M

IEs marked as Mandatory (M) shall always be included in the message.

O

IEs marked as Optional (O) may or may not be included in the message.

C

IEs marked as Conditional (C) shall be included in a message only if the condition is satisfied. Otherwise the IE shall not be included.

–

No criticality information is applied explicitly.

YES

Criticality information is applied. This is usable only for non-repeatable IEs

GLOBAL

The IE and all its repetitions together have one common criticality information. This is usable only for repeatable IEs.

EACH

Each repetition of the IE has its own criticality information. It is not allowed to assign different criticality values to the repetitions. This is usable only for repeatable IEs.

Message Type

M

9.2.1.1

YES

reject

RABs To Be Setup Or Modified List

O

YES

ignore

>RABs To Be Setup Or Modified Item IEs

1 to <maxnoofRABs>

>>First Setup Or Modify Item

M

Grouping reason: same criticality.

EACH

reject

>>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>>NAS Synchronisation Indicator

O

9.2.3.18

–

>>>RAB Parameters

O

9.2.1.3

Includes all necessary parameters for RABs (both for MSC and SGSN) including QoS.

–

>>>User Plane Information

O

–

>>>>User Plane Mode

M

9.2.1.18

–

>>>>UP Mode Versions

M

9.2.1.19

–

>>>Transport Layer Information

O

–

>>>>Transport Layer Address

M

9.2.2.1

–

>>>>Iu Transport Association

M

9.2.2.2

–

>>>Service Handover

O

9.2.1.41

–

>>>E-UTRAN Service Handover

O

9.2.1.90

YES

ignore

>>>Correlation ID

O

9.2.2.5

–

>>>SIPTO Correlation ID

O

Correlation ID

9.2.2.5

YES

ignore

>>Second Setup Or Modify Item

M

Grouping reason: same criticality.

EACH

ignore

>>>PDP Type Information

O

9.2.1.40

–

>>>Data Volume Reporting
Indication

O

9.2.1.17

–

>>>DL GTP-PDU Sequence Number

O

9.2.2.3

–

>>>UL GTP-PDU Sequence Number

O

9.2.2.4

–

>>>DL N-PDU Sequence Number

O

9.2.1.33

–

>>>UL N-PDU Sequence Number

O

9.2.1.34

–

>>>Alternative RAB Parameter Values

O

9.2.1.43

YES

ignore

>>>GERAN BSC Container

O

9.2.1.58

YES

ignore

>>>PDP Type Information extension

O

9.2.1.40a

The PDP Type Information extension IE can only be included if PDP Type Information IE is not present.

YES

ignore

>>>Offload RAB parameters

O

9.2.1.94

Applicable only for SIPTO at Iu-PS.

YES

ignore

RABs To Be Released List

O

YES

ignore

>RABs To Be Released Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>Cause

M

9.2.1.4

–

UE Aggregate Maximum Bit Rate

O

9.2.1.91

YES

ignore

MSISDN

O

9.2.1.95

Applicable only for SIPTO at Iu-PS.

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

RABs Setup Or Modified List

O

YES

ignore

>RABs Setup Or Modified Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>Transport Layer Address

O

9.2.2.1

–

>>Iu Transport Association

O

9.2.2.2

–

>>DL Data Volumes

O

–

>>>Data Volume List

1 to <maxnoofVol>

–

>>>>Unsuccessfully Transmitted DL Data Volume

M

9.2.3.12

–

>>>>Data Volume Reference

O

9.2.3.13

–

>>Assigned RAB Parameter Values

O

9.2.1.44

YES

ignore

RABs Released List

O

YES

ignore

>RABs Released Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>DL Data Volumes

O

–

>>>Data Volume List

1 to <maxnoofVol>

–

>>>>Unsuccessfully Transmitted DL Data Volume

M

9.2.3.12

–

>>>>Data Volume Reference

O

9.2.3.13

–

>>DL GTP-PDU Sequence Number

O

9.2.2.3

–

>>UL GTP-PDU Sequence Number

O

9.2.2.4

–

RABs Queued List

O

YES

ignore

>RABs Queued Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

RABs Failed To Setup Or Modify List

O

YES

ignore

>RABs Failed To Setup Or Modify Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>Cause

M

9.2.1.4

–

RABs Failed To Release List

O

YES

ignore

>RABs Failed To Release Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>Cause

M

9.2.1.4.

