

C

0..1

This IE shall be present if n2InfoContent carries a " Handover Required Transfer" IE. When present, it Indicates whether the PDU session shall be subject to handover to the target node.

NOTE: During EPS to 5GS handover procedure for Home Routed PDU session with AMF relocation, the source AMF shall set this IE to the S-NSSAI in the serving PLMN mapped from the S-NSSAI in home PLMN indicated by the homePlmnSnssai IE in the N2SmInformation data structure sent to target AMF.

ngapMessageType

Uinteger

C

0..1

This IE shall be present if PWS related N2 information is to be transferred, or during the AMF planned removal procedure with UDSF deployed procedure to transfer a RAN N2 message.

When present, it shall indicate the NGAP Message type of the ngapData as specified in clause 6.1.6.4.3.3. Its value equals the value of the Procedure Code defined in ASN.1 in clause 9.4.7 in 3GPP TS 38.413 [12].

ngapIeType

NgapIeType

C

0..1

This IE shall be present if SM, RAN, V2X or NRPPa related N2 information is to be transferred.

When present, it shall indicate the NGAP IE type of the ngapData as specified in clause 6.1.6.4.3.2.

ngapData

RefToBinaryData

M

1

This IE reference the N2 Information binary data corresponding to the N2 information class. See clause 6.1.6.4.3.

nfId

NfInstanceId

M

1

This IE shall carry the identifier of the Network Function (e.g. LMF) instance that is sending or receiving the NRPPa data.

nrppaPdu

N2InfoContent

M

1

This IE represents the encoded NGAP NRPPa-PDU IE, which is transparent to AMF.

serviceInstanceId

string

O

0..1

When present, this IE shall carry the Service Instance Identifier of the Service Instance (e.g. LMF) that is sending or receiving the NRPPa data.

messageIdentifier

Uint16

M

1

Identifies the warning message. Sender shall set this field to 0, if the pwsContainer IE carries PWS Failure Indication or PWS Restart Indication. The receiver shall ignore this IE if the pwsContainer IE carries PWS Failure Indication or PWS Restart Indication.

serialNumber

Uint16

M

1

identifies a particular message from the source and type indicated by the Message Identifier. Sender shall set this field to 0, if the pwsContainer IE carries PWS Failure Indication or PWS Restart Indication. The receiver shall ignore this IE if the pwsContainer IE carries PWS Failure Indication or PWS Restart Indication.

pwsContainer

N2InfoContent

M

1

This IE represents the PWS N2 information data part to be relayed between CBCF and AN.

bcEmptyAreaList

array(GlobalRanNodeId)

C

1..N

This IE shall be present if the NF consumer has previously requested the AMF to send the N2 response information for:

– WRITE-REPLACE-WARNING-REQUEST and the AMF has received WRITE-REPLACE-WARNING-RESPONSE from RAN node(s) not including the Broadcast Completed Area List IE, or

– PWS-CANCEL-REQUEST and the AMF has received PWS-CANCEL-RESPONSE from RAN node(s) not including the Broadcast Cancelled Area List IE.

When present, this IE shall list the RAN node(s) that has sent a

– WRITE-REPLACE-WARNING-RESPONSE not including the Broadcast Completed Area List IE, or

– PWS-CANCEL-RESPONSE not including the Broadcast Cancelled Area List IE.

sendRanResponse

boolean

O

0..1

This IE shall be present to request the AMF to send the N2 response information it has received from the RAN nodes to the NF Service Consumer.

When present, this IE shall be set as follows:

– true: send RAN response

– false (default): do not send RAN response.

The N2 information received from the RAN corresponds to

the Broadcast-Completed-Area-List IE or the Broadcast-Cancelled-Area-List IE defined in 3GPP TS 38.413 [12]. See clause 6.1.6.4.3.3.

omcId

OmcIdentifier

O

0..1

IE shall be present if the AMF is required to write the n2Information it has received from the RAN nodes into trace records on the OMC. When present, it indicates the identifier of OMC.

nfId

NfInstanceId

O

0..1

When present, this IE shall carry the instance identity of the NF Service Consumer (e.g. CBCF or PWS-IWF).

cause

N1N2MessageTransferCause

M

1

This IE shall provide the result of the N1/N2 message transfer at the AMF.

n1n2MsgDataUri

Uri

M

1

This IE shall contain the N1N2MessageTransfer request resource URI returned in the Location header when the N1/N2 message transfer was initiated (see clause 6.1.3.5.3.1).

This IE shall be used by the NF Service Consumer to correlate the notification with the UE or session for which the earlier N1/N2 message transfer was initiated.

If no Location header was returned when the N1/N2 message transfer was initiated, e.g. when a 200 OK response was sent for a UE in RRC inactive state, this IE shall be set to a dummy URI, i.e. an URI with no authority and an empty path (e.g. "http:").

retryAfter

Uinteger

O

0..1

This IE may be included if the AMF requests the NF Service Consumer to throttle sending further N1/N2 Message Transfer request for a short period, e.g. when UE is not responding to paging.

When present, this IE indicates the period in number of seconds. The NF consumer should not send new N1/N2 message transfer request during the indicated period.

(NOTE)

NOTE: This IE should be configured with a value less then 10 minutes, i.e. 600 seconds.

error

ProblemDetails

M

1

This IE shall provide the result of the N1/N2 message transfer processing at the AMF.

errInfo

N1N2MsgTxfrErrDetail

O

0..1

This IE may be included to provide additional information related to the error.

retryAfter

Uinteger

O

0..1

This IE may be included if the AMF requests the NF Service Consumer to stop sending the N1/N2 message before timeout, and to retry the N1/N2 message transfer request that was rejected after a timeout. The value shall be in seconds.

When included, the value shall be set to an estimate of the AMF on how long it will take before the AMF considers paging procedure as completed.

highestPrioArp

Arp

O

0..1

This IE may be included if the "cause" attribute in the ProblemDetails is set to "HIGHER_PRIORITY_REQUEST_ONGOING". When included this IE shall contain the ARP value of the highest priority QoS flow for which currently paging is ongoing.

