Message Type

M

9.2.1.40

YES

reject

Transaction ID

M

9.2.1.59

–

SRNC-ID

M

RNC-ID

9.2.1.50

If the Extended SRNC-ID IE is included in the message, the SRNC-ID IE shall be ignored.

YES

reject

S-RNTI

M

9.2.1.53

If the Extended S-RNTI IE is included in the message, the S-RNTI IE shall be ignored.

YES

reject

D-RNTI

O

9.2.1.24

YES

reject

Allowed Queuing Time

O

9.2.1.2

YES

reject

UL DPCH Information

1

YES

reject

>UL Scrambling Code

M

9.2.2.53

–

>Min UL Channelisation Code Length

M

9.2.2.25

–

>Max Number of UL DPDCHs

C – CodeLen

9.2.2.24

–

>Puncture Limit

M

9.2.1.46

For the UL.

–

>TFCS

M

9.2.1.63

–

>UL DPCCH Slot Format

M

9.2.2.52

–

>Uplink SIR Target

O

Uplink SIR

9.2.1.69

–

>Diversity Mode

M

9.2.2.8

–

>Not Used

O

NULL

–

>Not Used

O

NULL

–

>DPC Mode

O

9.2.2.12A

YES

reject

>UL DPDCH Indicator for E-DCH operation

O

9.2.2.52A

This IE may be present without the presence of the E-DPCH Information IE.

YES

reject

DL DPCH Information

0..1

YES

reject

>TFCS

M

9.2.1.63

–

>DL DPCH Slot Format

M

9.2.2.9

–

>Number of DL Channelisation Codes

M

9.2.2.26A

–

>TFCI Signalling Mode

M

9.2.2.46

–

>TFCI Presence

C- SlotFormat

9.2.1.55

–

>Multiplexing Position

M

9.2.2.26

–

>Power Offset Information

1

–

>>PO1

M

Power Offset

9.2.2.30

Power offset for the TFCI bits.

–

>>PO2

M

Power Offset

9.2.2.30

Power offset for the TPC bits.

–

>>PO3

M

Power Offset

9.2.2.30

Power offset for the pilot bits.

