E.8 Wireline non-3GPP Access Network Information

29.2143GPPPolicy and charging control over Rx reference pointRelease 17TS

The PCF provides the AF with the wireline access network information as described in clause 4.4.1, with the following differences:

– The RAT-Type AVP shall be set to "WIRELINE", "WIRELINE_CABLE" or "WIRELINE_BBF" according to the received "ratType" attribute.

If the NetLoc-Wireline is supported, the procedure described in clauses 4.4.4 and 4.4.6.7 shall apply with the exceptions specified in clause E.1 and the exception of the user location information that is encoded as follows:

– The wireline location is encoded in the Wireline-User-Location-Info AVP, where:

a) The HFC Node Identifer received over NGAP in the "hfcNodeId" attribute of the "n3gaLocation", if available, is encoded in the HFC-Node-Identifier AVP.

b) The Global Line Identifier in the "gli" attribute of the "n3gaLocation", if available, is encoded in the GLI-Identifier AVP.

c) The type of wireline access in the "w5gbanLineType" attribute of the "n3gaLocation", if available, is encoded in the Line-Type AVP.