The NF Service Consumer shall not initiate an Namf_Communication_N1N2MessageTransfer operation for the same UE with an ARP value having a lower priority than this or the same priority as this, until the retryAfter timer expires.

maxWaitingTime

DurationSec

C

0..1

This IE shall be present when:

– extBufSupport attribute with value "true" received in the request; and

– the UE is not reachable due to the UE in MICO mode or the UE using extended idle mode DRX.

When present, this IE shall indicate the estimated maximum waiting time in seconds before the UE will be reachable.

If the UE is in MICO mode, the AMF determines the Estimated Maximum Wait time based on the next expected periodic registration by the UE or by implementation. If the UE is using extended idle mode DRX, the AMF determines the Estimated Maximum Wait time based on the start of the next Paging Time Window.

(see clause 4.25.5 of 3GPP 23.502 [3])

result

N2InformationTransferResult

M

1

This IE shall provide the result of the N2 information transfer processing at the AMF.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

pwsRspData

PWSResponseData

C

0..1

This IE shall be present if the n2InformationClass is "PWS" in N2InformationTransferReqData.

accessType

AccessType

M

1

This IE shall contain the access type of the MM context.

nasSecurityMode

NasSecurityMode

C

0..1

This IE shall be present if available in 3GPP access MM context. When present, this IE shall contain the used NAS security mode of the UE.

epsNasSecurityMode

EpsNasSecurityMode

C

0..1

This IE shall be present in 3GPP access MM context if selected EPS NAS security algorithms have been previously provided to the UE, as specified in clause 6.7.2 of 3GPP TS 33.501 [27].

When present, this IE shall contain the selected EPS NAS security algorithms provided to the UE.

nasDownlinkCount

NasCount

C

0..1

This IE shall be present if available in 3GPP access MM context. When present, this IE shall contain the NAS downlink count of the UE.

nasUplinkCount

NasCount

C

0..1

This IE shall be present if available in 3GPP access MM context. When present, this IE shall contain the NAS uplink count of the UE.

ueSecurityCapability

UeSecurityCapability

C

0..1

This IE shall be present if available in 3GPP access MM context. When present, this IE shall contain the UE security capability

s1UeNetworkCapability

S1UeNetworkCapability

C

0..1

This IE shall be present if available in 3GPP access MM context. When present, this IE shall contain the S1 UE network capabilities.

allowedNssai

array(Snssai)

C

1..N

This IE shall be present if the source AMF and the target AMF are in the same PLMN and if available. When present, this IE shall contain the allowed NSSAI for the access type.

nssaiMappingList

array(NssaiMapping)

C

1..N

This IE shall be present if the source AMF and the target AMF are in the same PLMN and if available. When present, this IE shall contain the mapping of the allowed NSSAI for the UE.

allowedHomeNssai

array(Snssai)

C

1..N

This IE shall be present if the source AMF and the target AMF are in different PLMNs and if available. When present, this IE shall contain the home S-NSSAIs corresponding to the allowed NSSAI for the access type.

nsInstanceList

array(NsiId)

C

1..N

This IE shall be present if available. When present, it shall indicate the Network Slice Instances selected for the UE.

expectedUEbehavior

ExpectedUeBehavior

C

0..1

This IE shall be present if available. When present it shall indicate the expected UE moving trajectory and its validity period. See 3GPP TS 23.502 [3] clause 4.15.6.3.

ueDifferentiationInfo

UeDifferentiationInfo

C

0..1

This IE shall be present if available. When present it shall indicate UE Differentiation Information and its validity period.

plmnAssiUeRadioCapId

PlmnAssiUeRadioCapId

C

0..1

This IE shall be present if the source AMF supports RACS feature and if available. When present it shall be the PLMN-assigned UE Radio Capability ID.

(NOTE 1)

manAssiUeRadioCapId

ManAssiUeRadioCapId

C

0..1

This IE shall be present if the source AMF supports RACS feature and if available. When present it shall be the Manufacturer-assigned UE Radio Capability ID.

ucmfDicEntryId

string

C

0..1

This IE shall be present if the source AMF supports RACS feature and if available. When present it shall be the UCMF allocated dicEntryId received from the UCMF.

n3IwfId

GlobalRanNodeId

C

0..1

This IE shall be present during Registration procedure with AMF changes as specified in clause 4.2.2.2 of 3GPP TS 23.502 [3] and inter AMF handover procedure, if the old AMF holds UE context established via N3IWF and if the PDU sessions associated with the non-3GPP access are transferred to the new AMF (see clause 5.2.2.2.1.1 and 5.2.2.2.3.1).

When present, this IE shall contain the Global RAN Node ID of N3IWF.

wagfId

GlobalRanNodeId

C

0..1

This IE shall be present during Registration procedure with AMF changes as specified in clause 4.2.2.2 of 3GPP TS 23.502 [3] and inter AMF handover procedure, if the old AMF holds UE context established via W-AGF and if the PDU sessions associated with the non-3GPP access are transferred to the new AMF (see clause 5.2.2.2.1.1 and 5.2.2.2.3.1).

When present, this IE shall contain the Global RAN Node ID of W-AGF.

tngfId

GlobalRanNodeId

C

0..1

This IE shall be present during Registration procedure with AMF changes as specified in clause 4.2.2.2 of 3GPP TS 23.502 [3] and inter AMF handover procedure, if the old AMF holds UE context established via TNGF and if the PDU sessions associated with the non-3GPP access are transferred to the new AMF (see clause 5.2.2.2.1.1 and 5.2.2.2.3.1).

When present, this IE shall contain the Global RAN Node ID of TNGF.

anN2ApId

integer

C

0..1

This IE shall be present during Registration procedure with AMF changes, as specified in clause 4.2.2.2 of 3GPP TS 23.502 [3] and inter AMF handover procedure, if the old AMF holds UE context established via N3IWF/W-AGF/TNGF and the UE is in CM-CONNECTED state via N3IWF/W-AGF/TNGF and if the PDU sessions associated with the non-3GPP access are transferred to the new AMF (see clause 5.2.2.2.1.1 and 5.2.2.2.3.1).