–

>FDD TPC Downlink Step Size

M

9.2.2.16

–

>Limited Power Increase

M

9.2.2.21A

–

>Inner Loop DL PC Status

M

9.2.2.21a

–

DCH Information

M

DCH FDD Information

9.2.2.4A

YES

reject

RL Information

1..<maxNrOfRLs>

EACH

notify

>RL ID

M

9.2.1.49

–

>C-ID

M

9.2.1.6

–

>First RLS Indicator

M

9.2.2.16A

–

>Frame Offset

M

9.2.1.30

–

>Chip Offset

M

9.2.2.1

–

>Propagation Delay

O

9.2.2.33

–

>Diversity Control Field

C – NotFirstRL

9.2.1.20

–

>Initial DL TX Power

O

DL Power

9.2.1.21A

–

>Primary CPICH Ec/No

O

9.2.2.32

–

>Not Used

O

NULL

–

>Transmit Diversity Indicator

C –

Diversity mode

9.2.2.48

–

>Enhanced Primary CPICH Ec/No

O

9.2.2.13I

YES

ignore

>RL Specific DCH Information

O

9.2.1.49A

YES

ignore

>Delayed Activation

O

9.2.1.19Aa

YES

reject

>Cell Portion ID

O

9.2.2.E

YES

ignore

>RL Specific E-DCH Information

O

9.2.2.35a

YES

reject

>E-DCH RL Indication

O

9.2.2.4E

YES

reject

>Extended Propagation Delay

O

9.2.2.33a

YES

ignore

>Synchronisation Indicator

O

9.2.2.45A

YES

reject

>HS-DSCH Preconfiguration Setup

O

9.2.2.100

YES

ignore

>Non-Serving RL Preconfiguration Setup

O

9.2.2.124

YES

ignore

>F-TPICH Information

O

9.2.2.139

YES

ignore

>TPC slot position

O

9.2.2.193

YES

ignore

Transmission Gap Pattern Sequence Information

O

9.2.2.47A

YES

reject

Active Pattern Sequence Information

O

9.2.2.A

YES

reject

Permanent NAS UE Identity

O

9.2.1.73

YES

ignore

DL Power Balancing Information

O

9.2.2.10A

YES

ignore

HS-DSCH Information

O

HS-DSCH FDD Information

9.2.2.19a

YES

reject

HS-PDSCH RL ID

C – InfoHSDSCH

RL ID 9.2.1.49

YES

reject

MBMS Bearer Service List

0..<maxNrOfMBMSServices>

GLOBAL

notify

>TMGI

M

9.2.1.80

–

E-DPCH Information

0..1

YES

reject

>Maximum Set of E-DPDCHs

M

9.2.2.24e

–

>Puncture Limit

M

9.2.1.46

–

>E-TFCS Information

M

9.2.2.4G

–

>E-TTI

M

9.2.2.4J

–

>E-DPCCH Power Offset

M

9.2.2.4K

–

>E-RGCH 2-Index-Step Threshold

M

9.2.2.64

–

>E-RGCH 3-Index-Step Threshold

M

9.2.2.65

–

>HARQ Info for E-DCH

M

9.2.2.66

–

>HS-DSCH Configured Indicator

M

9.2.2.19C

–

>Minimum Reduced E-DPDCH Gain Factor

O

9.2.2.102

YES

ignore

E-DCH FDD Information

C-EDCHInfo

9.2.2.4B

YES

reject

Serving E-DCH RL

O

9.2.2.38C

YES

reject

F-DPCH Information

0..1

YES

reject

>Power Offset Information

1

–

>>PO2

M

Power Offset

9.2.2.30

This IE shall be ignored by DRNS.

_

>FDD TPC Downlink Step Size

M

9.2.2.16

–

>Limited Power Increase

M

9.2.2.21A

–

>Inner Loop DL PC Status

M

9.2.2.21a

–

>F-DPCH Slot Format Support Request

O

9.2.2.86

YES

reject

>F-DPCH Slot Format

O

9.2.2.85

YES

ignore

Initial DL DPCH Timing Adjustment Allowed

O

9.2.2.21b

YES

ignore

DCH Indicator For E-DCH-HSDPA Operation

O

9.2.2.67

YES

reject

Serving Cell Change CFN

O

CFN

9.2.1.9

YES

reject

Continuous Packet Connectivity DTX-DRX Information

O

9.2.2.72

YES

reject

Continuous Packet Connectivity HS-SCCH less Information

O

9.2.2.74

YES

reject

Extended SRNC-ID

O

Extended RNC-ID

9.2.1.50a

The Extended SRNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Additional HS Cell Information RL Setup

0..<maxNrOfHSDSCH-1>

For secondary serving HS-DSCH cell. Max 7 in this 3GPP release.

EACH

reject

>HS-PDSCH RL ID

M

RL ID 9.2.1.49

–

>C-ID

M

9.2.1.6

–

>HS-DSCH FDD Secondary Serving Information

M

9.2.2.19aa

–

UE Aggregate Maximum Bit Rate

O

9.2.1.137

YES

ignore

Additional E-DCH Cell Information RL Setup Req

0..1

For E-DCH on multiple frequencies in this DRNS.

YES

reject

>Multicell E-DCH Transport Bearer Mode

M

9.2.2.113

–

>Additional E-DCH Cell Information Setup

1..<maxNrOfEDCH-1>

E-DCH on Secondary uplink frequency – max 1 in this 3GPP release.

–

>>Additional E-DCH FDD Setup Information

M

9.2.2.110

–

Usefulness of Battery Optimization

O

9.2.2.127

YES

ignore

UL CLTD Information

O

9.2.2.131

YES

reject

Extended S-RNTI

O

Extended RNTI

9.2.1.154

The Extended S-RNTI IE shall be used if the S-RNTI identity has a value larger than 1048575.

YES

reject

E-DCH Decoupling Indication

O

9.2.2.169

YES

reject

DCH Enhancements Information

O

9.2.2.171

YES

reject

Radio Links without DPCH/F-DPCH Indication

O

9.2.2.176

YES

reject

UL DPCCH2 Information

O

9.2.2.178

YES

reject

Selected PLMN Identity

O

PLMN Identity

9.2.2.189

YES

ignore

Downlink TPC enhancements Information

O

9.2.2.190

YES

reject

CodeLen

The IE shall be present if Min UL Channelisation Code length IE equals to 4.

SlotFormat

The IE shall be present if the DL DPCH Slot Format IE is equal to any of the values from 12 to 16.

NotFirstRL

The IE shall be present if the RL is not the first one in the RL Information IE.

Diversity mode

The IE shall be present if Diversity Mode IE in UL DPCH Information IE is not equal to “none”.

InfoHSDSCH

This IE shall be present if HS-DSCH Information IE is present.

