B.8 Network measurement job termination

28.5503GPPManagement and orchestrationPerformance assuranceRelease 18TS

This Figure B.8-1 illustrates an example of procedure for stopping a measurement job for network/subnetwork(s).

This procedure is only applicable for the scenario where the network/subnetwork measurement type(s) can be decomposed into the measurement data type(s) of the constituent NF(s).

Figure B.8-1: Example of procedure for network measurement job creation

1a. The authorized consumer invokes the StopMeasurementJob operation (see clause 6.1.2) to network measurement job control service producer to request termination of a measurement job for network/subnetwork(s).

1b. The network measurement job control service producer returns the result of StopMeasurementJob operation (see clause 6.1.2) to the consumer.

2. The network measurement job control service producer checks if the measurement job(s) for the constituent NF(s) need to be stopped.

3. For each measurement job for the constituent NF(s) needs to be stopped, the network measurement job control service producer acts as consumer of NF measurement job control service, and requests the corresponding NF measurement job control service producer to terminate the measurement job for the NF(s) (according to the NF measurement job termination procedure as illustrated in clause B.5).

Annex C (normative):
Performance Data Stream Unit content description

Table C-1 lists all the Performance Data Stream Unit content items. It also provides an explanation of the individual items.

Table C-1: Performance Data Stream Unit content description

Performance Data Stream Unit Content	Description
streamId	The streamId of the performance data stream.
granularityPeriodEndTime	Time stamp referring to the end of the granularity period.
measResults	This parameter contains the sequence of result values for the observed measurement types or KPIs. The "measResults" sequence shall have the same number of elements, which follow the same order as the measurement types or KPIs presented in “performanceMetrics” for the subject stream in the input parameter streamInfoList of the establishStreamingConnection operation (see clause 6.2.1.2).

Annex D (informative):
Performance data streaming holistic sequence