When present, this IE shall contain the RAN UE NGAP ID over N2 interface.

nssaaStatusList

array(NssaaStatus)

C

1..N

This IE shall be present if available. When present, it shall contain the subscribed S-NSSAIs subject to NSSAA procedure and for which a status information is available. See 3GPP TS 23.501 [2] clause 5.15.5.2.1 and 3GPP TS 23.502 [3] clause 5.2.2.2.2.

pendingNssaiMappingList

array(NssaiMapping)

C

1..N

This IE shall be present if available. When present, this IE shall contain the mapping of the pending NSSAI for the UE.

uuaaMmStatus

UuaaMmStatus

C

0..1

This IE shall be present if available in 3GPP access MM context.

When present, this IE shall indicate the status of UUAA-MM if the AMF is configured to perform the UAV authentication/authorization at 5GS registration as described in clause 5.2.2 of 3GPP TS 23.256 [56].

NOTE 1: If the AMF supports RACS and the AMF detects that the selected PLMN during a service request procedure is different from the currently registered PLMN for the UE, the AMF stores the UE Radio Capability ID of the newly selected PLMN in the UE context as described in clause 5.2.3.2 of 3GPP TS 23.502 [3], and provides this UE Radio Capability ID to the target AMF during any subsequent inter-AMF mobility.

ngKsi

NgKsi

M

1

Indicates the KSI used for the derivation of the keyAmf sent.

keyAmf

KeyAmf

M

1

Indicates the K_amf or K’_amf

nh

string

C

0..1

This IE shall be present during N2 handover procedure as specified in clause 6.9.2.3.3 of 3GPP TS 33.501 [27]. When present, this IE indicates the Next Hop value used for the key derivation. The value is encoded as a string of hexadecimal characters.

Pattern: ‘^[A-Fa-f0-9]+$’

ncc

integer

C

0..1

This IE shall be present during N2 handover procedure as specified in clause 6.9.2.3.3 of 3GPP TS 33.501 [27]. When present, this IE indicates the NH Chaining Counter. The value is within the range 0 to 7.

keyAmfChangeInd

boolean

C

0..1

This IE shall be included, with a value "true", if the source AMF requires the target AMF to perform AS key re-keying, during N2 handover procedure as specified in clause 6.9.2.3.3 of 3GPP TS 33.501 [27].

keyAmfHDerivationInd

boolean

C

0..1

This IE shall be included, with a value "true", if the source AMF has performed horizontal K_AMF derivation, which means a new K_AMF has been calculated.

integrityAlgorithm

IntegrityAlgorithm

M

1

Indicates the integrity protection algorithm

cipheringAlgorithm

CipheringAlgorithm

M

1

Indicates the ciphering algorithm

pduSessionId

PduSessionId

M

1

Indicates the identifier of the PDU Session.

smContextRef

Uri

M

1

Indicates the resource URI of the SM context, including the apiRoot (see clause 6.1.3.3.2 of 3GPP TS 29.502 [16]).

When present, it shall carry the URI of SM Context of:

– I-SMF, for a PDU session with I-SMF; or

– V-SMF, for HR PDU session; or

– SMF, for non-roaming PDU session without I-SMF, or LBO roaming PDU session;

sNssai

Snssai

M

1

Indicates the associated S-NSSAI for the PDU Session. It shall be the S-NSSAI in HPLMN in non-roaming, LBO roaming or HR roaming.

additionalSnssai

Snssai

C

0..1

This IE shall be present in intra-VPLMN mobility of LBO roaming and HR roaming.

When present, this IE shall indicate the associated S-NSSAI in VPLMN for the PDU Session.

dnn

Dnn

M

1

This IE shall indicate the Data Network Name. The DNN shall be the full DNN (i.e. with both the Network Identifier and Operator Identifier) for a HR PDU session, and it should be the full DNN in LBO and non-roaming scenarios. If the Operator Identifier is absent, the serving core network operator shall be assumed.

selectedDnn

Dnn

C

0..1

This IE shall be present, if another DNN other than the UE requested DNN is selected for this PDU session.

When present, it shall contain the selected DNN. The DNN shall be the full DNN (i.e. with both the Network Identifier and Operator Identifier) for a HR PDU session, and it should be the full DNN in LBO and non-roaming scenarios. If the Operator Identifier is absent, the serving core network operator shall be assumed.

accessType

AccessType

M

1

Indicates the access type of the PDU session.

additionalAccessType

AccessType

C

0..1

Indicates the additional access type for a MA PDU session, if the UE registers to both 3GPP access and Non-3GPP access.

allocatedEbiList

array(EbiArpMapping)

C

1..N

This IE shall be present when at least one EBI is allocated to the PDU session.

When present, this IE shall contain the EBIs currently allocated to the PDU session.

hsmfId

NfInstanceId

C

0..1

This IE shall be present for non-roaming and home-routed PDU sessions.

When present, it shall indicate the associated:

– home SMF for HR PDU Session, or

– SMF, for non-roaming PDU session, regardless of whether an I-SMF is involved or not.

hsmfSetId

NfSetId

C

0..1

This IE shall be present, if available.

When present, this IE shall contain the NF Set ID of the home SMF or the SMF indicated by hsmfId.

hsmfServiceSetId

NfServiceSetId

C

0..1

This IE shall be present, if available.

When present, this IE shall contain the NF Service Set ID of the selected PDUSession service instance of home SMF or the SMF indicated by hsmfId.

smfBinding

SbiBindingLevel

C

0..1

This IE shall be present if available, for a non-roaming PDU session. When present, this IE shall contain the SBI binding level of the SMF’s SM context resource.

vsmfId

NfInstanceId

C

0..1

This IE shall be present for roaming PDU sessions. When present, it shall indicate the associated visited SMF for home-routed the PDU Session, or the SMF for the local-breakout PDU session (regardless of whether an I-SMF is involved or not).

vsmfSetId

NfSetId

C

0..1

This IE shall be present, if available. When present, this IE shall contain the NF Set ID of the V-SMF.

vsmfServiceSetId

NfServiceSetId

C

0..1

This IE shall be present, if available. When present, this IE shall contain the NF Service Set ID of the V-SMF’s PDUSession service instance.

vsmfBinding

SbiBindingLevel

C

0..1

This IE shall be present, if available. When present, this IE shall contain the SBI binding level of the V-SMF’s SM context resource.

ismfId

NfInstanceId

C

0..1

This IE shall be present if I-SMF is involved in the PDU session. When present, it shall indicate the associated I-SMF for the PDU Session.

