7.7.80 MS Info Change Reporting Action
29.0603GPPGeneral Packet Radio Service (GPRS)GPRS Tunnelling Protocol (GTP) across the Gn and Gp interfaceRelease 17TS
The MS Info Change Reporting Action IE is used by the GGSN to enable and disable the MS Info Change Reporting mechanism. For more information on this feature, see clause 7.5B.1.
The structure of the MS Info Change Reporting Action IE is as follows:
|
Bits |
||||||||||
|
Octets |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
||
|
1 |
Type = 181 (Decimal) |
|||||||||
|
2-3 |
1 (Decimal) |
|||||||||
|
4 |
Action |
|||||||||
Figure 7.7.80.1: Restriction Type Information Element
The Action field contains an unsigned number, whose values indicate the following:
Table 7.7.80.1: Action values
|
Action |
Value (Decimal) |
|
Stop Reporting |
0 |
|
Start Reporting CGI/SAI |
1 |
|
Start Reporting RAI |
2 |
|
<spare> |
3-255 |
If the Action field contains a value not defined in the above table, then the receiving entity shall always silently discard the IE and shall not change the state of the MS Info Change Reporting meachanism.