4 Receive only mode

24.1163GPPRelease 17Stage 3 aspects of system architecture enhancements for TV servicesTS

Device in Receive only mode shall:

– be able to receive MBMS broadcast as described in 3GPP TS 23.246 [2]; and

– select the network using the procedure in clause 5.

Device in Receive only mode shall not:

– initiate any signalling procedures with the network; or

– follow the PLMN selection procedures in 3GPP TS 23.122 [4], except for device in Receive only mode with independent unicast, which may perform PLMN selection procedures in 3GPP TS 23.122 [4] for the unicast connection.

NOTE 1: Because of the above requirements, device in Receive only mode does camp on a network as defined in 3GPP TS 36.304 [5] and in 3GPP TS 25.304 [6].

Device in Receive only mode may have:

– USIM with TV service configuration.

NOTE 2: The USIM does not imply the ability to follow the PLMN selection procedures in 3GPP TS 23.122 [4].

The Receive only mode is enabled in the device using implementation-specific means (e.g. factory configuration, user interface).

The requirements for support of MBMS User Service Discovery/Announcement service for Receive only mode are specified in 3GPP TS 26.346 [7].