DTSSA

ismfSetId

NfSetId

C

0..1

This IE shall be present, if available. When present, this IE shall contain the NF Set ID of the I-SMF.

DTSSA

ismfServiceSetId

NfServiceSetId

C

0..1

This IE shall be present, if available. When present, this IE shall contain the NF Service Set ID of the I-SMF’s PDUSession service instance.

DTSSA

ismfBinding

SbiBindingLevel

C

0..1

This IE shall be present if available. When present, this IE shall contain the SBI binding level of the I-SMF’s SM Context resource.

DTSSA

nsInstance

NsiId

C

0..1

This IE shall be present if available. When present, this IE shall Indicate Network Slice Instance for the PDU Session

smfServiceInstanceId

string

O

0..1

When present, this IE shall contain the serviceInstanceId of the SMF PDUSession service instance serving the SM Context, i.e. of:

– the I-SMF, for a PDU session with I-SMF;

– the V-SMF, for a HR PDU session; or

– the SMF, for a non-roaming or an LBO roaming PDU session without I-SMF.

This IE may be used by the AMF to identify PDU session contexts affected by a failure or restart of the SMF service instance (see clause 6.2 of 3GPP TS 23.527 [33]).

maPduSession

boolean

C

0..1

This IE shall be present if available. When present, this IE shall indicate whether it is an MA PDU session.

true: indicates the PDU session is MA PDU session;

false (default): the PDU session is not MA PDU session.

cnAssistedRanPara

CnAssistedRanPara

C

0..1

This IE shall be present if available.

When present, this IE shall contain the PDU Session specific parameters received from the SMF and used by the AMF to derive the Core Network assisted RAN parameters tuning.

nrfManagementUri

Uri

C

0..1

If included, this IE shall contain the API URI of the NFManagement Service (see clause 6.1.1 of 3GPP TS 29.510 [29]) of the NRF or hNRF.

It shall be present if it is returned from the NSSF or hNSSF (see clause 6.1.6.2.7 of 3GPP TS 29.531 [18]).

nrfDiscoveryUri

Uri

C

0..1

If included, this IE shall contain the API URI of the NFDiscovery Service (see clause 6.2.1 of 3GPP TS 29.510 [29]) of the NRF or hNRF.

It shall be present if it is returned from the NSSF or hNSSF (see clause 6.1.6.2.7 of 3GPP TS 29.531 [18]).

nrfAccessTokenUri

Uri

C

0..1

If included, this IE shall contain the API URI of the Access Token Service (see clause 6.3.2 of 3GPP TS 29.510 [29]) of the NRF or hNRF.

It shall be present if it is returned from the NSSF or hNSSF (see clause 6.1.6.2.7 of 3GPP TS 29.531 [18]).

smfBindingInfo

string

C

0..1

This IE shall be present if available, for a non-roaming PDU session. When present, this IE shall contain the Binding indications of the SMF’s SM context resource and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

vsmfBindingInfo

string

C

0..1

This IE shall be present, if available. When present, this IE shall contain the Binding indications of the V-SMF’s SM context resource and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

ismfBindingInfo

string

C

0..1

This IE shall be present if available. When present, this IE shall contain the Binding indications of the I-SMF’s SM Context resource and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

DTSSA

interPlmnApiRoot

Uri

C

0..1

This IE shall be present if this information is available.

When present, it shall contain the apiRoot of the SM context to be used in inter-PLMN signalling request targeting the SM context.

(NOTE)

pgwFqdn

Fqdn

O

0..1

FQDN of the PGW in the PGW-C+SMF, to be included for interworking with EPS.

pgwIpAddr

IpAddress

O

0..1

IP Address of the PGW in the PGW-C+SMF, to be included for interworking with EPS.

plmnId

PlmnId

O

0..1

PLMN where the PGW-C+SMF is located.

anchorSmfSupportedFeatures

SupportedFeatures

O

0..1

When present, this IE shall include the features of the Nsmf_PDUSession service (see clause 6.1.8 of 3GPP TS 29.502 [16]) that are supported by the H-SMF (or the SMF for a PDU sessions with I-SMF).

(NOTE 2)

anchorSmfOauth2Required

boolean

O

0..1

This IE may be present when new AMF and old AMF belong to the same PLMN.

When present, this IE shall indicate whether the H-SMF (or the SMF for a PDU session with I-SMF) requires Oauth2-based authorization for accessing its Nsmf_PDUSession service

– true: OAuth2 based authorization is required.

– false: OAuth2 based authorization is not required.

The absence of this IE means that no indication is available about the usage of Oauth2 for authorization of the anchor SMF’s Nsmf_PDUSession service.

NOTE 1: During an inter-PLMN mobility, the target AMF shall replace the apiRoot of the smContextRef with the interPlmnApiRoot if available and send the resulting smContextRef in the Create SM Context request towards the target V-SMF, I-SMF or anchor SMF. See 3GPP TS 29.502 [16].

NOTE 2: The new AMF may use this IE to know the supported features of the H-SMF (or the SMF for a PDU session with I-SMF) and take action based on the supported features, e.g. the new AMF shall release the PDU session when V-SMF needs to be changed but the H-SMF does not support V-SMF change.

mappedSnssai

Snssai

M

1

Indicates the mapped S-NSSAI in the serving PLMN

hSnssai

Snssai

M

1

Indicates the S-NSSAI in home PLMN

transferStatus

UeContextTransferStatus

M

1

This IE shall indicate if the previous UE context transfer was completed.

toReleaseSessionList

array(PduSessionId)

C

1..N

This IE shall be present during UE Context Transfer procedure, if there are any PDU session(s) associated with Network Slice(s) which become no longer available.

When present, this IE shall include all the PDU session(s) associated with no longer available S-NSSAI(s).

pcfReselectedInd

boolean

C

0..1

This IE shall be present and set to true if the target AMF has decided to select a new PCF for AM Policy and/or UE Policy other than the one which was included in the UeContext by the old AMF.

