Choice Permanent NAS UE Identity

>IMSI

>>IMSI

OCTET STRING (SIZE (3..8))

– digits 0 to 9, encoded 0000 to 1001,

– 1111 used as filler digit,

two digits per octet,

– bit 4 to 1 of octet n encoding digit 2n-1,

– bit 8 to 5 of octet n encoding digit 2n.

– Number of decimal digits shall be from 6 to 15 starting with the digits from the PLMN identity.

When the IMSI is made of an odd number of digits, the filler digit shall be added at the end to make an even number of digits of length 2N. The filler digit shall then be consequently encoded as bit 8 to 5 of octet N.

Choice Temporary UE ID

>TMSI

>>TMSI

M

OCTET STRING (SIZE(4))

>P-TMSI

>>P-TMSI

M

OCTET STRING (SIZE(4))

Paging Cause

M

ENUMERATED( Terminating Conversational Call, Terminating Streaming Call, Terminating Interactive Call, Terminating Background Call,

Terminating Low Priority Signalling,

…,

Terminating High Priority Signalling)

NAS PDU

M

OCTET STRING

PLMN identity

M

9.2.3.55

LAC

M

OCTET STRING (SIZE(2))

0000 and FFFE not allowed.

RAC

M

OCTET STRING (SIZE(1))

SAPI

M

ENUMERATED (SAPI 0, SAPI 3, …)

PLMN identity

M

9.2.3.55

LAC

M

OCTET STRING (SIZE(2))

0000 and FFFE not allowed.

SAC

M

OCTET STRING (SIZE(2))

Choice Area Identity

>SAI

>>SAI

M

9.2.3.9

>Geo

>>Geographical Area

M

9.2.3.11

Choice Geographical Area

>Point

>>Point

M

See below

Ellipsoid point.

>Point With Uncertainty

>>Point With Uncertainty

M

See below

Ellipsoid point with uncertainty circle.

>Polygon

>>Polygon

M

See below

List of Ellipsoid points.

>Ellipsoid point with uncertainty Ellipse

>>Ellipsoid point with uncertainty Ellipse

M

See below

Ellipsoid point with uncertainty Ellipse.

>Ellipsoid point with altitude

>>Ellipsoid point with altitude

M

See below

Ellipsoid point with altitude.

>Ellipsoid point with altitude and uncertainty Ellipsoid

>>Ellipsoid point with altitude and uncertainty Ellipsoid

M

See below

Ellipsoid point with altitude and uncertainty Ellipsoid.

>Ellipsoid Arc

>>Ellipsoid Arc

M

See below

Ellipsoid Arc.

Point

>Geographical Coordinates

M

See below

Point With Uncertainty

>Geographical Coordinates

M

See below

>Uncertainty Code

M

INTEGER
(0..127)

The uncertainty "r" is derived from the "uncertainty code" k by

r = 10x(1.1^k-1).

Polygon

>Geographical Coordinates

M

1 to <maxnoofPoints>

See below

maxnoofPoints

Maximum no. of points in polygon. Value is 15.

Ellipsoid point with uncertainty Ellipse

>Geographical Coordinates

M

See below

>Uncertainty Ellipse

M

See below

>Confidence

M

INTEGER
(0..127)

Ellipsoid point with altitude

>Geographical Coordinates

M

See below

>Altitude and direction

M

See below

Ellipsoid point with altitude and uncertainty Ellipsoid

>Geographical Coordinates

M

See below

>Altitude and direction

M

See below

>Uncertainty Ellipse

M

See below

>Uncertainty Altitude

M

INTEGER
(0..127)

>Confidence

M

INTEGER
(0..127)

Ellipsoid Arc

>Geographical Coordinates

M

See below

>Inner radius

M

INTEGER
(0..2¹⁶-1)

The relation between the value (N) and the radius (r) in meters it describes is 5N r <5(N+1), except for N=2¹⁶-1 for which the range is extended to include all grater values of (r).

>Uncertainty radius

M

INTEGER
(0..127)

The uncertainty "r" is derived from the "uncertainty code" k by

r = 10x(1.1^k-1).

>Offset angle

M

INTEGER
(0..179)

The relation between the value (N) and the angle (a) in degrees it describes is
2N a <2(N+1).