–

Criticality Diagnostics

O

9.2.1.35

YES

ignore

GERAN Iu mode specific RABs Failed To Setup Or Modify List

O

This applies only in GERAN Iu mode case.

YES

ignore

>GERAN Iu mode specific RABs Failed To Setup Or Modify Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

The same RAB ID must only be present in one group.

–

>>Cause

M

9.2.1.4

–

>>GERAN Classmark

O

9.2.1.57

–

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

maxnoofVol

Maximum no. of reported data volume for one RAB. Value is 2.

Message Type

M

9.2.1.1

YES

ignore

RABs To Be Released List

M

YES

ignore

>RABs To Be Released Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Cause

M

9.2.1.4

–

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

Cause

M

9.2.1.4

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

End Of CSFB

O

9.2.1.111

YES

ignore

Out Of UTRAN

O

9.2.1.112

YES

ignore

Last E-UTRAN PLMN Identity

O

9.2.3.55

PLMN Identity

Indicates the E-UTRAN PLMN ID where the UE formerly requested CS Fallback to UTRAN.

YES

ignore

Message Type

M

9.2.1.1

YES

reject

RABs Data Volume Report List

O

YES

ignore

>RABs Data Volume Report Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>RAB Data Volume Report List

O

–

>>>RAB Data Volume Report Item IEs

1 to <maxnoofVol>

–

>>>>Unsuccessfully Transmitted DL Data Volume

M

9.2.3.12

–

>>>>Data Volume Reference

O

9.2.3.13

–

RABs Released List

O

YES

ignore

>RABs Released Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>DL GTP-PDU Sequence Number

O

9.2.2.3

–

>>UL GTP-PDU Sequence Number

O

9.2.2.4

–

Criticality Diagnostics

O

9.2.1.35

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

maxnoofVol

Maximum no. of reported data volume for one RAB. Value is 2.

Message Type

M

9.2.1.1

YES

reject

Relocation Type

M

9.2.1.23

YES

reject

Cause

M

9.2.1.4

YES

ignore

Source ID

M

9.2.1.24

YES

ignore

Target ID

M

9.2.1.25

YES

reject

MS Classmark 2

C – ifGSMCStarget

9.2.1.26

YES

reject

MS Classmark 3

C – ifGSMCStarget

9.2.1.27

YES

ignore

Source To Target Transparent Container

C – ifUMTStarget or ifEUTRAtarget

9.2.1.30A

YES

reject

Old BSS To New BSS Information

O

9.2.1.29

Can optionally be used if GSM target but not used for UMTS target.

YES

ignore

GERAN Classmark

O

9.2.1.57

YES

ignore

Source BSS To Target BSS Transparent Container

O

9.2.1.79

Shall be included if, and only if, GSM PS domain is target.

YES

ignore

SRVCC HO Indication

O

9.2.1.88

YES

reject

CSG Id

O

9.2.1.85

YES

reject

Cell Access Mode

O

9.2.1.93

YES

reject

rSRVCC HO Indication

O

9.2.1.114

YES

reject

UE Application layer measurement configuration for relocation

O

9.2.1.129

YES

ignore

ifGSMCStarget

This IE shall be present if the Target ID IE contains a CGI IE and Source BSS To Target BSS Transparent Container is not included.

ifUMTStarget

This IE shall be present if the Target ID IE contains a Target RNC-ID IE.

ifEUTRAtarget

This IE shall be present if the Target ID IE contains a Target eNB-ID IE or if the Target ID IE contains a Target RNC-ID IE containing a Corresponding RNC-ID.

