A.4 Group configuration data
23.1803GPPMission critical services support in the Isolated Operation for Public Safety (IOPS) mode of operationRelease 17TS
As specified in 3GPP TS 23.280 [3], the group configuration data is stored in the group management server. The group management server is used to configure the group configuration data to the MC service UE (CSC-2). The group configuration data can be configured offline using the CSC-12 reference point.
The common group configuration data specified in table A.4-1 in 3GPP TS 23.280 [3] is also used, as needed, in the IOPS mode of operation.
Table A.4-1 described below contains additional group configuration data required to support MC services in the IOPS mode of operation.
Table A.4-1: Group configuration data (IOPS)
Reference |
Parameter description |
MC service UE |
Group management server |
[R-10-001] of 3GPP TS 22.280 [11] |
List of IOPS MC service groups |
Y |
Y |
> IOPS MCPTT Group ID |
|||
Clause 8.1.3 |
>> IOPS group IP multicast address |
Y |
Y |
>> Preferred voice codecs for IOPS MCPTT group |
Y |
Y |
|
>> Indication whether emergency group call is permitted on the IOPS MCPTT group |
Y |
Y |
|
> IOPS MCData Group ID |
|||
Clause 8.1.3 |
>> IOPS group IP multicast address |
Y |
Y |
>> MCData sub-services and features enabled for the group |
|||
>>> Short data service enabled |
Y |
Y |
|
>>> Whether MCData user is permitted to transmit data in the group |
Y |
Y |
|
>>> Maximum amount of data that the MCData user can transmit in a single request during group communication |
Y |
Y |
|
>>> Maximum amount of time that the MCData user can transmit in a single request during group communication |
Y |
Y |