When present, it shall be set as follows:

– true: the target AMF has selected new PCF(s) other than the one which was included in the UeContext by the old AMF for AM Policy and/or UE Policy.

smfChangeInfoList

array(SmfChangeInfo)

C

1..N

This IE shall be present during an inter-AMF registration procedure, if there is an I-SMF or V-SMF change or removal for the related PDU session(s).

When present, this IE shall indicate the I-SMF/V-SMF situation after the registration completion at the target AMF.

DTSSA

analyticsNotUsedList

array(Uri)

C

1..N

This IE shall be present to include the list of resource URIs of the analytics subscription(s) that are not taken over in the target AMF.

toReleaseSessionInfo

array(ReleaseSessionInfo)

C

1..N

This IE shall be present during UE Context Transfer procedure, if there are any PDU session(s) that cannot be supported in the target AMF for a reason other than no longer available S-NSSAI(s) as specified in step 1 of clause 5.2.2.2.2.1.

When present, this IE shall include list of the PDU session(s) and the release cause.

error

ProblemDetails

M

1

Represents the application error information. The application level error cause shall be encoded in the "cause" attribute.

failureDetails

AssignEbiFailed

M

1

Describes the details of the failure including the list of ARPs for which the EBI assignment failed.

ueContext

UeContext

M

1

Represents an individual ueContext resource to be created

targetId

NgRanTargetId

M

1

Represents the identification of target RAN

sourceToTargetData

N2InfoContent

M

1

This IE shall be included to contain the "Source to Target Transparent Container".

pduSessionList

array(N2SmInformation)

M

1..N

This IE shall be included to contain the list of N2SmInformation, where each N2SmInformation includes the "Handover Required Transfer" received from the source RAN per PDU session ID.

n2NotifyUri

Uri

M

1

This IE shall contain a callback URI to receive the N2 Information Notification.

ueRadioCapability

N2InfoContent

C

0..1

This IE shall be included to contain the "UE Radio Capability Information" if available.

ueRadioCapabilityForPaging

N2InfoContent

C

0..1

This IE shall be included to contain the "UE Radio Capability for Paging" if available.

ngapCause

NgApCause

C

0..1

This IE shall be present, if available. When present, it shall represent the NGAP Cause received from RAN.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

servingNetwork

PlmnIdNid

C

0..1

A Source AMF complying with this release of the specification shall include this IE to indicate the current Serving Network.

When present, this IE shall contain the serving core network operator PLMN ID and, for an SNPN, the NID that together with the PLMN ID identifies the SNPN.

ueContext

UeContext

M

1

Represents the newly created individual ueContext resource

targetToSourceData

N2InfoContent

M

1

This IE shall contain the "Target to Source Transparent Container".

pduSessionList

array(N2SmInformation)

M

1..N

This IE shall be included to contain the list of N2SmInformation, where each N2SmInformation includes the "Handover Command Transfer" received from the SMF, per PDU session ID.

pcfReselectedInd

boolean

C

0..1

This IE shall be present and set to true if the target AMF has decided to select a new PCF for AM Policy and/or UE Policy other than the one which was included in the UeContext by the old AMF.

When present, it shall be set as follows:

– true: the target AMF has selected a new PCF other than the one which was included in the UeContext by the old AMF for AM Policy and/or UE Policy.

failedSessionList

array(N2SmInformation)

C

1..N

This IE shall be included to contain a list of N2SmInformation, where each N2SmInformation includes the "Handover Preparation Unsuccessful Transfer" N2 SM content either received from the SMF for a PDU session failed to be handed over or generated by the target AMF for a PDU session not accepted by the target AMF (e.g. due to no response from the SMF within a maximum wait timer or due to non-available S-NSSAI in the target AMF). See NOTE.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

analyticsNotUsedList

array(Uri)

C

1..N

This IE shall be present to include the list of resource URIs of the analytics subscription(s) that are not taken over in the target AMF.

NOTE: As an exception, the AMF generates N2 SM Information (Handover Preparation Unsuccessful Transfer IE) for a PDU session not accepted by the AMF, since this N2 SM IE needs to be included in the Handover Command sent by the source AMF to the source NG-RAN; this N2 SM IE carries a Cause value.

error

ProblemDetails

M

1

Represents the detailed application error information. The application level error cause shall be encoded in the "cause" attribute.

ngapCause

NgApCause

C

0..1

This IE shall be present, if available. When present, it shall represent the NGAP Cause received from RAN.

targetToSourceFailureData

N2InfoContent

C

0..1

This IE shall be present if a "Target to Source Failure Transparent Container" has been received from the target NG-RAN.

When present, this IE shall contain this container.

NPN

ranNodeId

GlobalRanNodeId

M

1

Indicates the identity of the RAN node. The IE shall contain either the gNB ID or the NG-eNB ID.

tai

Tai

M

1

Indicates the selected TAI.

error

ProblemDetails

M

1

More information on the error shall be provided in the "cause" attribute of the "ProblemDetails" structure.

pwsErrorInfo

PWSErrorData

C

0..1

This IE shall be present if the n2InformationClass is "PWS" in N2InformationTransferReqData.

ngapMessageType

Uinteger

M

1

This IE shall identify the message type of the message being sent. Its value is the numeric code of the Procedure Code defined in ASN.1 in clause 9.4.7 in 3GPP TS 38.413 [12].

serialNumber

Uint16

M

1

This IE shall contain the Serial Number of the associated PWS response message.

messageIdentifier

integer

M

1

This IE shall contain the Message Identifier of the associated PWS response message.

unknownTAIList

array(Tai)

O

1..N

This IE shall contain the Unknown Tracking Area List which may be present in the associated PWS response message.

namfCause

integer

M

1

Represents the cause value for the error that the AMF detected.

Cause values:

0 – Message accepted

1 – Parameter not recognised

2 – Parameter value invalid

3 – Valid message not identified

4 – Tracking area not valid

5 – Unrecognised message

6 – Missing mandatory element

7 – AMF capacity exceeded

8 – AMF memory exceeded

9 – Warning broadcast not supported

10 – Warning broadcast not operational

11 – Message reference already used

12 – Unspecified error

13 – Transfer syntax error

14 – Semantic error

15 – Message not compatible with receiver state

tsc

ScType

M

1

Indicates whether the security context type is native or mapped.

ksi

integer

M

1

Indicates the key set identifier value. The value is within the range 0 to 6.

keyType

KeyAmfType

M

1

Indicates whether the keyAmf represents K_amf or K’_amf.

keyVal

string

M

1

Indicates the key value. The key value is encoded as a string of hexadecimal characters.