Message Type

M

9.2.1.1

YES

reject

Permanent NAS UE Identity

O

9.2.3.1

YES

ignore

Cause

M

9.2.1.4

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

reject

Source To Target Transparent Container

M

9.2.1.30a

Encoded as the Source RNC To Target RNC Transparent Container IE defined in subclause 9.2.1.28.

YES

reject

RABs To Be Setup List

O

YES

reject

>RABs To Be Setup Item IEs

1 to <maxnoofRABs>

EACH

reject

>>RAB ID

M

9.2.1.2

–

>>NAS Synchronisation Indicator

O

9.2.3.18

–

>>RAB Parameters

M

9.2.1.3

–

>>Data Volume Reporting Indication

C – ifPS

9.2.1.17

–

>>PDP Type Information

C – ifPS

9.2.1.40

–

>>User Plane Information

M

–

>>>User Plane Mode

M

9.2.1.18

–

>>>UP Mode Versions

M

9.2.1.19

–

>>Transport Layer Address

M

9.2.2.1

–

>>Iu Transport Association

M

9.2.2.2

–

>>Service Handover

O

9.2.1.41

–

>>Alternative RAB Parameter Values

O

9.2.1.43

YES

ignore

>>GERAN BSC Container

O

9.2.1.58

YES

ignore

>>E-UTRAN Service Handover

O

9.2.1.90

YES

ignore

>>PDP Type Information extension

O

9.2.1.40a

The PDP Type Information extension IE can only be included if PDP Type Information IE is present.

YES

ignore

>>Offload RAB parameters

O

9.2.1.94

Applicable only for SIPTO at Iu-PS

YES

ignore

Integrity Protection Information

O

9.2.1.11

Integrity Protection Information includes key and permitted algorithms.

YES

ignore

Encryption Information

O

9.2.1.12

Encryption Information includes key and permitted algorithms.

YES

ignore

Iu Signalling Connection Identifier

M

9.2.1.38

YES

ignore

Global CN-ID

O

9.2.1.46

YES

reject

SNA Access Information

O

9.2.3.24

YES

ignore

UESBI-Iu

O

9.2.1.59

YES

ignore

Selected PLMN Identity

O

9.2.3.33

YES

ignore

CN MBMS Linking Information

O

YES

ignore

>Joined MBMS Bearer Service IEs

1 to <maxnoofMulticastServicesPerUE>

EACH

ignore

>>TMGI

M

9.2.3.37

The same TMGI must only be present in one group.

–

–

>>PTP RAB ID

M

9.2.1.75

–

–

UE Aggregate Maximum Bit Rate

O

9.2.1.91

YES

ignore

CSG Id

O

9.2.1.85

YES

reject

CSG Membership Status

O

9.2.1.92

YES

ignore

MSISDN

O

9.2.1.95

Applicable only for SIPTO at Iu-PS.

YES

ignore

Anchor PLMN Identity

O

PLMN Identity

9.2.3.55

Indicates the PS core network operator in case of SRVCC (see TS 23.251 [39])

YES

ignore

Power Saving Indicator

O

9.2.1.126

YES

ignore

UE Application layer measurement configuration for relocation

O

9.2.1.129

YES

ignore

IfPS

This IE shall be present if the CN domain indicator IE is set to "PS domain".

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

maxnoofMulticastServicesPerUE

Maximum no. of Multicast Services that a UE can join and leave respectively. Value is 128.

Message Type

M

9.2.1.1

YES

reject

Target To Source Transparent Container

O

9.2.1.30b

Encoded as the Target RNC To Source RNC Transparent Container IE defined in subclause 9.2.1.30.

YES

ignore

RABs Setup List

O

YES

ignore

>RABs Setup Item IEs

1 to <maxnoofRABs>

EACH

reject

>>RAB ID

M

9.2.1.2

–

>>Transport Layer Address

O

9.2.2.1

IPv6 or IPv4 address if no other TLA included. IPv4 address if other TLA included.