EDCHInfo

This IE shall be present if E-DPCH Information IE is present.

maxNrOfRLs

Maximum number of RLs for one UE.

maxNrOfMBMSServices

Maximum number of MBMS bearer services that a UE can join.

maxNrOfHSDSCH-1

Maximum number of Secondary Serving HS-DSCH cells for one UE.

maxNrOfEDCH-1

Maximum number of uplink frequencies -1 for E-DCH for one UE.

Message Type

M

9.2.1.40

YES

reject

Transaction ID

M

9.2.1.59

–

SRNC-ID

M

RNC-ID

9.2.1.50

If the Extended SRNC-ID IE is included in the message, the SRNC-ID IE shall be ignored.

YES

reject

S-RNTI

M

9.2.1.53

If the Extended S-RNTI IE is included in the message, the S-RNTI IE shall be ignored.

YES

reject

D-RNTI

O

9.2.1.24

YES

reject

UL Physical Channel Information

1

YES

reject

>Maximum Number of Timeslots

M

9.2.3.3A

For the UL.

–

>Minimum Spreading Factor

M

9.2.3.4A

For the UL.

–

>Maximum Number of UL Physical Channels per Timeslot

M

9.2.3.3B

–

>Support of 8PSK

O

9.2.3.7H

Applicable to 1.28Mcps TDD only.

YES

ignore

>Minimum Spreading Factor 7.68Mcps

O

9.2.3.19

Applicable to 7.68Mcps TDD only.

YES

ignore

DL Physical Channel Information

1

YES

reject

>Maximum Number of Timeslots

M

9.2.3.3A

For the DL.

–

>Minimum Spreading Factor

M

9.2.3.4A

For the DL.

–

>Maximum Number of DL Physical Channels

M

9.2.3.3C

–

>Maximum Number of DL Physical Channels per Timeslot

O

9.2.3.3D

YES

ignore

>Support of 8PSK

O

9.2.3.7H

Applicable to 1.28Mcps TDD only.

YES

ignore

>Support of PLCCH

O

9.2.3.16

Applicable to 1.28Mcps TDD only.

YES

ignore

>Minimum Spreading Factor 7.68Mcps

O

9.2.3.19

Applicable to 7.68Mcps TDD only.

YES

ignore

>Maximum Number of DL Physical Channels 7.68Mcps

O

9.2.3.20

Applicable to 7.68Mcps TDD only.

YES

ignore

>Maximum Number of DL Physical Channels per Timeslot 7.68Mcps

O

9.2.3.21

Applicable to 7.68Mcps TDD only.

YES

ignore

Allowed Queuing Time

O

9.2.1.2

YES

reject

UL CCTrCH Information

0..<maxNrOfCCTrCHs>

For DCH and USCH

EACH

notify

>CCTrCH ID

M

9.2.3.2

–

>TFCS

M

9.2.1.63

For the UL.

–

>TFCI Coding

M

9.2.3.11

–

>Puncture Limit

M

9.2.1.46

–

>TDD TPC Uplink Step Size

O

9.2.3.10a

Mandatory for 1.28Mcps TDD, not applicable to 3.84Mcps TDD or 7.68Mcps TDD.

YES

reject

DL CCTrCH Information

0..<maxNrOfCCTrCHs>

For DCH and DSCH.

EACH

notify

>CCTrCH ID

M

9.2.3.2

–

>TFCS

M

9.2.1.63

For the DL.

–

>TFCI Coding

M

9.2.3.11

–

>Puncture Limit

M

9.2.1.46

–

>TDD TPC Downlink Step Size

M

9.2.3.10

–

>TPC CCTrCH List

0..<maxnoCCTrCHs>

List of uplink CCTrCH which provide TPC.

–

>>TPC CCTrCH ID

M

CCTrCH ID

9.2.3.2

–

DCH Information

O

DCH TDD Information

9.2.3.2A

YES

reject

DSCH Information

O

DSCH TDD Information

9.2.3.3a

YES

reject

USCH Information

O

9.2.3.14

YES

reject

RL Information

1

YES

reject

>RL ID

M

9.2.1.49

–

>C-ID

M

9.2.1.6

–

>Frame Offset

M

9.2.1.30

–

>Special Burst Scheduling

M

9.2.3.7D

–

>Primary CCPCH RSCP

O

9.2.3.5

–

>DL Time Slot ISCP Info

O

9.2.3.2D

Applicable to 3.84Mcps TDD and 7.68Mcps TDD only.

–

>DL Time Slot ISCP Info LCR

O

9.2.3.2F

Applicable to 1.28Mcps TDD only.