Pattern: ‘^[A-Fa-f0-9]$’

expMoveTrajectory

array(UserLocation)

M

1..N

This IE shall contain a list of user location areas where the UE is expected to move.

validityTime

DateTime

M

1

This IE shall contain the time upto which the UE moving trajectory is valid.

regStatusTransferComplete

boolean

M

1

This IE shall indicate if the status update of UE context transfer is completed successfully at the source AMF or not.

The value shall be set to true if the context transfer is completed successfully and false if the context transfer did not complete successfully.

n2InfoContent

N2InfoContent

M

1

This IE shall contain the N2 RAN information to transfer.

secRatDataUsageList

array(N2SmInformation)

C

1..N

This IE shall be present in the N2InfoNotify response sent by the source AMF to the target AMF during an

Inter NG-RAN node N2 based handover procedure (see clause 5.2.2.3.6.2), if Secondary Rat Usage Data are available at the source AMF for one or more PDU sessions.

When present, this IE shall contain a list of N2SmInformation, where each N2SmInformation includes the "Secondary RAT Data Usage Report Transfer" information received from the source RAN for a given PDU session.

The sNssai IE and subjectToHo IE shall not be included in N2SmInformation.

singleNssai

Snssai

M

1

S-NSSAI

dnn

Dnn

M

1

This IE shall indicate the Data Network Name.

The DNN shall be the full DNN (i.e. with both the Network Identifier and Operator Identifier) for a HR PDU session, and it should be the full DNN in LBO and non-roaming scenarios. If the Operator Identifier is absent, the serving core network operator shall be assumed.

smallDataRateStatus

SmallDataRateStatus

M

1

Small data rate status related to the S-NSSAI and Dnn.

pduSessionIdList

array(PduSessionId)

M

1..N

PDU Session ID(s) for which the smfChangeInd applies.

smfChangeInd

SmfChangeIndication

M

1

Indicates the I-SMF or V-SMF change or removal.

nrV2xServicesAuth

NrV2xAuth

C

0..1

This IE shall be present if the UE is authorized to use the NR sidelink for V2X services.

lteV2xServicesAuth

LteV2xAuth

C

0..1

This IE shall be present if the UE is authorized to use the LTE sidelink for V2X services.

nrUeSidelinkAmbr

BitRate

C

0..1

This IE shall be present if the UE is authorized for NR V2X services.

When present, this IE contains subscription data on UE-PC5-AMBR for NR V2X services.

lteUeSidelinkAmbr

BitRate

C

0..1

This IE shall be present if the UE is authorized for LTE V2X services.

When present, this IE contains subscription data on UE-PC5-AMBR for LTE V2X services.

pc5QoSPara

Pc5QoSPara

C

0..1

This IE shall be present if the UE is authorized for NR V2X services.

When present, this IE contains policy data on the PC5 QoS parameters.

jobType

JobType

M

1

This IE shall indicate the Job type for MDT, see 3GPP TS 32.422 [30].

measurementLteList

array(MeasurementLteForMdt)

C

1..N

This IE shall be present if available.

When present, this IE shall contain a list of the measurements that shall be collected for LTE.

measurementNrList

array(MeasurementNrForMdt)

C

1..N

This IE shall be present if available, when present, this IE shall contain a list of the measurements that shall be collected for NR.

reportingTriggerList

array(ReportingTrigger)

C

1..N

This IE shall be present if available.

When present, this IE shall contain a list of the reporting triggers.

reportInterval

ReportIntervalMdt

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the interval between the periodical measurements to be taken when UE is in connected in LTE.

reportIntervalNr

ReportIntervalNrMdt

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the interval between the periodical measurements to be taken when UE is in connected in NR.

reportAmount

ReportAmountMdt

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the number of measurement reports that shall be taken for periodical reporting while UE is in connected.

eventThresholdRsrp

integer

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the Event Threshold for RSRP.

Minimum = 0. Maximum = 97.

eventThresholdRsrq

integer

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the Event Threshold for RSRQ.

Minimum = 0. Maximum = 34.

eventThresholdRsrpNr

integer

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the Event Threshold for RSRP in NR.

Minimum = 0. Maximum = 127.

eventThresholdRsrqNr

integer

C

0..1

This IE shall be present if available.

When present, this IE shall indicate the Event Threshold for RSRQ in NR.

Minimum = 0. Maximum = 127.

collectionPeriodRmmLte

CollectionPeriodRmmLteMdt

C

0..1

This IE shall be present if available.

When present, it shall contain the collection period that should be used to collect available measurement samples in case of RRM configured measurements.

collectionPeriodRmmNr

CollectionPeriodRmmNrMdt

C

0..1

This IE shall be present if available.

When present, it shall contain the collection period that should be used to collect available measurement samples in case of RRM configured measurements when UE is in NR.

measurementPeriodLte

MeasurementPeriodLteMdt

C

0..1

This IE shall be present if available.

When present, it shall contain the measurement period that should be used for the Data Volume and Scheduled IP Throughput measurements in LTE.

areaScope

AreaScope

O

0..1

When present, this IE shall contain the area in Cells or Tracking Areas where the MDT data collection shall take place, see 3GPP TS 32.422 [30].

positioningMethod

PositioningMethodMdt

O

0..1

When present, it shall indicate the positioning method that shall be used for the MDT job in LTE.

addPositioningMethodList

array(PositioningMethodMdt)

O

1..N

This IE may be present if positioningMethod IE is present.

When present, it shall indicate a list of the additional positioning methods that shall be used for the MDT job

mdtAllowedPlmnIdList

array(PlmnId)

O

1..16

When present, this IE shall contain the PLMNs related to MDT.

sensorMeasurementList

array(SensorMeasurement)

C

1..N

This IE shall be present if available.