–

>>Iu Transport Association

O

9.2.2.2

Related to TLA above.

–

>>Assigned RAB Parameter Values

O

9.2.1.44

YES

ignore

>>Transport Layer Address

O

9.2.2.1

IPv6 address if included.

YES

ignore

>>Iu Transport Association

O

9.2.2.2

Related to TLA above.

YES

ignore

RABs Failed To Setup List

O

YES

ignore

>RABs Failed To Setup Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Cause

M

9.2.1.4

–

Chosen Integrity Protection Algorithm

O

9.2.1.13

Indicates the Integrity Protection algorithm that will be used by the target RNC.

YES

ignore

Chosen Encryption Algorithm

O

9.2.1.14

Indicates the Encryption algorithm that will be used by the target RNC.

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

New BSS To Old BSS Information

O

9.2.1.47

Defined in TS 48.008 [11].

YES

ignore

CSG Id

O

9.2.1.85

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

Target To Source Transparent Container

O

9.2.1.30B

YES

reject

L3 Information

O

9.2.1.31

YES

ignore

RABs To Be Released List

O

YES

ignore

>RABs To Be Released Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

RABs Subject To Data Forwarding List

O

YES

ignore

>RABs Subject To Data Forwarding Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Transport Layer Address

M

9.2.2.1

IPv6 or IPv4 address if no other TLA included. IPv4 address if other TLA included.

–

>>Iu Transport Association

M

9.2.2.2

Related to TLA above.

–

>>Transport Layer Address

O

9.2.2.1

IPv6 address if included.

YES

ignore

>>Iu Transport Association

O

9.2.2.2

Related to TLA above.

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Inter-System Information Transparent Container

O

9.2.1.48

YES

ignore

Target BSS to Source BSS Transparent Container

O

9.2.1.80

YES

ignore

SRVCC Information

O

9.2.1.89

YES

reject

rSRVCC Information

O

9.2.1.115

YES

reject

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Higher bitrates than 16 Mbps flag

O

9.2.3.54

May only be included towards the PS domain.

YES

ignore

Tunnel Information for BBF

O

Tunnel Information 9.2.2.6

Indicating HNB’s Local IP Address assigned by the broadband access provider, UDP port Number.

YES

ignore

LHN ID

O

9.2.1.123

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Inter-System Information Transparent Container

O

9.2.1.48

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

New BSS to Old BSS Information

O

9.2.1.47

Defined in TS 48.008 [11].

YES

ignore

GERAN Classmark

O

9.2.1.57

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

reject

RABs Subject To Data Forwarding List

M

YES

ignore

>RABs Subject To Data Forwarding Item IEs

1 to <maxnoofRABs>

EACH

reject

>>RAB ID

M

9.2.1.2

–

RAT Type

O

9.2.3.52

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

RABs Contexts List

O

YES

ignore

>RABs Contexts Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>DL GTP-PDU Sequence Number

O

9.2.2.3

–

>>UL GTP-PDU Sequence Number

O

9.2.2.4

–

>>DL N-PDU Sequence Number

O

9.2.1.33

–

>>UL N-PDU Sequence Number

O

9.2.1.34

–

RABs Contexts Failed To Transfer List

O

YES

ignore

>RABs Contexts Failed To Transfer Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Cause

M

9.2.1.4

–

Criticality Diagnostics

O

9.2.1.35

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

RABs Subject To Data Forwarding List

O

YES

ignore

>RABs Subject To Data Forwarding Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Transport Layer Address

M

9.2.2.1

–

>>Iu Transport Association

M

9.2.2.2

–

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

RAB Contexts List

M

YES

ignore

>RAB Contexts Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>DL GTP-PDU Sequence
Number