YES

reject

>TSTD Support Indicator

O

9.2.3.13F

Applicable to 1.28Mcps TDD only.

YES

ignore

>RL Specific DCH Information

O

9.2.1.49A

YES

ignore

>Delayed Activation

O

9.2.1.19Aa

YES

reject

>UL Synchronisation Parameters LCR

0..1

Mandatory for 1.28Mcps TDD. Not Applicable to 3.84Mcps TDD or 7.68Mcps TDD.

YES

reject

>>Uplink Synchronisation Step Size

M

9.2.3.13J

–

>>Uplink Synchronisation Frequency

M

9.2.3.13I

–

>Primary CCPCH RSCP Delta

O

9.2.3.5a

YES

ignore

>Idle Interval Configuration Indicator

O

NULL

TDD only.

YES

ignore

>Cell Portion LCR ID

O

9.2.3.73

Applicable to 1.28Mcps TDD only.

YES

ignore

Permanent NAS UE Identity

O

9.2.1.73

YES

ignore

HS-DSCH Information

O

HS-DSCH TDD Information 9.2.3.3aa

YES

reject

HS-PDSCH RL ID

C – InfoHSDSCH

RL ID 9.2.1.49

YES

reject

PDSCH-RL-ID

O

RL ID

9.2.1.49

YES

ignore

MBMS Bearer Service List

0..<maxNrOfMBMSServices>

GLOBAL

notify

>TMGI

M

9.2.1.80

–

E-DCH Information

0..1

3.84Mcps TDD only.

YES

reject

>E-PUCH Information

M

9.2.3.36

–

>E-TFCS Information TDD

M

9.2.3.37

–

>E-DCH MAC-d Flows Information TDD

M

9.2.3.38

–

>E-DCH TDD Information

M

9.2.3.40

–

E-DCH Serving RL

O

RL ID

9.2.1.49

TDD only.

YES

reject

E-DCH Information 7.68Mcps

0..1

7.68Mcps TDD only.

YES

reject

>E-PUCH Information

M

9.2.3.36

–

>E-TFCS Information TDD

M

9.2.3.37

–

>E-DCH MAC-d Flows Information TDD

M

9.2.3.38

–

>E-DCH TDD Information 7.68Mcps

M

9.2.3.51

–

E-DCH Information 1.28Mcps

0..1

1.28Mcps TDD only.

YES

reject

>E-PUCH Information LCR

M

9.2.3.36a

–

>E-TFCS Information TDD

M

9.2.3.37

–

>E-DCH MAC-d Flows Information TDD

M

9.2.3.38

–

>E-DCH TDD Information LCR

M

9.2.3.40a

–

Extended SRNC-ID

O

Extended RNC-ID

9.2.1.50a

The Extended SRNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Continuous Packet Connectivity DRX Information LCR

O

9.2.3.61

1.28 Mcps TDD only.

YES

reject

HS-DSCH Semi-Persistent scheduling Information LCR

O

9.2.3.64

1.28 Mcps TDD only.

YES

reject

E-DCH Semi-Persistent scheduling Information LCR

O

9.2.3.66

1.28 Mcps TDD only.

YES

reject

RNTI Allocation Indicator

O

ENUMERATED (True)

1.28 Mcps TDD only.

YES

ignore

DCH Measurement Type Indicator

O

9.2.3.76

1.28 Mcps TDD only.

YES

reject

Multi-Carrier E-DCH Information

0..1

Applicable for Multi-Carrier E-DCH Operation in 1.28 Mcps TDD only.

YES

reject

>Multi-Carrier E-DCH Transport Bearer Mode LCR

M

9.2.3.79

1.28 Mcps TDD only.

–

>Multi-Carrier E-DCH Information LCR

M

9.2.3.77

1.28 Mcps TDD only.

–

MU-MIMO Indicator

O

9.2.3.82

1.28 Mcps TDD only.

YES

reject

Extended S-RNTI

O

Extended RNTI

9.2.1.154

The Extended S-RNTI IE shall be used if the S-RNTI identity has a value larger than 1048575.

YES

reject

UE support of non-rectangular resource allocation

O

ENUMERATED (support)

1.28 Mcps TDD only.

The absence of this IE indicates that the UE does not support the non-rectangular resource allocation.

YES

ignore

InfoHSDSCH

This IE shall be present if HS-DSCH Information IE is present.

maxNrOfCCTrCHs

Maximum number of CCTrCH for one UE.

maxNrOfMBMSServices

Maximum number of MBMS bearer services that a UE can join.