When present, this IE shall include a list the sensor measurements to be collected for UE in NR if they are available.

n2Pc5Pol

N2InfoContent

C

0..1

This IE shall be present if N2 PC5 policy should be transferred. When present, the IE contains the NGAP V2X related IEs specified in clause 9.3.1.150 of 3GPP TS 38.413 [12].

integrityAlgorithm

EpsNasIntegrityAlgorithm

M

1

Indicates the integrity protection algorithm for EPS NAS

cipheringAlgorithm

EpsNasCipheringAlgorithm

M

1

Indicates the ciphering algorithm for EPS NAS.

ueContext

UeContext

M

1

Represents an individual ueContext resource to be relocated.

targetId

NgRanTargetId

M

1

Represents the identification of target RAN

sourceToTargetData

N2InfoContent

M

1

This IE shall be included to contain the "Source to Target Transparent Container".

forwardRelocationRequest

RefToBinaryData

M

1

This IE shall be present, and it shall contain the reference to the binary data carrying the Forward Relocation Request message (see clause 6.1.6.4).

pduSessionList

array(N2SmInformation)

C

1..N

This IE shall contain the list of N2SmInformation, where each N2SmInformation includes a PDU Session Resource Setup Request Transfer IE (see clause 9.3.4.1 of 3GPP TS 38.413 [24]) received from the SMF(s) per PDU session ID.

ueRadioCapability

N2InfoContent

C

0..1

This IE shall be included to contain the "UE Radio Capability Information" if available.

ngapCause

NgApCause

C

0..1

This IE shall be present, if available. When present, it shall represent the NGAP Cause mapped from the received S1-AP cause from the source E-UTRAN. Refer to 3GPP TS 29.010 [50] for the mapping of cause values between S1AP and NGAP.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported.

ueContext

UeContext

M

1

Represents an individual ueContext resource relocated to a new AMF.

ecModeARestricted

boolean

O

0..1

If present, indicates whether Enhanced Coverage Mode A is restricted or not.

true: Enhanced Coverage Mode A is restricted.

false or absent: Enhanced Coverage Mode A is not restricted.

ecModeBRestricted

boolean

M

1

This IE indicates whether Enhanced Coverage Mode B is restricted or not.

true: Enhanced Coverage Mode B is restricted.

false: Enhanced Coverage Mode B is not restricted.

AmfEventSubscription

1

AMF event subscription

AmfEventSubscriptionAddInfo

1

Additional information for the AMF event subscription, e.g. Binding Indications, NF type of the NF that created the subscription.

bindingInfo

array(string)

O

1..2

Binding indications received for event notifications (i.e. with "callback" scope) or for subscription change event notifications (i.e. with "subscription-events" scope) for an AMF event subscription.

When present, entries of the array shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

Example of an array entry: "bl= nf-set; nfset=set1.udmset.5gc.mnc012.mcc345; servname=nudm-ee;scope=subscription-events"

subscribingNfType

NFType

C

0..1

This IE should be present if the information is available. When present, it shall contain the NF type of the NF that created the subscription.

(NOTE X)

eventSyncInd

boolean

C

0..1

This IE should be present with value "true" when the event subscription shall be synchronized with UDM during EPS to 5GS mobility registration procedure, as specified in clause 5.3.2.4.2.

When present, this IE shall be set as following:

– true: the event subscription shall be synchronized with UDM.

– false: the event subscription shall not be synchronized with UDM.

nfConsumerInfo

array(string)

C

1..N

When present, this IE shall contain the NF Service Consumer information received together with the AMF event subscription and entries of the array shall be set to the value of the 3gpp-Sbi-Consumer-Info header defined in clause 5.2.3.3.7 of 3GPP TS 29.500 [4], without the header name.

aoiStateList

map(AreaOfInterestEventState)

O

1..N

Map of subscribed Area of Interest (AoI) Event State in the old AMF.

For the subscribed AoI Event(s), the JSON pointer to an AmfEventArea element in the areaList IE (or a PresenceInfo element in presenceInfoList IE) of the AmfEvent data type (see clause 6.2.6.2.3) shall be the key of the map.

(NOTE 2)

NOTE 1: In scenarios where an "intermediate NF" (e.g. UDM) creates a subscription on behalf of a "source NF" (e.g. NEF), this IE shall contain the NF type of the "intermediate NF". The NF type of the "source NF" may be available in the AmfEventSubscription.

NOTE 2: The new AMF may use the information to determine whether the UE presence state in the AOI(s) has changed, thus should be reported to the NF consumer.

supi

Supi

C

0..1

This IE shall be present if the UE is emergency registered and the SUPI is not authenticated.

relocationCancelRequest

RefToBinaryData

M

1

This IE shall be present, and it shall contain the reference to the binary data carrying the GTP-C Relocation Cancel Request message (see clause 6.1.6.4).

periodicComInd

PeriodicCommunicationIndicator

O

0..1

This IE indicates whether the UE communicates periodically or not, e.g. only on demand.

periodicTime

DurationSec

O

0..1

This IE indicates the interval time of periodic communication (see TS 23.502 [3] clause 4.15.6.3).

scheduledComTime

ScheduledCommunicationTime

O

0..1

This IE indicates time and day of the week when the UE is available for communication (see TS 23.502 [3] clause 4.15.6.3).

stationaryInd

StationaryIndication

O

0..1

This IE indicates whether the UE is stationary or mobile (see TS 23.502 [3] clause 4.15.6.3).

trafficProfile

TrafficProfile

O

0..1

This IE indicates the type of data transmission: single packet transmission (UL or DL), dual packet transmission (UL with subsequent DL or DL with subsequent UL), multiple packets transmission

batteryInd

BatteryIndication

O

0..1

This IE indicates the power consumption type(s) of the UE (see TS 23.502 [3] clause 4.15.6.3).

validityTime

DateTime

O

0..1

When present, this IE identifies when the expected UE behaviour parameters expire and shall be deleted locally if it expire (see TS 23.502 [3] clause 4.15.6.3).

When absent, no expiry for the expected UE behaviour parameters applies.

ceModeBSupportInd

boolean

M

1

This IE shall contain the CE-mode-B Support Indicator (See 3GPP TS 38.413 [12], clause 9.3.1.156).