O

9.2.2.3

–

>>UL GTP-PDU Sequence
Number

O

9.2.2.4

–

>>DL N-PDU Sequence Number

O

9.2.1.33

–

>>UL N-PDU Sequence Number

O

9.2.1.34

–

Source RNC PDCP context info

O

9.2.1.54

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Permanent NAS UE Identity

M

9.2.3.1

YES

ignore

Temporary UE Identity

O

9.2.3.2

YES

ignore

Paging Area ID

O

9.2.1.21

YES

ignore

Paging Cause

O

9.2.3.3

YES

ignore

Non Searching Indication

O

9.2.1.22

YES

ignore

DRX Cycle Length Coefficient

O

9.2.1.37

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

CSG Id List

0 to < maxnoofCSGId >

YES

ignore

>CSG Id

M

9.2.1.85

maxnoofCSGIds

Maximum no. of CSG Ids within the CSG Id List. Value is 256.

Message Type

M

9.2.1.1

YES

ignore

Permanent NAS UE Identity

M

9.2.3.1

YES

ignore

SNA Access Information

O

9.2.3.24

YES

ignore

UESBI-Iu

O

9.2.1.59

YES

ignore

Selected PLMN Identity

O

9.2.3.33

YES

ignore

Subscriber Profile ID for RAT/Frequency priority

O

9.2.1.86

YES

ignore

SRVCC operation possible

O

9.2.1.87

YES

ignore

CSG Membership Status

O

9.2.1.92

YES

ignore

Management Based MDT Allowed

O

9.2.1.110

YES

ignore

Management Based MDT PLMN List

O

MDT PLMN List

9.2.1.116

YES

ignore

rSRVCC operation possible

O

9.2.1.121

YES

ignore

Last E-UTRAN PLMN Identity

O

9.2.3.55

PLMN Identity

Indicates the E-UTRAN PLMN ID where the UE formerly requested CS Fallback to UTRAN.

YES

ignore

Power Saving Indicator

O

9.2.1.126

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Trace Type

O

9.2.1.6

Mandatory for GERAN Iu Mode. Not applicable to UTRAN.

YES

ignore

Trace Reference

M

9.2.1.8

YES

ignore

Trigger ID

O

9.2.1.7

Mandatory for GERAN Iu Mode. Not applicable to UTRAN.

YES

ignore

UE Identity

O

9.2.1.9

Mandatory for UTRAN. Optional for GERAN Iu Mode.

YES

ignore

OMC ID

O

9.2.1.10

Mandatory for GERAN Iu Mode. Not applicable to UTRAN.

YES

ignore

Trace Propagation Parameters

O

9.2.1.68

Optional for UTRAN. Not applicable to GERAN Iu Mode.

YES

ignore

MDT Configuration

O

9.2.1.97

YES

ignore

Trace Collection Entity IP Address

O

9.2.2.1

YES

ignore

UE Application layer measurement configuration

O

9.2.1.127

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Integrity Protection Information

M

9.2.1.11

Integrity information includes key and permitted algorithms.

YES

reject

Encryption Information

O

9.2.1.12

Encryption information includes key and permitted algorithms.

YES

ignore

Key Status

M

9.2.1.36

YES

reject

Message Type

M

9.2.1.1

YES

reject

Chosen Integrity Protection Algorithm

M

9.2.1.13

YES

reject

Chosen Encryption Algorithm

O

9.2.1.14

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Request Type

M

9.2.1.16

YES

ignore

Vertical Accuracy Code

O

9.2.1.46a

YES

ignore

Response Time

O

9.2.1.46b

YES

ignore

Positioning Priority

O

9.2.1.46c

YES

ignore

Client Type

O

9.2.1.46d

YES

ignore

Include Velocity

O

9.2.1.81

YES

ignore

Periodic Location Info

O

9.2.1.82

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Area Identity

O

9.2.3.10

YES

ignore

Cause

O

9.2.1.4

YES

ignore

Request Type

O

9.2.1.16

YES

ignore

Last Known Service Area

O

9.2.3.22

YES

ignore

Position Data

O

9.2.3.27

Optional for UTRAN only.