>Included angle

M

INTEGER
(0..179)

The relation between the value (N) and the angle (a) in degrees it describes is
2N< a 2(N+1).

>Confidence

M

INTEGER
(0..127)

Geographical Coordinates

>Latitude Sign

M

ENUMERATED (North, South)

>Degrees Of Latitude

M

INTEGER (

0..2²³-1)

The IE value (N) is derived by this formula:

N2²³ X /90  N+1

X being the latitude in degree (0°.. 90°).

>Degrees Of Longitude

M

INTEGER (

-2²³..2²³-1)

The IE value (N) is derived by this formula:

N2²⁴ X /360  N+1

X being the longitude in degree (-180°..+180°).

Uncertainty Ellipse

>Uncertainty semi-major

M

INTEGER
(0..127)

The uncertainty "r" is derived from the "uncertainty code" k by

r = 10x(1.1^k-1).

>Uncertainty semi-minor

M

INTEGER
(0..127)

The uncertainty "r" is derived from the "uncertainty code" k by

r = 10x(1.1^k-1).

>Orientation of major axis

M

INTEGER
(0..179)

The relation between the IE value (N) and the angle (a) in degrees it describes is
2N a <2(N+1). The values 90..179 shall not be used.

Altitude and direction

>Direction of Altitude

M

ENUMERATED (Height, Depth)

>Altitude

M

INTEGER
(0..2¹⁵-1)

The relation between the value (N) and the altitude (a) in meters it describes is N a <N+1, except for N=2¹⁵-1 for which the range is extended to include all grater values of (a).

Unsuccessfully Transmitted Data Volume

M

INTEGER (0..2³²-1)

Unit is octet.

Data Volume Reference

M

INTEGER (0..255)

NAS Synchronisation Indicator

M

BIT STRING (SIZE(4))

The coding of this IE, transparent for RNC, is described in the subclause "Speech Codec Selection" of TS 24.008 [8].

Requested Location Related Data Type

M

ENUMERATED(Deciphering Keys for UE Based OTDOA,

Deciphering Keys for Assisted GPS,

Dedicated Assistance Data for UE Based OTDOA,

Dedicated Assistance Data for Assisted GPS,

…,

Deciphering keys for Assisted GANSS,

Dedicated Assistance Data for Assisted GANSS,

Deciphering keys for Assisted GPS and GANSS,

Dedicated Assistance Data for Assisted GPS and GANSS)

Requested GPS Assistance Data

C – ifDedAssGPS

9.2.3.21

ifDedAssGPS

This IE shall be present if the Requested Location Related Data Type IE is set to ‘Dedicated Assistance Data for Assisted GPS’ or ‘Dedicated Assistance Data for Assisted GPS and GANSS’.

Ciphering Key Flag

M

BIT STRING (SIZE(1))

Indicates the current Ciphering Key Flag that is used for the broadcast assistance data messages in the location area.

Current Deciphering key

M

BIT STRING (SIZE(56))

Current deciphering key that is used for deciphering broadcast assistance data.

Next Deciphering key

M

BIT STRING (SIZE(56))

Next deciphering key that will be used for deciphering broadcast assistance data.

Requested GPS Assistance Data

OCTET STRING (SIZE(1..38))

For the corresponding Information Element Definition see "gpsAssistanceData" TS 24.080 [22].

SAI

M

9.2.3.9

Age of SAI

M

INTEGER (0..32767)

The value represents the elapsed time in minutes since the reported last known SAI was stored by the RNC.

Value "0" shall not be used.

Value "32767" indicates that the age of SAI is at least 32767 minutes old.

PLMNs In Shared Network

1 to <maxPLMNsSN>

>PLMN identity

M

9.2.3.55

>LA List

1 to <maxLAs>

>>LAC

M

OCTET STRING (SIZE(2))

0000 and FFFE not allowed.

>>List Of SNAs Containing LA

1 to <maxSNAs>

>>>SNAC

M

9.2.3.25

maxPLMNsSN

Maximum no. of PLMNs involved in a Shared Network agreement. The value for maxPLMNsSN is 32.

maxLAs

Maximum no. of LAs in a PLMN. The value for maxLAs is 65536.

maxSNAs

Maximum no. of SNAs in a PLMN. The value for maxSNAs is 65536.