This IE shall be set as follows:

– true: CE-mode-B is supported;

– false: CE-mode-B is not supported.

lteCatMInd

boolean

M

1

This IE shall contain the LTE-M Indication (See 3GPP TS 38.413 [12], clause 9.3.1.157).

This IE shall be set as follows:

– true: LTE-M is indicated by the UE;

– false: LTE-M is not indicated by the UE.

cellCagInfo

array(CagId)

O

1..N

This IE shall contain the CAG List of the CAG cell.

directDiscovery

UeAuth

C

0..1

This IE shall be present if the UE is authorized to use the NR sidelink for the ProSe Direct Discovery service.

directComm

UeAuth

C

0..1

This IE shall be present if the UE is authorized to use the NR sidelink for the ProSe Direct Communication service.

l2Relay

UeAuth

C

0..1

This IE shall be present if the UE is authorized to act as a Layer-2 ProSe UE-to-Network Relay for the ProSe service.

l3Relay

UeAuth

C

0..1

This IE shall be present if the UE is authorized to act as a Layer-3 ProSe UE-to-Network Relay for the ProSe service.

l2Remote

UeAuth

C

0..1

This IE shall be present if the UE is authorized to act as a Layer-2 Remote UE for the ProSe service.

nrUePc5Ambr

BitRate

C

0..1

This IE shall be present if the UE is authorized to use the NR sidelink for the ProSe services.

When present, this IE contains the ProSe NR UE-PC5-AMBR.

pc5QoSPara

Pc5QoSPara

C

0..1

This IE shall be present if the UE is authorized to use the NR sidelink for the ProSe services.

When present, this IE contains policy data on the PC5 QoS parameters for the ProSe services on the NR sidelink.

nwdafId

NfInstanceId

C

0..1

This IE shall be present, if available.

When present, this IE shall contain the NF Instance ID of the NWDAF.

(NOTE).

nwdafSetId

NfSetId

C

0..1

This IE shall be present, if available.

When present, this IE shall contain the NF Set ID of the NWDAF.

(NOTE).

nwdafSubscriptionList

array(NwdafSubscription)

M

1..N

List of NWDAF subscriptions identified by subscription Id.

NOTE: At least one nwdafId or nwdafSetId shall be included.

nwdafEvtSubsServiceUri

Uri

M

1

It identifies the resource URI of the individual NWDAF subscription.

nwdafEventsSubscription

NnwdafEventsSubscription

M

1

The created Individual NWDAF Event Subscription resource

updpNotifySubscriptionId

string

M

1

Represents the Id created by the AMF for the subscription to notify a UE policy delivery related N1 information.

updpNotifyCallbackUri

Uri

M

1

This IE represents the callback URI on which the UE policy delivery related N1 message shall be notified.

supportedFeatures

SupportedFeatures

C

0..1

This IE shall be present if at least one optional feature defined in clause 6.1.8 is supported by the NF service consumer.

updpCallbackBinding

string

C

0..1

This IE shall be present if Binding Indication was received for the PCF for the callback URI.

When present, this IE shall contain the Binding indication of callback URI and shall be set to the value of the 3gpp-Sbi-Binding header defined in clause 5.2.3.2.6 of 3GPP TS 29.500 [4], without the header name.

n2Pc5ProSePol

N2InfoContent

M

0..1

This attribute contains the N2 PC5 policy for 5G ProSe. This IE contains the NGAP ProSe related IEs specified in clause 9.3.1.234 of 3GPP TS 38.413 [12].

releaseSessionList

array(PduSessionId)

M

1..N

This IE shall include the PDU session Id(s) to be released.

releaseCause

ReleaseCause

M

1

This IE shall include the cause to release the PDU session(s).

presence

PresenceState

M

1

This IE shall contain the UE presence state for the indicated area of interest.

individualPraIdList

array(string)

C

1..N

This IE shall be present if the indicated area of interest referring to a set of Core Network predefined Presence Reporting Areas and the UE is in at least one individual PRA within the set of Core Network predefined Presence Reporting Areas.

When present, this IE shall contain the PRA Identifier of the individual PRA(s) where the UE is located.

EpsBearerId

integer

Integer identifying an EPS bearer, within the range 0 to 15, as specified in clause 11.2.3.1.5, bits 5 to 8, of 3GPP TS 24.007 [15].

Ppi

integer

This represents the Paging Policy Indicator. The value is within the range 0 to 7.

NasCount

Uinteger

Unsigned integer identifying the NAS COUNT as specified in 3GPP TS 33.501 [27]

5GMmCapability

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the "5GMM capability" IE as specified in clause 9.11.3.1 of 3GPP TS 24.501 [11] (starting from octet 1).

UeSecurityCapability

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the " UE security capability" IE as specified in clause 9.11.3.54 of 3GPP TS 24.501 [11] (starting from octet 1).

S1UeNetworkCapability

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the " S1 UE network capability" IE as specified in clause 9.11.3.48 of 3GPP TS 24.501 [11] (starting from octet 1).

DrxParameter

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the "5GS DRX Parameters" IE as specified in clause 9.11.3.2A of 3GPP TS 24.501 [11] (starting from octet 1).

OmcIdentifier

string

The OMC Identifier indicates the identity of an Operation and Maintenance Centre to which Trace Records shall be sent.

minLength: 1

maxLength: 20

MSClassmark2

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the Mobile Station Classmark 2 as specified in clause 9.11.3.31C of 3GPP TS 24.501 [11]) (starting from octet 1).

SupportedCodec

Bytes

String with format "byte" as defined in OpenAPI Specification [23], i.e. base64-encoded characters, encoding the Supported Codec as specified in clause 9.11.3.51A of 3GPP TS 24.501 [11]) (starting from octet 1).

"AMF_UNAVAILABLE"

The AMF is unavailable to serve the UEs identified by the GUAMI(s).

"AMF_AVAILABLE"

The AMF is available to serve the UEs identified by the GUAMI(s).

"SM"

N2 SM information.

"NRPPa"

N2 NRPPa information.

"PWS"

N2 PWS information of PWS type.

"PWS-BCAL"