YES

ignore

Position Data Specific To GERAN Iu Mode

O

9.2.3.28

Coded as the value part of the Positioning Data IE defined in TS 49.031 [34]. Optional for GERAN Iu mode only. Not applicable for UTRAN.

YES

ignore

Accuracy Fulfilment Indicator

O

9.2.3.29

YES

ignore

Velocity Estimate

O

9.2.3.51

YES

ignore

Barometric Pressure

O

9.2.3.58

YES

ignore

Civic Address

O

9.2.3.59

YES

ignore

Message Type

M

9.2.1.1

YES

reject

RABs Data Volume Report List

M

YES

ignore

>RABs Data Volume Report Item IEs

1 to <maxnoofRABs>

EACH

reject

>>RAB ID

M

9.2.1.2

–

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

RABs Data Volume Report List

O

YES

ignore

>RABs Data Volume Report Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>RAB Data Volume Report List

O

–

>>>RAB Data Volume Report Item IEs

1 to <maxnoofVol>

–

>>>>Unsuccessfully Transmitted DL Data Volume

M

9.2.3.12

–

>>>>Data Volume Reference

O

9.2.3.13

–

RABs Failed To Report List

O

YES

ignore

>RABs Failed To Report Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>Cause

M

9.2.1.4

–

Criticality Diagnostics

O

9.2.1.35

YES

ignore

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

maxnoofVol

Maximum no. of reported data volume for one RAB. Value is 2.

Message Type

M

9.2.1.1

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

LAI

M

9.2.3.6

YES

ignore

RAC

C – ifPS

9.2.3.7

YES

ignore

SAI

M

9.2.3.9

YES

ignore

NAS-PDU

M

9.2.3.5

YES

ignore

Iu Signalling Connection Identifier

M

9.2.1.38

YES

ignore

Global RNC-ID

M

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

GERAN Classmark

O

9.2.1.57

YES

ignore

Selected PLMN Identity

O

9.2.3.33

YES

ignore

NAS Sequence Number

O

9.2.3.34

YES

ignore

Permanent NAS UE Identity

O

9.2.3.1

YES

ignore

Redirect Attempt Flag

O

9.2.3.50

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

CSG Id

O

9.2.1.85

YES

reject

Cell Access Mode

O

9.2.1.93

YES

reject

L-GW Transport Layer Address

O

Transport Layer Address

9.2.2.1

Indicating the Transport Layer address of the L-GW if the L-GW is co-located with the RNC. Only applies to LIPA operation.

YES

ignore

Higher bitrates than 16 Mbps flag

O

9.2.3.54

May only be included towards the PS domain.

YES

ignore

Tunnel Information for BBF

O

Tunnel Information 9.2.2.6

Indicating HNB’s Local IP Address assigned by the broadband access provider, UDP port Number.

YES

ignore

SIPTO L-GW Transport Layer Address

O

Transport Layer Address

9.2.2.1

Indicating the Transport Layer address of the L-GW if the L-GW is co-located with the RNC. Only applies to SIPTO@LN operation.

YES

ignore

LHN ID

O

9.2.1.123

YES

ignore

SGSN Group Identity

O

9.2.3.57

YES

ignore

UE Usage Type

O

INTEGER (0..255)

YES

ignore

DCN ID

O

INTEGER (0..65535)

YES

ignore

UE Application Layer Measurement Capability

O

BIT STRING (SIZE(8))

Each bit in the bitmap indicates an UE Application layer measurement capability, refer to TS 25.331[10].

Bit 0 = QoE Measurement for streaming service

Bit 1 = QoE Measurement for MSTI service

Value ‘1’ indicates “Capable” and value ‘0’ indicates “not Capable”.

Unused bits are reserved for future use.

YES

ignore

ifPS

This IE shall be present if the CN Domain Indicator IE is set to "PS domain".