Authorised PLMNs

1 to <maxPLMNsSN>

>PLMN Identity

M

9.2.3.55

>Authorised SNAs List

O

>>Authorised SNAs

1 to <maxSNAs>

>>>SNAC

M

9.2.3.25

maxPLMNsSN

Maximum no. of PLMNs involved in a Shared Network agreement. The value for maxPLMNsSN is 32.

maxSNAs

Maximum no. of SNAs in a PLMN. The value for maxSNAs is 65536.

SNAC

M

INTEGER (0..65535)

Location Related Data Request Type Specific To GERAN Iu mode

ENUMERATED(Deciphering Keys for E-OTD,

Dedicated Mobile-Assisted E-OTD Assistance Data,

Dedicated Mobile-Based E‑OTD Assistance Data, …)

Positioning Data Discriminator

M

BIT STRING (SIZE(4))

The positioning data discriminator defines the type of data provided for each positioning method:

0000 indicates the presence of the Positioning Data Set IE (that reports the usage of each non-GANSS method that was successfully used to obtain the location estimate) and the optional presence of the GANSS Positioning Data Set IE. It also indicates the optional presence of the Additional Positioning Data Set IE;

0001 indicates the presence of the GANSS Positioning Data Set IE (that reports the usage of each GANSS method that was successfully used to obtain the location estimate) and the absence of the Positioning Data Set IE. It also indicates the optional presence of the Additional Positioning Data Set IE;

0010 indicates the presence of the Additional Positioning Data Set IE and the absence of the Positioning Data Set and the GANSS Positioning Data Set IEs;

1 octet of data is provided for each positioning method included.

All other values are reserved.

–

Positioning Data Set

C-ifDiscriminator=0

–

>Positioning Method and Usage

1 to <maxSet>

OCTET STRING SIZE((1))

Coding of positioning method (bits 8-4):

00000 Reserved (NOTE);

00001 Reserved (NOTE);

00010 Reserved (NOTE);

00011 Reserved (NOTE);

00100 Reserved (NOTE);

00101 Mobile Assisted GPS;

00110 Mobile Based GPS;

00111 Conventional GPS;

01000 U-TDOA;

01001 OTDOA;

01010 IPDL;

01011 RTT;

01100 Cell ID;

01101 to 01111 reserved for other location technologies;

10000 to 11111 reserved for network specific positioning methods.

Coding of usage (bits 3-1):

000 Attempted unsuccessfully due to failure or interruption – not used.

001 Attempted successfully: results not used to generate location – not used.

010 Attempted successfully: results used to verify but not generate location – not used.

011 Attempted successfully: results used to generate location.

100 Attempted successfully: case where MS supports multiple mobile based positioning methods and the actual method or methods used by the MS cannot be determined.

NOTE: Reserved because of GERAN use only.

–

GANSS Positioning Data Set

O

YES

ignore

>GANSS Positioning Method and Usage

1 to <maxGANSSSet>

OCTET STRING (SIZE(1))

Coding of positioning method (bits 8-7):

00 MS-Based;

01 MS-Assisted;

10 Conventional;

11 Reserved.

Coding of GANSS ID (bits 6-4):

000 Galileo;

001 SBAS;

010 Modernized GPS;

011 QZSS;

100 GLONASS;

101 BDS (See BDS-SIS-ICD [66]);

other values reserved.

Coding of usage (bits 3-1):

011 Attempted successfully: results used to generate location;

100 Attempted successfully: case where MS supports multiple mobile based positioning methods and the actual method or methods used by the MS cannot be determined.

–

Additional Positioning Data Set

O

YES

ignore

>Additional Positioning Method and Usage

1 to <maxAddPosSet>

OCTET STRING (SIZE(1))

Coding of positioning method (bits 8-7):

00 Reserved;

01 MS-Assisted;

10 Standalone;

11 Reserved.

Coding of Additional Positioning ID (bits 6-4):

000 Barometric Pressure;

001 WLAN;

010 Bluetooth;

011 MBS;

other values reserved.

Coding of usage (bits 3-1):

011 Attempted successfully: results used to generate location;

100 Attempted successfully: case where MS supports multiple mobile based positioning methods and the actual method or methods used by the MS cannot be determined.

C-ifDiscriminator=0

This IE is present if the Positioning Data Discriminator IE is set to "0000".

maxSet

Maximum size of the data set. Value is 9.

maxGANSSSet

Maximum size of the data. Value is 9.

maxAddPosSet

Maximum size of the data. Value is 8.