Message Type

M

9.2.1.1

YES

ignore

NAS-PDU

M

9.2.3.5

YES

ignore

LAI

O

9.2.3.6

YES

ignore

RAC

O

9.2.3.7

YES

ignore

SAI

O

9.2.3.9

YES

ignore

SAPI

O

9.2.3.8

YES

ignore

Redirection Indication

O

9.2.3.36

YES

ignore

Redirection Completed

O

9.2.3.35

YES

ignore

Subscriber Profile ID for RAT/Frequency priority

O

9.2.1.86

YES

ignore

L-GW Transport Layer Address

O

Transport Layer Address

9.2.2.1

Indicating the Transport Layer address of the L-GW if the L-GW is co-located with RNC. It can only be transmitted from the RNC to the CN. Only applies to LIPA operation.

YES

ignore

SIPTO L-GW Transport Layer Address

O

Transport Layer Address

9.2.2.1

Indicating the Transport Layer address of the L-GW if the L-GW is co-located with the RNC. Only applies to SIPTO@LN operation.

YES

ignore

LHN ID

O

9.2.1.123

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Number Of Steps

O

9.2.1.32

YES

ignore

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

CN Domain Indicator

O

9.2.1.5

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Priority Class Indicator

O

9.2.1.109

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

reject

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

reject

CN Domain Indicator

M

9.2.1.5

YES

reject

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

ignore

Cause

O

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

CN Domain Indicator

O

9.2.1.5

YES

ignore

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

ignore

Trace Reference

M

9.2.1.8

YES

ignore

Trigger ID

O

9.2.1.7

Optional for GERAN Iu Mode.

Not applicable to UTRAN.

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Direct Transfer Information List

O

YES

ignore

>Direct Transfer Information Item IEs

1 to <maxnoofDT>

Information received in one or more DIRECT TRANSFER messages and that needs to be transferred to target RNC for further transmission to the UE.

EACH

ignore

>>NAS-PDU

M

9.2.3.5

–

>>SAPI

M

9.2.3.8

–

>>CN Domain Indicator

M

9.2.1.5

–

RAB Contexts List

O

YES

ignore

>RAB Contexts Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

–

>>DL GTP-PDU Sequence Number

O

9.2.2.3

–

>>UL GTP-PDU Sequence Number

O

9.2.2.4

–

>>DL N-PDU Sequence Number

O

9.2.1.33

–

>>UL N-PDU Sequence Number

O

9.2.1.34

–

Source RNC PDCP context info

O

9.2.1.54

YES

ignore

RNSAP Relocation parameters

O

9.2.1.101

Applicable only to RNSAP relocation.

YES

reject

maxnoofDT

Maximum no. of DT information. Value is 15.

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

CN Domain Indicator

M

9.2.1.5

YES

reject

Cause

M

9.2.1.4

YES

ignore

Reset Resource List

M

YES

ignore

>Reset Resource Item IEs

1 to <maxnoofIuSigConIds>

EACH

reject

>>Iu Signalling Connection Identifier

M

9.2.1.38

Contains start of the range if Iu Sig Conn Id Range End is also included.

–

>>Iu Sig Conn Id Range End

O

Iu Signalling Connection Identifier

9.2.1.38

Contains end of range when included.

YES

reject

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

maxnoofIuSigConIds

Maximum no. of Iu signalling connection identifiers. Value is 250.

Message Type

M

9.2.1.1

YES

reject

CN Domain Indicator

M

9.2.1.5

YES

reject

Reset Resource List

M

YES

ignore

>Reset Resource Item IEs

1 to <maxnoofIuSigConIds>

This list shall be in the same order as the list received in the RESET RESOURCE message.

EACH

reject

>>Iu Signalling Connection Identifier

M

9.2.1.38

Contains start of the range if Iu Sig Conn Id Range End is also included.

–

>>Iu Sig Conn Id Range End

O

Iu Signalling Connection Identifier

9.2.1.38

Contains end of range when included.