Position Data Specific To GERAN Iu Mode

M

OCTET STRING

Coded as the value part of the Positioning Data IE or GANSS Positioning Data IE defined in TS 49.031 [34].

Accuracy Fulfilment Indicator

M

ENUMERATED (requested accuracy fulfilled,
requested accuracy not fulfilled,
…)

RIM Information

M

9.2.3.31

RIM Routing Address

O

9.2.3.32

RIM Information

M

OCTET STRING

Contains the BSSGP RIM PDU as defined in TS 48.018 [36].

Choice RIM Routing Address

–

>Target RNC-ID

>>Target RNC-ID

M

Applicable to GERAN Iu mode, not applicable to UTRAN.

–

>>>LAI

M

9.2.3.6

–

>>>RAC

O

9.2.3.7

–

>>>RNC-ID

M

INTEGER (0..4095)

If the Extended RNC-ID IE is included in the Target RNC-ID IE, the RNC-ID IE shall be ignored.

–

>>>Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

>GERAN-Cell-ID

>>GERAN-Cell-ID

M

–

>>>LAI

M

9.2.3.6

–

>>>RAC

M

9.2.3.7

–

>>>CI

M

OCTET STRING (SIZE(2))

–

>Target eNB-ID

>>Target eNB-ID

M

–

>>>PLMN identity

M

9.2.3.55

>>>CHOICE eNB ID

>>>>Macro eNB ID

BIT STRING (SIZE(20))

Equal to the 20 leftmost bits of the Cell Identity IE contained in the E-UTRAN CGI IE (see TS 36.413 [49]) of each cell served by the eNodeB.

–

>>>>Home eNB ID

BIT STRING (SIZE(28))

Equal to the Cell Identity IE contained in the E-UTRAN CGI IE (see TS 36.413 [49]) of the cell served by the eNodeB.

NOTE:

Inter-system route to a Home eNB is only supported for Enhanced CS Fallback purpose in this release.

–

>>>Selected TAI

M

9.2.1.30C

Contains the TAC of the target cell and the PLMN selected for that target cell.

–

Selected PLMN identity

M

PLMN Identity

9.2.3.55

NAS Sequence Number

M

BIT STRING (SIZE(2))

Contains the value of the N(SD) as defined in TS 24.008 [8].

Redirection Completed

M

ENUMERATED (redirection completed, …)

Initial NAS-PDU

M

9.2.3.5

The initial NAS-PDU received from UE

YES

ignore

Reject Cause Value

M

ENUMERATED

(PLMN not allowed, location area not allowed, roaming not allowed in this location area, no suitable cell in location area, GPRS services not allowed in this PLMN, CS/PS coordination required,

…,

Network failure, Not authorized for this CSG)

This IE lists cause values which meaning is defined in TS 24.008 [8] with the exception of "CS/PS coordination required" that will never be forwarded to the UE.

YES

ignore

NAS Sequence Number

O

9.2.3.34

YES

ignore

Permanent NAS UE Identity

O

9.2.3.1

YES

ignore

Additional CS/PS coordination information

O

9.2.3.56

YES

reject

PLMN identity

M

9.2.3.55

Service ID

M

OCTET STRING (SIZE (3))

MBMS Session Identity

M

OCTET STRING (SIZE (1))

Coded as the MBMS Session Identity IE, as defined in TS 29.061 [44].

MBMS Bearer Service Type

M

ENUMERATED (multicast, broadcast, …)

MBMS Counting Information

M

ENUMERATED (counting, not counting, …)

MBMS Session Duration

M

OCTET STRING (SIZE (3))

Coded as the value part of MBMS-Session-Duration AVP as defined in TS 29.061 [44].

MBMS Service Area

M

OCTET STRING

Value part coded per MBMS Service Area AVP as defined in TS 29.061 [44].

Choice RA List of Idle Mode UEs

>Not Empty RA List of Idle Mode UEs

The same RAC+LAI combination must only be present once.

>>RA of Idle Mode UEs

1 to <maxMBMSRA>

Each RAC in this list gives a valid RAI only if combined with an LAI of the same index contained in the LA of Idle Mode UEs IE.