YES

ignore

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

maxnoofIuSigConIds

Maximum no. of Iu signalling connection identifiers. Value is 250.

Message Type

M

9.2.1.1

YES

ignore

RABs To Be Modified List

M

YES

ignore

>RABs To Be Modified Item IEs

1 to <maxnoofRABs>

EACH

ignore

>>RAB ID

M

9.2.1.2

Uniquely identifies the RAB for a specific CN domain, for a particular UE.

–

>>Requested RAB Parameter Values

M

9.2.1.45

Includes RAB parameters for which different values than what was originally negotiated are being requested.

–

maxnoofRABs

Maximum no. of RABs for one UE. Value is 256.

Message Type

M

9.2.1.1

YES

reject

Location Related Data Request Type

O

9.2.3.19

Mandatory for UTRAN. Optional for GERAN Iu Mode.

YES

reject

Location Related Data Request Type Specific To GERAN Iu Mode

O

9.2.3.26

Optional for GERAN Iu Mode only. Not applicable for UTRAN.

YES

reject

Requested GANSS Assistance Data

C – ifDedAssGANSS

9.2.3.53

YES

reject

ifDedAssGANSS

This IE shall be present if the Requested Location Related Data Type IE is set to ‘Dedicated Assistance Data for Assisted GANSS’ or ‘Dedicated Assistance Data for Assisted GPS and GANSS’.

Message Type

M

9.2.1.1

YES

reject

Broadcast Assistance Data Deciphering Keys

O

9.2.3.20

Deciphering keys for UE based OTDOA or Assisted GPS.

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Broadcast GANSS Assistance Data Deciphering Keys

O

9.2.3.20

Deciphering keys for Assisted GANSS.

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Information Transfer ID

M

9.2.1.55

YES

reject

Provided Data

M

9.2.1.56

YES

reject

CN Domain Indicator

M

9.2.1.5

YES

reject

Global CN-ID

O

9.2.1.46

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Information Transfer ID

M

9.2.1.55

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Global RNC-ID

M

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

reject

Information Transfer ID

M

9.2.1.55

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Global RNC-ID

M

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

ignore

UESBI-Iu

O

9.2.1.59

YES

ignore

Message Type

M

9.2.1.1

YES

ignore

Inter-system Information Transfer Type

O

9.2.1.62

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Global RNC-ID

O

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Message Type

M

9.2.1.1

YES

reject

Information Exchange ID

M

9.2.1.71

YES

reject

Information Exchange Type

M

9.2.1.72

YES

reject

Information Transfer Type

C – iftransfer

9.2.1.63

YES

reject

Information Request Type

C – ifrequest

9.2.1.73

YES

reject

CN Domain Indicator

M

9.2.1.5

YES

reject

Global RNC-ID

M

9.2.1.39

If the Extended RNC-ID IE is included in the message, the RNC-ID IE in the Global RNC-ID IE shall be ignored.

YES

reject

Extended RNC-ID

O

9.2.1.39a

The Extended RNC-ID IE shall be used if the RNC identity has a value larger than 4095.

YES

reject

Iftransfer

This IE shall be present if the Information Exchange Type IE is set to "transfer".

Ifrequest

This IE shall be present if the Information Exchange Type IE is set to "request".

Message Type

M

9.2.1.1

YES

reject

Information Exchange ID

M

9.2.1.71

YES

ignore

Information Requested

O

9.2.1.74

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

reject

Information Exchange ID

M

9.2.1.71

YES

ignore

CN Domain Indicator

M

9.2.1.5

YES

ignore

Global CN-ID

O

9.2.1.46

YES

ignore

Cause

M

9.2.1.4

YES

ignore

Criticality Diagnostics

O

9.2.1.35

YES

ignore

Message Type

M

9.2.1.1

YES

reject

TMGI

M

9.2.3.37

YES

reject

MBMS Session Identity

O

9.2.3.38

YES

ignore

MBMS Bearer Service Type

M

9.2.3.39