>>>RAC

M

9.2.3.7

>>LA List of Idle Mode UEs

C-IfRAofIdleModeUEs

YES

reject

>>>LA of Idle Mode UEs

1 to <maxMBMSRA>

>>>>LAI

M

9.2.3.6

–

>Empty/Full RA List of Idle Mode UEs

>>Empty/Full RA List of Idle Mode UEs

ENUMERATED (emptylist, fulllist,…)

maxMBMSRA

Maximum no. of Routing Areas where idle-mode UEs interested in a given Multicast Service are. The value for maxMBMSRA is 65536.

IfRAofIdleModeUEs

This IE shall be present if the RA of Idle Mode UEs IE is included.

Delta RA List of Idle Mode UEs

The same RAC+LAI combination must only be present once.

>New RA List of Idle Mode UEs

O

>>New RA of Idle Mode UEs

1 to <maxMBMSRA>

Each RAC in this list gives a valid RAI only if combined with an LAI of the same index contained in the LA of Idle Mode UEs IE.

>>>RAC

M

9.2.3.7

>RA List with No Idle Mode UEs Any More

O

>>RA with No Idle Mode UEs Any More

1 to <maxMBMSRA>

Each RAC in this list gives a valid RAI only if combined with an LAI of the same index contained in the LA of Idle Mode UEs IE.

>>>RAC

M

9.2.3.7

>New LA List of Idle Mode UEs

C-IfNewRAListofIdleModeUEs

YES

reject

>>New LA of Idle Mode UEs

1 to <maxMBMSRA>

>>>LAI

M

9.2.3.6

>LA List with No Idle Mode UEs Any More

C-IfRAListWithNoIdleModeUEsAnyMore

YES

reject

>>LA with No Idle Mode UEs Any More

1 to <maxMBMSRA>

>>>LAI

M

9.2.3.6

maxMBMSRA

Maximum no. of Routing Areas where idle-mode UEs interested in a given Multicast Service are. The value for maxMBMSRA is 65536.

IfNewRAListofIdleModeUEs

This IE shall be present if the New RA List of Idle Mode UEs IE is included.

IfRAListWithNoIdleModeUEsAnyMore

This IE shall be present if the RA List with No Idle Mode UEs Any More IE is included.

MBMS CN De-Registration

M

ENUMERATED(

normal session stop,

deregister, …)

MBMS Registration Request Type

M

ENUMERATED(

register,

deregister, …)

MBMS IP Multicast Address and APN list

1 to <maxnoofMulticastServicesPerRNC>

>TMGI

M

9.2.3.37

>IP Multicast Address

M

OCTET STRING (SIZE(4..16))

Transparent information to RAN.

Octet string size 4 represents Ipv4 address.

Octet string size 16 represents Ipv6 address.

>APN

M

OCTET STRING (SIZE(1..255))

Transparent information to RAN.

maxnoofMulticastServicesPerRNC

Maximum no. of Multicast Services that a RNC can have context for. Value is 512.

TMGI

1 to <maxnoofMulticastServicesJoinedPerUE>

9.2.3.37

The same TMGI must only be present once.

maxnoofMulticastServicesJoinedPerUE

Maximum no. of Multicast Services that a UE can join respectively. Value is 128.

MBMS Session Repetition Number

M

OCTET STRING (SIZE (1))

Coded as the value part of MBMS-Session -Repetition-Number AVP as defined in TS 29.061 [44].

Time to MBMS Data Transfer

M

OCTET STRING (SIZE (1))

Coded as the value part of Time to MBMS Data Transfer IE defined in TS 48.018 [36].

Redirect Attempt Flag

M

NULL

Choice Velocity Estimate

>Horizontal Velocity

>>Horizontal Velocity

M

See below

Horizontal speed and bearing (the direction of travel).

>Horizontal with Vertical Velocity

>>Horizontal with Vertical Velocity

M

See below

Horizontal speed, bearing (the direction of travel), and vertical speed.

>Horizontal Velocity with Uncertainty

>>Horizontal Velocity with Uncertainty

M

See below

Horizontal speed, bearing (the direction of travel), and the uncertainty of the reported speed.

>Horizontal with Vertical Velocity and Uncertainty

>>Horizontal with Vertical Velocity and Uncertainty

M

See below

Horizontal speed, bearing (the direction of travel), vertical speed and the uncertainty of the reported speed.

Horizontal Velocity

>Horizontal Speed and Bearing

M

See below

Horizontal with Vertical Velocity

>Horizontal Speed and Bearing

M

See below

>Vertical Velocity

M

See below

Horizontal Velocity with Uncertainty

>Horizontal Speed and Bearing

M

See below

>>Uncertainty Speed

M

INTEGER

(0..255)

Uncertainty speed is encoded in increments of 1 kilometre per hour using an 8 bit binary coded number (N). The value of N gives the uncertainty speed except for N=255 which indicates that the uncertainty is not specified.

Horizontal with Vertical Velocity and Uncertainty

>Horizontal Speed and Bearing

M

See below

>>Vertical Velocity

M

See below

>>Horizontal Uncertainty Speed

M

INTEGER

(0..255)

Horizontal Uncertainty Speed is encoded in increments of 1 kilometre per hour using an 8 bit binary coded number (N). The value of N gives the uncertainty speed except for N=255 which indicates that the uncertainty is not specified.

>>Vertical Uncertainty Speed

M

INTEGER

(0..255)

Vertical Uncertainty speed is encoded in increments of 1 kilometre per hour using an 8 bit binary coded number (N). The value of N gives the uncertainty speed except for N=255 which indicates that the uncertainty is not specified.

Horizontal Speed and Bearing

>Bearing

M

INTEGER

(0..359)

The direction of movement is given in degrees where ‘0’ represents North, ‘90’ represents East, etc.

>Horizontal Speed

M

INTEGER

(0..< 2¹¹-1)

The relationship between (N) and the horizontal speed (h) in kilometres per hour it describes is:

N  h < N + 0.5 (N=0)

N – 0.5  h < N + 0.5 (0<N<2¹¹-1)

N – 0.5  h (N = 2¹¹-1).

Vertical Velocity

>Vertical Speed

M

INTEGER

(0..2⁸-1)

The relationship between (N) and the vertical speed (v) in kilometres per hour it describes is:

N  v < N + 0.5 (N = 0)

N – 0.5  v < N + 0.5 (0 < N < 2⁸-1)

N – 0.5  v (N = 2⁸-1).

>Vertical Speed Direction

M

ENUMERATED (upward, downward)

RAT Type

O

ENUMERATED(UTRAN, GERAN, …)

GERAN means GERAN Gb mode. UTRAN means UTRAN but may also include GERAN Iu mode.

Requested GANSS Assistance Data

OCTET STRING (SIZE(1..201))

For the corresponding Information Element Definition see "ganssAssistanceData" TS 24.080 [22].

Higher bitrates than 16 Mbps flag

ENUMERATED (allowed, not-allowed, …)

PLMN identity

M

OCTET STRING (SIZE (3))

– digits 0 to 9, encoded 0000 to 1001,

– 1111 used as filler digit,

two digits per octet,

– bits 4 to 1 of octet n encoding digit 2n-1,

– bits 8 to 5 of octet n encoding digit 2n.

– The PLMN identity consists of 3 digits from MCC followed by either
– a filler digit plus 2 digits from MNC (in case of 2 digit MNC) or
– 3 digits from MNC (in case of a 3 digit MNC).

Additional CS/PS coordination information

>Old LAI

O

LAI
9.2.3.6

See TS 23.251 [39].

>Old RAC

O

RAC
9.2.3.7

See TS 23.251 [39].

>NRI

O

BIT STRING (SIZE (10))

This IE is not used and shall be ignored by the receiver.

>UE is Attaching

O

NULL

See TS 23.251 [39].

Choice SGSN Group Identity

>Null-NRI

>>Null-NRI

M

BIT STRING (SIZE(10))

>SGSN Group ID

>>SGSN Group ID

M

OCTET STRING (SIZE(2))

Barometric Pressure

O

INTEGER (30000..115000)

This IE specifies the measured uncompensated atmospheric pressure in units of Pascal (Pa).

Civic Address

O

OCTET STRING

This IE contains a UTF-8 encoded PIDF-LO XML document as defined in IETF RFC 4119 [69]. The document shall only contain a civic address using the namespaces "urn:ietf:params:xml:ns:pidf:geopriv10:civicAddr" per IETF RFC 5139 [70] and "urn:ietf:params:xml:ns:pidf:geopriv10:civicAddr:ext" per IETF RFC 6848 [71].